Home New Products

The MRO Data Aggregator

New Products from DGI Supply

IMAGE SPECIFICATION IMAGE MATCHES DATASHEET BRAND DESCRIPTION
41114 41114 Image Match (82) Te-Co TE-CO 41114, Driver Stud, 1-8 x 12", Medium Carbon Steel
Clamping Studs
TT90252 TT90252 Image Match (401) USA #10-32 HSS Hand Tap, Taper, 4-Flute, HSS, Uncoated, H1 Limit, USA Series 725
Straight Flute Taps - General Purpose
CELS348-20 CELS348-20 Image Match (2) Meltblown Technologies Meltblown CELS348-20, General Purpose Cellulose Absorbent Sock, Gray, 3" x 4', 20 socks/pkg
Absorbent Socks
9085240110000 9085240110000 Image Match (155) Technical Data Sheet
546 products
Guhring 11.00mm RT 100 HF High Performance Carbide Drill, nano-Si Coating, 3xD, Guhring Series 8524
HP Drills - Short Length
3318680 3318680 Image Match (110) Osg 6.80mm EXOCARB WH70-DRL Low Helix Jobber Length Carbide Drill, WXS Coating, OSG Series 5171
HP Drills - Standard Length
288188 288188 Image Match (8) Ansell Protective Products HyFlex 11-644, Palm Coated Cut Resistant Gloves, White/Gray, 2X-Large (11)
Cut Resistant Gloves
SMDT2600MTL-C-ACX70 SMDT2600MTL-C-ACX70 Image Match (251) Sumitomo SMDT2600MTL-C-ACX70, 26.0mm Sumitomo Carbide Replaceable Drill Tip
Replaceable Dill Tips & Inserts
10902 10902 Image Match (5) Royal Products Royal Products 10902, Bull Head Live Center, 3MT Taper, 2.52" Dia
Bull Nose Live Centers
02373 02373 Image Match (36) Severance Severance 02373, 5/16" Six Flute HSS Countersink, 60 Deg, Chatterless-Countersinks
Web Visibility Category A
7548892 7548892 Image Match (43) Flyer
343 products
Sandvik DS20-D3015LX31-04 CoroDrill DS20 Indexable Insert Drill, 1.187", 4xD, Cylindrical with Flat
Indexable Drill Bodies
381346179.000 381346179.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-346, 179" Welded Supreme Bi-Metal Band Saw Blade, 1-1/4 x 0.042", 5-8 TPI
Ultra-Premium Blades for High Production Sawing
6612485 6612485 Image Match (22) Sandvik TCMT 3(2.5)3-UR 4315 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
0138801 0138801 Image Match (495) Osg 1/2-20 EXOTAP VA-3 Spiral Flute HSSE Tap, Bottom, 3-Flute, H3, Steam Oxide, OSG Series 303
High Performance Spiral Flute Taps
31229 31229 Image Match (80) Sgs 13/64" Double-End Ball-End Carbide End Mill, 4-Flute, Ti-NAMITE-A (AlTiN) Coated, SGS Series 14B
Double-End Ball-End End Mills
5737563 5737563 Image Match (23) Sandvik Sandvik PTGNR 2020K 16, T-Max P Shank Tool for Turning, Right Hand, 20 x 20mm Shank
Turning Tool Holders
41043 41043 Image Match (2) Kimberly-Clark WypAll X80 41043, HYDROKNIT Jumbo Roll Wipers, Blue, 475 wipes/roll
Web Visibility Category A
66243529338 66243529338 Image Match (2) Norton Norton 37C30-SVK, Toolroom Grinding Wheel - Type 01 Straight, 3-1/2 x 1-1/2 x 7/8", Silicon Carbide
Surface Grinding Wheels
35716-C3 35716-C3 Image Match (90) Harvey Tool 1/4" Harvey Tool Long Reach Stub Flute Ball End Carbide End Mill, 12xD, 3-Flute, AlTiN Coated
Miniature Ball-End End Mills
65099 65099 Image Match (554) Sgs 15.00mm Hi-PerCarb Triple Margin Carbide Drill, 5XD, Uncoated, SGS Series 131N
HP Drills - Standard Length
215-4370 215-4370 Image Match (220) Osg 11.10mm Slow Spiral Jobber Length Carbide Drill, Bright Finish, OSG List 215
Slow Spiral Jobber Length Drills
66261004431 66261004431 Image Match (7) Norton Bear-Tex Rapid Prep 66261004431, Non-Woven Hook & Loop Disc, 2", Hook & Loop, Coarse, Aluminum Oxide
Non-Woven Hook & Loop Discs
335505064.000 335505064.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 335-505, 64" Welded Metal Master Carbon Steel Band Saw Blade, 1/2x0.025", 6C TPI
Blades For General Purpose Sawing
5740169 5740169 Image Match (41) Sandvik RA390-038M32-11L Sandvik, CoroMill 390 Square Shoulder Milling Cutter, 1.500" Cutting Diameter
Indexable Milling Cutter Bodies
CSG0196-C6 CSG0196-C6 Image Match (130) Harvey Tool 0.500mm High Performance Miniature Carbide Drill, 3xD, AlTiN Nano Coated
Micro Drills - Non-Coolant Fed
205851 205851 Image Match (3) Ansell Protective Products Hycron 27-600, Palm Coated Jersey Gloves, Medium (8)
Coated Work Gloves
5750884 5750884 Image Match (3) Sandvik SPEX 12 03 ED R-1 HM Sandvik T-Max , Carbide Insert for Milling, Uncoated
Indexable Milling Inserts
041860 041860 Image Match (115) Precision Twist Drill #60 Size Heavy Duty Screw Machine Length Drill - NAS 907 Type C, HSS, Steam Oxide Finish, 135 Degree, Series R41C
Heavy Duty Screw Machine Length Drills
1400155705 1400155705 Image Match (2594) Osg 3/4-16 HY-PRO NRT HSS-CO Thread Forming Tap, 2.5P Chamfer, H10, TiN Coated, OSG 14001 Series
Thread Forming Taps - General Purpose
TC19216 TC19216 Image Match (163) USA #16 Size Jobber Length Split Point Carbide Drill, Uncoated, USA Series 190
Split-Point Jobber Length Drills
24020 24020 Image Match (229) Harvey Tool Harvey Tool 24020, 5/16" Stub-Flute Long Reach Corner Radius Carbide End Mill, 0.015" CR, 14xD, Uncoated
Miniature Corner Radius End Mills
5735659 5735659 Image Match (13) Sandvik Sandvik MWLNR 12 3C, T-Max P Shank Tool for Turning, Right Hand, 3/4 x 3/4" Shank
Turning Tool Holders
1645096125 1645096125 Image Match (57) Osg 9/16-12 EXOPRO CC-SUS Spiral Flute Tap, 3-Flute, H5, Plug, Vanadium High Speed Steel, TiN Coated, OSG Series 16450
High Performance Spiral Flute Taps
13200045 13200045 Technical Data Sheet
2 products
MSDS Link
2 products
DoALL DoALL KOOL ALL ESS, Semi-Synthetic Cutting & Grinding Fluid, 5 Gallon Pail
Semi-Synthetic Cutting & Grinding Fluids
66261138590 66261138590 Norton Norton 66261138590, Norzon Plus F826 Fibre Disc, 7 x 7/8" AH, 80 Grit, Ceramic Alumina/Zirconia Alumina
Center Arbor Hole Discs
5756640 5756640 Image Match (3) Sandvik WNMG 433-QM 1105 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
BFMF150S-1 BFMF150S-1 Image Match (19) Meltblown Technologies Meltblown BFMF150S-1, Fine Fiber Oil Only Heavy-Weight Absorbent Roll, Blue, 15" x 150 ft, 1 roll/pkg
Absorbent Pads & Rolls
CD60420 CD60420 Image Match (115) USA T Size Heavy-Duty Screw Machine Length Drill - Type J, M42 Cobalt, ALTIN Finish, 135 Degree, Series 602
Heavy Duty Screw Machine Length Drills
5730869 5730869 Image Match (8) Sandvik DNMG 331-PF 5015 Sandvik, T-Max P, Cermet Insert for Turning
Turning Inserts
TC55100 TC55100 Image Match (24) USA 0.100" Ball Nose Stub-Flute Carbide Micro End Mill, 1.5xD, 4-Flute, Uncoated, USA Series 551
Miniature Ball-End End Mills
TC50653 TC50653 Image Match (41) USA 0.060" Corner Radius Carbide Micro Endmill, 0.015" C.R., 4-Flute, Uncoated, USA Series 506
Miniature Corner Radius End Mills
7079854 7079854 Image Match (37) Sandvik Sandvik PS-V40C-45-003 Retention Stud, 5/8-11 UNC Thread
Retention Knobs
9-1008-11 9-1008-11 Image Match (107) Dayton Lamina Danly IEM DieMax XL 9-1008-11, Light Load Die Springs, 5/8 x 2", Green
Die Springs
no image available CNMG432EMU-AC610M Sumitomo CNMG 432 EMU AC610M Sumitomo, Carbide 80° Negative Turning Insert with Hole, 1/2" IC
Turning Inserts
1752601 1752601 Image Match (368) Osg 1/4-20 EXOTAP VC-10 Spiral Flute VC-10 Tap, Modified Bottom, 3-Flute, H3, Steam Oxide, OSG Series 313
High Performance Spiral Flute Taps
1208200 1208200 Image Match (374) Osg #8-36 HSS Spiral Point Plug Tap, H2, 2-Flute, Bright Finish, OSG 105 Series
Spiral Point Taps - General Purpose
8608113 8608113 Image Match (320) Osg 1.13mm VPH GDS Stub Length Powdered Metal Drill, V Coating, ≤3xD, OSG Series 1900
HP Drills - Short Length
6007500 6007500 Image Match (94) Osg #6-40 General Purpose Straight Flute STI Tap, H2, High Speed Steel, Bright, OSG Series 126
Screw Thread Insert Hand Taps
303900171.000 303900171.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-900, 171" Welded, Silencer GP Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for General Purpose Sawing
303300186.000 303300186.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-300, 186" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 8-12 TPI
Premium Blades for General Purpose Sawing
60314H-20CM 60314H-20CM Image Match (81) Allied Machine Allied Machine 60314H-20CM, GEN3SYS, Series 14 Straight Shank Helical Flute Holder, 3xD Length
Replaceable Tip Drills
5415108 5415108 Image Match (46) Osg 1" Square End Cobalt End Mill, 2" L.O.C., 4-Flute, TiCN Coated, OSG Series 541
Square End Endmills
30114 30114 Image Match (166) Sgs 7/64" Ball-End Regular Length Carbide End Mill, 4-Flute, 3/8" LOC, Uncoated, SGS, 1B Series
Ball-End Endmills
00051144050048 00051144050048 Image Match (29) 3M 3M 05004, Cloth Utility Roll 211K, 240 Grit, 1" x 50 yd, Aluminum Oxide
Coated Abrasive Cloth Rolls
285325 285325 Image Match (2) Mitsubishi SEET13T3AGEN-JL VP30RT Mitsubishi, Carbide Insert
Indexable Milling Inserts
44560 44560 Image Match (20) Sgs 25.0mm Square-End Carbide End Mill, 2-Flute, Uncoated, Series 47M
HP Square End Endmills
334581275.000 334581275.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-581, 275" Welded Metal Master Carbon Steel Band Saw Blade, 3/4x0.032", 10 TPI
Blades For General Purpose Sawing
TC74104 TC74104 Image Match (48) USA 1/8" Corner Radius Carbide End Mill, 0.015" CR, 4-Flute, ALTIN Finish, USA 741 Series
Corner Radius Endmills
UU1603DX12 UU1603DX12 Image Match (216) Lift-All Webmaster 1200 Web Sling, Type U - Unilink Each End, 3" x 12',1-Ply Polyester
Web Slings
148-352 148-352 Mitutoyo Mitutoyo 148-352, 0-.25",.001", Micrometer Head,.375"Stem with Clamp Nut, Flat Spindle Face, Large (.59") Thimble Diameter
Vernier Micrometer Heads
5915045 5915045 Image Match (9) Sandvik CNMG431-SM H13A Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
8597547 8597547 Image Match (655) Osg 5.47mm EX-SUS-GOLD Jobber Length HSSE Drill, TiN Coating, OSG Series 1600
HP Drills - Standard Length
UU2603DX19 UU2603DX19 Image Match (216) Lift-All Webmaster 1200 Web Sling, Type U - Unilink Each End, 3" x 19',2 Ply Polyester
Web Slings
51142 51142 Image Match (12) Weiler Tiger Paw 51142, Type 27 Flap Disc, 7" x 5/8-11 Threaded AH, 60 Grit, Zirconia Alumina
Type 27 Coated Abrasive Flap Discs
50340 50340 Image Match (33) KEO CUTTERS 3/4" HSS 3 Flute Center Reamer, Countersink Angle - 100°, Uncoated
Center Reamers
6255524 6255524 Image Match (6) Sandvik 930-HA06-HD-25-110 Sandvik, CoroChuck 930 High Precision Hydraulic Chuck - Heavy-Duty Version, 25 mm bore
Hydraulic Chucks
2411203 2411203 Image Match (16) Osg M8-1.25 HYPRO DC High Performance HSSE Straight Flute Tap for Aluminum, Bottom, D5, Flute, OSG Series 241
High Performance Straight Flute Taps
40129 40129 Image Match (323) Sgs 4.0mm Square-End Regular Length Carbide End Mill, 14.0mm L.O.C., 4-Flute, Uncoated, SGS Series
Square End Endmills
310-001060 310-001060 Image Match (29) Monster Tool Company 3/32" SC-61 Bur, Cylinder - Radius End, Single Cut, Solid Carbide
Web Visibility Category A
5752825 5752825 Image Match (24) Sandvik TCMT 3(2.5)1-KF 3005 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
49312 49312 Image Match (90) Harvey Tool 3/16" Harvey Tool Long Reach Stub Flute Ball End Carbide End Mill, 15xD, 3-Flute, Uncoated
Miniature Ball-End End Mills
954820 954820 Image Match (453) Harvey Tool 5/32" Harvey Tool, Corner Radius Carbide End Mill, 0.020" C.R., 4-Flute, 1.5xD, Uncoated
Miniature Corner Radius End Mills
5736884 5736884 Image Match (18) Sandvik N151.3-A250-60-4G H13A Sandvik, T-Max Q-Cut, Carbide Insert for Grooving, Seat Size - 60
Parting Off, Grooving, Profiling & Turning Inserts
153-202 153-202 Mitutoyo Mitutoyo 153-202, 0-25mm, 0.01mm (0.001mm with Vernier), Micrometer Head, 12mm Plain Stem, Flat Carbide Tipped Spindle Face, Non-Rotating Spindle, Ratchet Stop
Vernier Micrometer Heads
6900105 6900105 Image Match (24) Osg 1/2" Roughing End Mill with Center Hole, 4-Flute, 1-1/4" LOC, 3-1/4" OAL, HSSE, TiN Coated, OSG Series 690
Roughing Endmills
10554432 10554432 Mitsubishi 10.20mm Coolant Thru Micro Size Carbide Drill, DP1020 Coating 2XD, Mitsubishi PILOT-MVS Series
Micro Drills - Coolant Fed
66252843788 66252843788 Image Match (4) Norton Norton 43788, Gemini XXL Type 27 Depressed Center Wheel, 6 x 1/4 x 7/8", Aluminum Oxide
Depressed Center Wheels
49-57-1125 49-57-1125 Image Match (36) Milwaukee Electric Tool Milwaukee 49-57-1125, Threaded Steel Hawg Cutter, 1-1/8 inch
Annular Cutters
440-3BNX 440-3BNX Image Match (21) Apex Apex 440-3BNX, Phillips Hex Insert Bit, #3 Tip Size, 1-1/4" L, 1/4" Drive
Insert Bits
8693010 8693010 Image Match (859) Flyer
1623 products
Osg 10.10mm OSG A Brand ADO Jobber Length Coolant-Fed Carbide Drill, EgiAs Coated, 5XD, Series 6510
HP Drills - Standard Length - Coolant Fed
37178-C3 37178-C3 Image Match (229) Harvey Tool Harvey Tool 37178-C3, 5/64" Stub-Flute Long Reach Corner Radius Carbide End Mill, 0.005" CR, 5xD, AlTiN Coated
Miniature Corner Radius End Mills
19T5429 19T5429 Image Match (20) Flyer
908 products
Sumitomo CNMM644ENP-AC5015S Sumitomo, 80° Negative Carbide Turning Insert with Hole, 3/4" IC
Turning Inserts
5765060 5765060 Image Match (26) Sandvik Sandvik 570-40R151.3-09-50, T-Max Q-Cut Head for Grooving, 14mm LF
Parting & Grooving Tool Holders
301739150.250 301739150.250 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-739, 150.25" Welded Penetrator Bi-Metal Band Saw Blade, 1-1/4x0.042", 3-4 TPI
Premium Blades for High-Production Sawing
051351 051351 Image Match (91) Precision Twist Drill 51/64" Heavy-Duty Cobalt Taper Length Drill, Bronze Oxide Finish, 135° Split-Point, Precision Twist Drill M51CO Series
Heavy Duty Taper Length Drills
5909110 5909110 Image Match (4) Sandvik WNMG432-SMR 1125 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
108736 108736 Mitsubishi Mitsubishi TS254, Clamp Screw - T8, M2.5 x.018
Fasteners & Hardware
543-471B 543-471B Mitutoyo Mitutoyo 543-471B, Digimatic Indicator ID-C - Standard Type, 0 - 1", 0 - 25.4mm, Flat back
Digital Indicators
PF-4-36 PF-4-36 Image Match (19) Western Enterprises Western Enterprises PF-4-36, Flexible Pigtail
Welding Hose & Compressed Gas Fittings
556068 556068 Mitsubishi 13.3mm Mitsubishi Solid Carbide Internal Coolant Drill, 5XD, Grade DP7020, MMS Series
HP Drills - Standard Length - Coolant Fed
137-220 137-220 Image Match (2) Mitutoyo Mitutuyo 137-220, Tubular Inside Micrometer - Extension Rod Type, 2 - 60 Inch, Carbide Tipped Face
Tubular Inside Micrometers
6612446 6612446 Image Match (79) Sandvik TCMT 1.8(1.5)1-PF 4315 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
6239287 6239287 Image Match (189) Sandvik 870-1640-16-KM 3234, 16.40mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
0781-0354 0781-0354 Image Match (2) Victor Victor SR 312 High Flow CO2 Flowgauge
Regulators & Flowmeters
9055110040400 9055110040400 Image Match (196) Guhring #21 Size, RT 100 U Coolant-Through Carbide Drill, 5XD, FIREX Coated, Guhring Series 5511
HP Drills - Standard Length - Coolant Fed
5731923 5731923 Image Match (19) Sandvik Sandvik DTGNL 16 4D, T-Max P Shank Tool for Turning, Left Hand, 1 x 1" Shank
Turning Tool Holders
9085220114000 9085220114000 Image Match (81) Technical Data Sheet
546 products
Guhring 11.40mm RT 100 HF Coolant-Through Carbide Drill, 7xD, nano-Si Coated, Guhring Series 8522
HP Drills - Standard Length - Coolant Fed
5226100 5226100 Image Match (51) Osg 11/64" Double-End Square-End Cobalt HSS End Mill, Bright Finish, 2-Flute, OSG Series 522
Double-End Square-End End Mills
5710597 5710597 Image Match (29) Widia VSM490D250Z07S100XN15 Widia, Victory VSM490-15 Shell Mill, 2.50" Cutting Diameter
Indexable Milling Cutter Bodies
3002800 3002800 Image Match (6) Osborn Osborn 30028 Knot Wire End Brush - Scuf-Gard Coated, 1/2 Inch Dia., 0.0104 Inch Stainless Steel Wire, 1/4 Inch Stem
Knotted Wire End Brushes
00048011175447 00048011175447 3M Scotch-Brite 17544, Surface Conditioning Low Stretch Belt, 19 x 60", Very Fine Grade, Aluminum Oxide
Surface Conditioning Low Stretch Belt
U10 71940 U10 71940 Image Match (477) Komet KOMET U10 71940, 0.765", KUB Quatron, ABS50 Shank Indexable Insert Drill, 2xD
Web Visibility Category A
20151011 20151011 Image Match (18) Osg 1/2" EXOCARB-Aero ROUGHER, Carbide Rougher, 4-Flute, 1-1/4" L.O.C., 0.125" CR, OSG Series 2015
HP Roughing & Finishing End Mills
7080718 7080718 Image Match (79) Sandvik TCMT 432-PM 4335 Sandvik, CoroTurn 107 Carbide Insert for Turning
Turning Inserts
5741449 5741449 Image Match (10) Sandvik R123F2-0250-0502-CM 2135 Sandvik, CoroCut 1-2, Carbide Insert for Parting, Seat Size - F
Parting Off, Grooving, Profiling & Turning Inserts
03041 03041 Image Match (315) M.A. Ford M.A. FORD 03041, 0.0470", TrueSize Carbide Reamer, 4-Flute, Series 272
Chucking Reamers
28032 28032 Image Match (271) Precision Brand Products Precision Brand 28032, 57/64" Diameter O-1, Oil Hardening Drill Rod, 36" Length
Drill Rod
SKN-6WB SKN-6WB Image Match (4) Lyndex-Nikken Lyndex SKN-6WB, Standard Style Replacement Nut for SK6 Collet Chuck
Collet Accessories
TC53300 TC53300 Image Match (25) USA 0.100" Ball Nose Stub-Flute Carbide Micro End Mill, 1.5xD, 2-Flute, ALTIN Coated, USA Series 532
Miniature Ball-End End Mills
EN2804DX20 EN2804DX20 Image Match (366) Lift-All Webmaster 1600 Endless Web Sling, , 4" x 20',2 Ply Polyester
Web Slings
1756001 1756001 Image Match (7) Osg M6x1 ExOTAP VA-3 Spiral Flute Tap, 3-Flute, D5, Plug, HSSE, Steam Oxide Coated, OSG Series 343
High Performance Spiral Flute Taps
6422852 6422852 Image Match (136) Sandvik 7.10mm CoroDrill 860 Jobber Length Coolant Fed Carbide Drill, 5xD, TiAlN Coated
HP Drills - Standard Length - Coolant Fed
6241252 6241252 Image Match (533) Sandvik 6.60mm CoroDrill 460, Coolant Through Solid Carbide Drill, 3XD, TiAlN Coated
HP Drills - Short Length - Coolant Fed
310-950B-LY/5X 310-950B-LY/5X Image Match (8) Technical Data Sheet
8 products
Pip PIP 310-950B, Non-ANSI Short Sleeve T-Shirt, Hi-Vis Yellow/Black Trim, 5X-Large
Hi-Vis Apparel
9057600063500 9057600063500 Image Match (161) Technical Data Sheet
361 products
Guhring 1/4" RT 100 S Coolant-Fed Carbide Drill, nano-FIREX Coated Tip, 8xD, Guhring Series 5760
HP Drills - Standard Length - Coolant Fed
6612376 6612376 Image Match (31) Sandvik CCMT 431-WM 4315 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
00051115331435 00051115331435 Image Match (39) Standard Abrasives Standard Abrasives 840709, Type GP Buff & Blend Disc with Arbor Hole, 6", 1/2" Arbor Hole, Fine, Aluminum Oxide
Non-Woven Center Arbor Hole Discs
1226808 1226808 Image Match (374) Osg 3/8-24 HSS Spiral Point Plug Tap, H2, 3-Flute, TiCN Coated, OSG 105 Series
Spiral Point Taps - General Purpose
9064010008500 9064010008500 Image Match (55) Guhring 0.85mm Micro-Precision Carbide Drill, 7XD, Super-A Coated, Guhring 6401 Series
Micro Drills - Non-Coolant Fed
9002080022000 9002080022000 Image Match (331) Guhring 2.200mm Left-Hand Jobber Length HSS Drill, Bright Finish, Guhring Series 208
Left-Hand Jobber Length Drills
1400132501 1400132501 Image Match (2594) Osg 5/16-24 HY-PRO NRT HSS-CO Thread Forming Tap, 1.5P Chamfer, H7, Steam Oxide Coated, OSG 14001 Series
Thread Forming Taps - General Purpose
0200-0225 0200-0225 Image Match (9) Victor Victor 0200-0225 VCM 201HS High Speed Portable Cutting Machine, 5-120 inches/minute, 3-Hose Manifold Block
Cutting Machines
CL-70-SPS-1 CL-70-SPS-1 Image Match (71) Carr Lane Carr Lane CL-70-SPS-1, Heavy-End Force Standard Spring Plunger, 1/2-13 x 1-1/4", Steel Body, Steel Nose
Spring Plungers
34521 34521 Image Match (34) Sgs 5/8" Ski-Carb Corner Radius Carbide End Mill, Uncoated, 2-Flute, Weldon Shank, 0.015 - 0.125" C.R., SGS Series 44
HP Corner Radius End Mills
303420177.000 303420177.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-420, 177" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 10-14 TPI
Premium Blades for General Purpose Sawing
MDW03594HGS5 MDW03594HGS5 Image Match (515) Sumitomo 23/64" Coolant Through Solid Carbide Drill, PVD DEX Coated, 5XD, Sumitomo Series MDW-HGS5
HP Drills - Standard Length - Coolant Fed
051528 051528 Image Match (29) Precision Twist Drill 7/16" HSS High Helix Taper Length Drill, Bright Finish, Precision Twist Drill R51FS Series
Standard Taper Length Drills
0145501 0145501 Image Match (495) Osg #10-24 EXOTAP VA-3 High Performance Spiral Flute HSSE STI Tap, 3-Flute, H2, 1.5P-2P Chamfer, Steam Oxide Coating, OSG Series 302
Screw Thread Insert Spiral Flute Taps
1000008 1000008 Image Match (555) Osg #0-80 General Purpose HSS Straight Flute Hand Tap, Taper, 2-Flute, H1, TiCN Coating, OSG Series 102
Straight Flute Taps - General Purpose
0387-0011 0387-0011 Image Match (2) Victor Victor 03870011 VanGuard Medium Duty
Torches & Handles
MDW0930HGS5 MDW0930HGS5 Image Match (515) Sumitomo 9.3mm Coolant Through Solid Carbide Drill, PVD DEX Coated, 5XD, Sumitomo Series MDW-HGS5
HP Drills - Standard Length - Coolant Fed
30817 30817 Image Match (4) WIHA Wiha 30817, Cushion Grip Slotted Screwdriver, 0.255 Inch (6.5mm) x 3.9 inch
Web Visibility Category A
36035 36035 Image Match (7) Proto Proto J07515L, 6-Point Deep Impact Socket - Inch, 3/4 Inch Drive, Size: 15/16 Inch
Sockets - Impact
029110 029110 Image Match (275) Precision Twist Drill 11.0mm Jobber Length HSS Drill, Steam Oxide Coated, Precision Twist Drill Series 2AB
Standard Jobber Length Drills
66253044198 66253044198 Image Match (2) Norton Norton 32A60-GVBEP, Toolroom Grinding Wheel - Type 01 Straight, 8 x 3/4 x 1-1/4", Aluminum Oxide
Surface Grinding Wheels
CD30238 CD30238 Image Match (115) USA #38 Size Heavy-Duty Screw Machine Length Drill - Type C, HSS, Black Oxide Finish, 135 Degree, Series 300
Heavy Duty Screw Machine Length Drills
17219-C3 17219-C3 Image Match (121) Harvey Tool 7/32" Double-Ended Corner Rounding Carbide Endmill, Flared, 0.058" Pilot Dia., 2 -Flute, AlTiN Coated
Miniature Corner Rounding End Mills
61463686600 61463686600 Norton Norton HF43, Square File, 1/2 X 3", Ultra Fine, Hard Arkansas
Sharpening Stones
1662500017 1662500017 Image Match (62) Osg A Brand AT-1, 1/4-20 Advanced Performance One Pass Carbide Thread Mill, 4-Flute, EgiAs Coating
Threadmills
5723990 5723990 Image Match (39) Sandvik CCMT 2(1.5)1-PM 1525 Sandvik, CoroTurn 107, Cermet Insert for Turning
Turning Inserts
EE1804NTX5 EE1804NTX5 Image Match (368) Lift-All Webmaster 1600 Web Sling, Eye & Eye - Twisted, 4" x 5',1-Ply Nylon
Web Slings
CL-5-HK4T CL-5-HK4T Image Match (16) Carr Lane Carr Lane CL-5-HK4T, Hand Knob Assembly, Thread Size - 3/8-16
Four-Prong-Knobs
308247089.500 308247089.500 Image Match (1543) Flyer
16185 products
DoALL DoALL 308-247, 89.5" Welded, Dart Carbon Steel Band Saw Blade, 1/2x0.025", 6 TPI
Blades For Non-Production Sawing
1400119401 1400119401 Image Match (2594) Osg #10-24 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, H6, Steam Oxide Coated, OSG 14001 Series
Thread Forming Taps - General Purpose
9041120150800 9041120150800 Image Match (141) Guhring Guhring 9041120150800, 19/32", HT 800 WP Interchangeable Drill Insert, Body Size 150
Replaceable Dill Tips & Inserts
TR96393 TR96393 Image Match (1395) USA USA 26607, #17 Size, M42 Cobalt Chucking Reamer, 6-Flute, Series 1933
Chucking Reamers
68047 68047 Image Match (102) Harvey Tool 3/64" Double-Ended Corner Rounding Carbide Endmill, Flared, 0.107" Pilot Dia., 4 -Flute, Uncoated
Miniature Corner Rounding End Mills
83481000 83481000 Image Match (17) Simonds Simonds 83481000 Barrette Style Needle File, 4 Inch, #0 Cut
Needle Files
041315 041315 Image Match (115) Precision Twist Drill #15 Size Heavy Duty Screw Machine Length Drill, Cobalt, Bronze Oxide Finish, 135 Degree, Series M41CO
Heavy Duty Screw Machine Length Drills
5725501 5725501 Image Match (63) Sandvik CNMG 644-PM 4205 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
EE1801TFX16 EE1801TFX16 Image Match (1156) Lift-All Tuff-Edge EE1801TFX16, Web Sling Eye & Eye - Flat, 1-Ply 1" x 16'
Web Slings
TC56216 TC56216 Image Match (108) USA 0.016" Square-End Carbide Micro Endmill, ALTIN, 2-Flute, USA Series 562
Miniature Square-End End Mills
802863 802863 Image Match (4) Mitsubishi SNMG 433RS MP9015 Mitsubishi, Carbide, 90° Negative Insert with Hole, 1/2" IC
Turning Inserts
6241376 6241376 Image Match (290) Sandvik 4.30mm CoroDrill 460 Solid Carbide Drill, TiAlN Coating, 3xD
HP Drills - Short Length
66243529954 66243529954 Image Match (9) Norton Norton 38A100-KVBE, Toolroom Grinding Wheel - Type 01 Straight, 4 x 1/2 x 1/2", Aluminum Oxide
Surface Grinding Wheels
HP245-1299 HP245-1299 Image Match (345) Osg 3.30mm Jobber Length Performance Carbide Drill, TiALN Coated, 5XD, OSG Series HP245
HP Drills - Standard Length
61463686125 61463686125 Norton Norton FF56, Square File, 5/8 X 6", Fine, India (Aluminum Oxide)
Sharpening Stones
653520312 653520312 Image Match (859) Flyer
1623 products
Osg 13/64" OSG A Brand ADO Taper Length Coolant-Fed Carbide Drill, EgiAs Coated, 15XD, Series 6535
HP Drills - Extra Long - Coolant Fed
301085340.000 301085340.000 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-085, 340" Welded Penetrator Bi-Metal Band Saw Blade, 2x0.063", 3-4 TPI
Premium Blades for High-Production Sawing
70105716 70105716 Image Match (16) Osg 1/8" Regular Length Ball-End Carbide End Mill, Diamond Coated, 2-Flute, OSG 70105716, Series 7010
HP Ball-End End Mills
SC12-6 SC12-6 Image Match (16) Goss Goss 2276-6 Tip Smith SC-12
Tips & Nozzles
6967035 6967035 Image Match (372) Sandvik M8x1.25 M CoroTap 300 Spiral Flute HSS-PM Tap, 3-Flute, C-Chamfer, 6H, AlCrN Coated
High Performance Spiral Flute Taps
9006690028000 9006690028000 Image Match (90) Guhring 2.800mm Guhring Heavy-Duty Split-Point Taper Length Cobalt Drill, 10xD, TiN Coated, Series 669
Heavy Duty Taper Length Drills
TR96067 TR96067 Image Match (1395) USA #29 Size HSS Chucking Reamer, 4-Flute, 1" LOC, USA Series 933
Chucking Reamers
9006050048000 9006050048000 Image Match (339) Guhring #12 Size Jobber Length Type Ti Cobalt Drill, Bright Finish, Guhring Series 605
HP Drills - Standard Length
5751292 5751292 Image Match (6) Sandvik SPU 322 2025 Sandvik, T-Max, Carbide Insert for Turning
Turning Inserts
TC20204 TC20204 Image Match (117) USA #4 Size Stub Length Carbide Drill, Uncoated, 135 Deg Split Point, 15 Deg Helix, USA Series 200
Heavy Duty Screw Machine Length Drills
5739199 5739199 Image Match (18) Sandvik Sandvik PSSNR 4040S 25, T-Max P Shank Tool for Turning, Right Hand, 40 x 40mm Shank
Turning Tool Holders
6256379 6256379 Image Match (108) Sandvik 7.6mm CoroDrill Delta-C Coolant Through Solid Carbide Drill, 3XD, TiAlN Coated
HP Drills - Short Length - Coolant Fed
33427-C3 33427-C3 Image Match (66) Harvey Tool 0.027" Harvey Tool Long Reach Stub Flute Ball End Carbide End Mill, 5xD, 3-Flute, AlTiN Coated
Miniature Ball-End End Mills
6260038 6260038 Image Match (22) Sandvik 3.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 2-Flute, UNCOAT Coated, 0.15mm Corner Radius
HP Corner Radius End Mills
TE66271 TE66271 Image Match (13) USA 1-1/8" Fine Pitch Roughing Cobalt End Mill, Non-Center Cutting, 6-Flute, ALTIN Coated, USA Series 831
Roughing Endmills
54022 54022 Image Match (6) WIHA Wiha 54022, 5/16" Screw Holding Ergo T-handle Hex Driver
Web Visibility Category A
TC62948 TC62948 Image Match (7) USA 3/4" Regular Length Square-End Carbide End Mill, 3-Flute, ZRN Finish, USA 629 Series
HP Aluminum Cutting End Mills
BGN0393-C6 BGN0393-C6 Image Match (85) Harvey Tool 10.000mm High Performance Miniature Carbide Drill, 5xD, AlTiN Nano Coated
Micro Drills - Non-Coolant Fed
301748179.500 301748179.500 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-748, 179.5" Welded Penetrator Bi-Metal Band Saw Blade, 1-1/4x0.042", 4-6 TPI
Premium Blades for High-Production Sawing
5756265 5756265 Image Match (6) Sandvik WCMX 08 04 12-58 3040 Sandvik, Coromant U Insert for Drilling, Size 08
Indexable Drill Inserts
1732605 1732605 Image Match (495) Osg 1/4-20 EXOTAP VA-3 Spiral Flute HSSE Tap, Modified Bottom, 3-Flute, H3, TiN, OSG Series 303
High Performance Spiral Flute Taps
63642595470 63642595470 Norton Norton 63642595470, Blaze R980P Quick-Change Cloth Disc, 2" x TR (Type III), 36 Grit, Ceramic Alumina
Quick Change Discs
42210 42210 Image Match (82) Precision Brand Products Precision Brand 42210, 2" x 2" x 0.002" Stainless Steel Slotted Shim, 20/pkg
Slotted Shim
58505 58505 Flyer
7 products
Dynabrade Dynabrade 58505, Dynabug II 3-1/4 x 5" Central-Vacuum Orbital Sander, 0.15 HP, 10000 RPM, 3/32" Orbit
Pneumatic Orbital Sanders
9085110057000 9085110057000 Image Match (150) Technical Data Sheet
150 products
Guhring 5.700mm RT 100 VA Coolant-Through Carbide Drill, 5XD, nano-A Coated, Guhring Series 8511
HP Drills - Standard Length - Coolant Fed
EN2606NX3 EN2606NX3 Image Match (368) Lift-All Webmaster 1200 Endless Web Sling, , 6" x 3',2 Ply Nylon
Web Slings
74350-C3 74350-C3 Image Match (127) Harvey Tool 0.050" Harvey Tool Miniature Ball End Carbide End Mill, 4-Flute, 3xD, AlTiN Coated
Miniature Ball-End End Mills
66261018641 66261018641 Image Match (6) Norton Bear-Tex 66261018641, Non-Woven Convolute Wheel, 8 x 1 x 3", Fine Grade, 9 Density, Silicon Carbide
General Purpose Wheels
1067200 1067200 Image Match (53) Osg #5-40 Straight Flute HSS Hand Tap, 3.5P - 4.5P Chamfer, H2, 2-Flute, Bright Finish, OSG Series 104
Straight Flute Taps - General Purpose
100TG-NUT 100TG-NUT Image Match (4) Lyndex-Nikken Lyndex 100TG-NUT, Complete Replacement Nut for 100TG Collet Chuck
Collet Accessories
3334323 3334323 Image Match (157) Flyer
1623 products
Osg 4.60mm OSG A Brand ADFLO Stub-Length Coolant-Through Carbide Flat Drill, 3xD, EgiAs Coating, Series 5720
HP Drills - Flat Hole Drills
5735851 5735851 Image Match (98) Sandvik MB-09G300-00-17L 1025 Sandvik, CoroCut MB, Carbide Insert for Grooving, Seat Size - 09
Parting Off, Grooving, Profiling & Turning Inserts
8690410 8690410 Image Match (859) Flyer
1623 products
Osg 4.10mm OSG A Brand ADO 3D Stub-Length Coolant-Through Carbide Drill, EgiAs Coated, 3XD, Series 6500
HP Drills - Short Length - Coolant Fed
335348080.750 335348080.750 Image Match (2193) Flyer
16185 products
DoALL DoALL 335-348, 80.75" Welded Metal Master Carbon Steel Band Saw Blade, 1/4x0.025", 4C TPI
Blades For General Purpose Sawing
319375198.000 319375198.000 Image Match (2479) Flyer
16185 products
DoALL DoALL 319-375, 198" Welded Penetrator TiN Coated Bi-Metal Band Saw Blade, 1-1/2x0.050", 4-6 TPI
Premium Blades for High-Production Sawing
9003010009000 9003010009000 Image Match (219) Guhring 0.900mm Micro-Precision (Type N) Cobalt Drill, Bright Finish, Guhring Series 301
Micro Drills - Non-Coolant Fed
5725606 5725606 Image Match (83) Sandvik CNMG 866-PR 4215 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
54833 54833 Image Match (554) Sgs 21/32" Hi-PerCarb Triple Margin Carbide Drill, 5XD, Ti-NAMITE-B Coated, SGS Series 131N
HP Drills - Standard Length
018684 018684 Image Match (97) Precision Twist Drill #84 Size Jobber Length HSS Drill, Bright Finish, Precision Twist Drill Series R18P
Standard Jobber Length Drills
3332780 3332780 Image Match (83) Osg 7.80mm OSG A Brand ADFLS Long Shank Carbide Flat Drill, 2XD, EgiAs Coating, Series 5705
HP Drills - Flat Hole Drills
335422119.000 335422119.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 335-422, 119" Welded Metal Master Carbon Steel Band Saw Blade, 3/8x0.025", 6C TPI
Blades For General Purpose Sawing
333026236.000 333026236.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-026, 236" Welded, Silencer Plus Bi-Metal Band Saw Blade, 1/2x0.035", 6 (claw tooth) TPI
Premium Blades for Multi-Purpose Sawing
TR94756 TR94756 Image Match (1395) USA 0.4505" HSS Chucking Reamer, 6-Flute, 1-3/4" LOC, USA Series 933
Chucking Reamers

* all information within this site (including price data) is provided as general guidance, with no guarantee of completeness, accuracy, or timeliness. For detailed specifications please review the product pdf datasheet where available.

Created:
Last modified: