Home New Products

The MRO Data Aggregator

New Products from DGI Supply

IMAGE SPECIFICATION IMAGE MATCHES DATASHEET BRAND DESCRIPTION
J4711M J4711M Image Match (46) Proto Proto J4711M, 6-Point Standard Length Socket, 1/4" Drive, Size: 11mm, Full Polish Finish
Tools, Instruments, & Hardware
40505 40505 Image Match (82) Te-Co TE-CO 40505, Driver Stud, 3/8-16 x 3-1/2", Medium Carbon Steel
Clamping Studs
U44 64130 U44 64130 Image Match (399) Komet KOMET U44 64130, 41.3mm, KUB Pentron, ABS63 Shank Indexable Insert Drill, 4xD
Web Visibility Category A
303539165.000 303539165.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-539, 165" Welded, Silencer GP Bi-Metal Band Saw Blade, 1-1/4x0.042", 5-8 TPI
Premium Blades for General Purpose Sawing
682689 682689 Image Match (166) Mitsubishi 0.500" iMX-C4HV Exchangeable Head End Mill - Corner Radius Head, 12mm Thread, 4-Flute
Exchangeable End Mill Heads
00021200043048 00021200043048 Technical Data Sheet
3 products
3M 3M 477, Vinyl Tape, Transparent, 2 in x 36 yd, 7.2 mil
Industrial and General Purpose Vinyl Tape
10271 10271 Image Match (21) Whitney Tool Whitney Tool 910060, Straight Tooth Dovetail Milling Cutter, 60 Degree, 1 x 7/16", 10T, HSS, Uncoated
Dovetail Milling Cutters
5736362 5736362 Image Match (7) Sandvik Sandvik MS-RF151.23-13-25, T-Max Q-Cut Cartridge for Parting and Grooving, 2.17" LF
Parting & Grooving Tool Holders
185-000X 185-000X Image Match (13) Apex Apex 185-000X, Socket Head Hex Insert Bit, 0.050 Inch Tip Size, 1" L, 1/4" Drive
Insert Bits
MDW1010HGS5 MDW1010HGS5 Image Match (515) Sumitomo 10.1mm Coolant Through Solid Carbide Drill, PVD DEX Coated, 5XD, Sumitomo Series MDW-HGS5
HP Drills - Standard Length - Coolant Fed
303133089.000 303133089.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-133, 89" Welded, Silencer GP Bi-Metal Band Saw Blade, 1/2x0.025", 10-14 TPI
Premium Blades for General Purpose Sawing
018573 018573 Image Match (80) Precision Twist Drill #73 Size Jobber Length HSS Drill, Bright Finish, Precision Twist Drill Series R18H
Standard Jobber Length Drills
303934174.000 303934174.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-934, 174" Welded, Silencer GP Bi-Metal Band Saw Blade, 1/2x0.035", 6-10 TPI
Premium Blades for General Purpose Sawing
5350500 5350500 Image Match (11) Osg 3/8" High Performance Cobalt HSS End Mill, 2 Flute, Weldon Flat, Bright Finigh, OSG Series 535
HP Aluminum Cutting End Mills
650015211 650015211 Image Match (859) Flyer
1623 products
Osg 3.86mm OSG A Brand ADO 3D Stub-Length Coolant-Through Carbide Drill, EgiAs Coated, 3XD, Series 6500
HP Drills - Short Length - Coolant Fed
6966806 6966806 Image Match (372) Sandvik 5/16-24 UNF CoroTap 300 Spiral Flute HSS-PM Tap, 3-Flute, C-Chamfer, 3BX, AlCrN Coated
High Performance Spiral Flute Taps
69014192770 69014192770 Image Match (109) Norton Norton ASD180-R75B99-1/4, Type 1A1 Straight Diamond Wheel, 6 x 1/4 x 1-1/4" 180 Grit
Straight Wheels
71-3618/M 71-3618/M Image Match (4) Technical Data Sheet
4 products
Pip PIP 71-3618, Premium Grade Top Grain Goatskin Leather Drivers, Medium
Leather Gloves
9057590092500 9057590092500 Image Match (200) Technical Data Sheet
361 products
Guhring 9.25mm RT 100 S Coolant-Fed Carbide Drill, nano-FIREX Coated Tip, 5xD, Guhring Series 5759
HP Drills - Standard Length - Coolant Fed
9057590182600 9057590182600 Image Match (200) Technical Data Sheet
361 products
Guhring 23/32" RT 100 S Coolant-Fed Carbide Drill, nano-FIREX Coated Tip, 5xD, Guhring Series 5759
HP Drills - Standard Length - Coolant Fed
1410105905 1410105905 Image Match (2594) Osg M12-1.75 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, D11, TiN Coated, OSG 14101 Series
Thread Forming Taps - General Purpose
401040366 401040366 Image Match (11) Greenlee Diamond Tool Greenlee Diamond 401040366, Round Diamond Needle File, Fine Grit
Diamond Needle Files
10542347 10542347 Mitsubishi 5.30mm Solid Carbide Internal Coolant Drill, 20XD, 6mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Extra Long - Coolant Fed
00021200243868 00021200243868 3M 3M VHB Tape 4926 Gray, 1 in x 72 yd 15.0 mil
Foam Tape
3300114 3300114 Image Match (401) Osg 1.14mm EXOCARB MAX-MINI WX-MS-GDS High Performance Miniature Carbide Drill, TiALN Coated, OSG Series 5330
Micro Drills - Non-Coolant Fed
5751635 5751635 Image Match (20) Sandvik Sandvik SVJBL 16 3D, CoroTurn 107 Shank Tool for Turning, Left Hand, 1 x 1" Shank
Turning Tool Holders
9003050038000 9003050038000 Image Match (422) Guhring #25 Size General Purpose Jobber Length Cobalt Drill, 5XD, Steam Oxide Coated, Guhring Series 305
Standard Jobber Length Drills
00051115352935 00051115352935 Image Match (52) Standard Abrasives Standard Abrasives 877009, Unitized Mounted Point, B121, 1/2 x 1/2", 1/8" Shank, Aluminum Oxide
Abrasive Mounted Points
JSM6195B JSM6195B Image Match (2) Jet JET JSM-6195B, Pro-Duty Wheel Angle Grinder, 5",.5 hp, 11000 RPM
Pneumatic Wheel Grinders
10545041 10545041 Mitsubishi 6.90mm Solid Carbide Internal Coolant Drill, 30XD, 7mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Extra Long - Coolant Fed
50048011195983 50048011195983 Image Match (5) 3M Scotch-Brite 19598, EXL Deburring Wheel, 8 x 25 x 3", 8A MED, Aluminum Oxide
EXL Wheels
15168-B854 15168-B854 Image Match (24) F&D TOOL F&D TOOL 15168-B854, HSS Screw Slotting Saw, 2-1/4 x 0.051 x 5/8", 72 Teeth
Slotting Saws
334449183.000 334449183.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-449, 183" Welded Metal Master Carbon Steel Band Saw Blade, 1/2x0.025", 18 TPI
Blades For General Purpose Sawing
6765276 6765276 Image Match (179) Sandvik CXS-04T098-00-0502L 1025 Sandvik, Carbide CoroTurn XS Turning Insert
Turning Inserts
TC23837 TC23837 Image Match (28) USA 7/16" Vi-Pro Variable Index Corner Radius Carbide End Mill, ALCRO-Max Coating, 4-Flute, 0.060" C.R., USA Series V42LR
HP Corner Radius End Mills
EE2802THTX22 EE2802THTX22 Image Match (1156) Flyer
2278 products
Lift-All TUFF-EDGE III EE2802THT Polyester Web Sling, 2" x 22', 2-Ply, Flat Tapered Cordura Fully Lined Eyes
Web Slings
2932001 2932001 Image Match (291) Osg 7/16-14 HY-PRO Spiral Flute Tap, 3-Flute, H3, Modified Bottom, HSSE, Steam Oxide Coated, OSG Series 290
High Performance Spiral Flute Taps
5737181 5737181 Image Match (37) Sandvik N151.2-300-25-4G 235 Sandvik, T-Max Q-Cut, Carbide Insert for Grooving, Seat Size - 25
Parting Off, Grooving, Profiling & Turning Inserts
325373093.000 325373093.000 Image Match (175) Flyer
199 products
DoALL DoALL 325-373, 93" Welded Tungsten Grit Band Saw Blade, 1/2 x 0.025", Medium Grit, Segmented Edge
Tungsten Grit Band Saw Blades
50591 50591 Starrett Starrett 159M, 28-Leaf Metric Screw Pitch Gage, 0.50 to 11.5
Screw Pitch Gages
5733676 5733676 Sandvik LDHT 19 04 00-PL 1030 Sandvik T-Max , Carbide Long Edge Insert for Milling, TiAlN Coating
Indexable Milling Inserts
64650 64650 Image Match (554) Sgs 8.00mm HI-PERCARB Triple Margin Carbide Drill, Uncoated Coating, 3xD, SGS Series 131N
HP Drills - Short Length
6660378 6660378 Image Match (70) Sandvik 880-D0770L50-03 CoroDrill 880 Indexable Insert Drill, 77.00mm, 3xD, Cylindrical Shank with Flat
Indexable Drill Bodies
80-L5-250 80-L5-250 Image Match (16) Link Industries Unidapt 80-L5-250, UA3 Straight Shank Tool Holder Adapter, 3-1/2" OAL
Taper Shank Centerdrill Adaptors
no image available HD6C-JAWKIT Kurt Kurt HD6C-JAWKIT, High Iron Jaw Kit, 1.73" High
Milling Vise Jaws
8T210X18 8T210X18 Image Match (70) Lift-All Roughneck Wire Mesh Sling, 8T110X18 8" X 18' TRI/TRI
Wire Mesh Slings
5782651 5782651 Image Match (8) Sandvik Sandvik SL70-L123K40B168A-HP, CoroCut 1-2 Head for Face Grooving, 20mm LF
Parting & Grooving Tool Holders
5743457 5743457 Image Match (33) Sandvik 20.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 4-Flute, (Ti,Al)N2 Coated
HP Square End Endmills
no image available BT50-SK6-165 Lyndex-Nikken Lyndex-Nikken BT50-SK6-165, BT SK Collett Chuck, BT50 x SK6, 6.496" Projection
Milling Collet Chucks
TR94018 TR94018 Image Match (1395) USA 0.0220" HSS Chucking Reamer, 3-Flute, 1/2" LOC, USA Series 933
Chucking Reamers
9003050065000 9003050065000 Image Match (422) Guhring 6.50mm General Purpose Jobber Length Cobalt Drill, 5XD, Steam Oxide Coated, Guhring Series 305
Standard Jobber Length Drills
53112 53112 Image Match (83) Royal Products Royal Products 53112, Ultra-Precision ER25 Collet, 13/32 Inch
Individual Collets
9055140131000 9055140131000 Image Match (188) Guhring 33/64" Stub Length High-Performance Solid Carbide Drill, FIREX Coating, 3xD, Guhring Series 5514
HP Drills - Short Length
5724139 5724139 Image Match (3) Sandvik CCMT 3(2.5)1-UM H13A Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
455-1000 455-1000 Image Match (31) Osg 1" Square End Carbide End Mill, 1-1/2" LOC, 5-Flute, Bright Finish, OSG Series 455C
Square End Endmills
373608 373608 Mitsubishi 11.50mm Mitsubishi Solid Carbide Internal Coolant Drill, 3XD, VP15TF Coated, MWS-MB Series
HP Drills - Short Length - Coolant Fed
EN2604NX8 EN2604NX8 Image Match (368) Lift-All Webmaster 1200 Endless Web Sling, , 4" x 8',2 Ply Nylon
Web Slings
334409174.000 334409174.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-409, 174" Welded Metal Master Carbon Steel Band Saw Blade, 1/2x0.025", 10 TPI
Blades For General Purpose Sawing
TSEN150X20 TSEN150X20 Image Match (14) Lift-All Tow-All Tuflex TSEN150X20, Vehicle Recovery Strap, Red, 20', WLL 22000 lbs
Tow Straps
00051115326943 00051115326943 Image Match (46) Standard Abrasives Standard Abrasives 541059, Holder Pad for Quick-Change Discs, 3", TS x 1/4" Shank, Soft Density
Quick Change Abrasive Pads
5758099 5758099 Image Match (12) Sandvik Sandvik 266RKF-D20-4, CoroThread 266 Boring Bar for Thread Turning, 1.250 x 14.0 in
Indexable Boring Bars
67430-C3 67430-C3 Image Match (121) Harvey Tool 0.030" Double-Ended Corner Rounding Carbide Endmill, Flared, 0.008" Pilot Dia., 2 -Flute, AlTiN Coated
Miniature Corner Rounding End Mills
00048011332420 00048011332420 Image Match (101) 3M Scotch-Brite 33242, SF Finishing and Deburring Wheel, 12 x 1 x 5", 8S MED
Finishing & Deburring Wheels
1C50A-0020 1C50A-0020 Image Match (41) Allied Machine Allied Machine 1C50A-0020, T-A Insert, 5/8", Series 0, TiAlN, Carbide C5(P40)
Replaceable Drill Inserts
50051131274452 50051131274452 Flyer
19 products
3M 3M S1407SGAF, Solus 1000, Protective Eyewear, I/O Grey Lens, Pink/Black Frame, Scotchgard Anti-Fog Lens, 20/case
Safety Glasses
325852138.000 325852138.000 Image Match (175) Flyer
199 products
DoALL DoALL 325-852, 138" Welded Tungsten Grit Band Saw Blade, 1-1/4 x 0.042", Coarse Grit, Segmented Edge
Tungsten Grit Band Saw Blades
040044 040044 Image Match (77) Precision Twist Drill 11/16" HSS Screw Machine Length Drill, Bright Finish, 2.5xD, Precision Twist Drill Series R40
Standard Screw Machine Length Drills
00051115354724 00051115354724 Image Match (122) Standard Abrasives Standard Abrasives 863210, Type 632 Unitized Wheel, 2 x 1/4", 1/4" AH, Silicon Carbide, Fine
Unified & Unitized Wheels
4C11H-0025 4C11H-0025 Image Match (178) Allied Machine Allied Machine 4C11H-0025, 25/32" GEN2 T-A Drill Insert, Series 1
Replaceable Drill Inserts
E20-014(C) E20-014(C) Image Match (251) Lyndex-Nikken Lyndex Nikken ER20 Coolant-Thru Collet- Inch, 7/32 Inch
Individual Collets
303900096.500 303900096.500 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-900, 96.5" Welded, Silencer GP Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for General Purpose Sawing
1110100 1110100 Image Match (181) Osg 1/4-20 OSG Straight Flute HSS Hand Tap, Plug, 4-Flute, H2, Bright Finish, List 101
Straight Flute Taps - General Purpose
MDW0860HGS3 MDW0860HGS3 Image Match (198) Sumitomo 8.6mm Carbide Coolant Through Drill, 3XD, PVD DEX Coated, Sumitomo MDW-HGS3 Series
HP Drills - Short Length - Coolant Fed
8670480 8670480 Image Match (439) Flyer
1623 products
Osg 4.80mm A Brand AD Stub Length Carbide Drill, EgiAs Coating, 2xD, OSG Series 6300
HP Drills - Short Length
5743021 5743021 Image Match (8) Sandvik 8.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 2-Flute, (Ti,Al)N2 Coated, 1.00mm Corner Radius
HP Corner Radius End Mills
19T6CQS 19T6CQS Image Match (15) Flyer
908 products
Sumitomo DNMG331ESU-AC5025S Sumitomo, 55° Negative Carbide Turning Insert with Hole, 3/8" IC
Turning Inserts
1010065 1010065 Image Match (80) Union Butterfield 3/8-24 General Purpose HSS Hand Tap, Bottoming, 4-Flute, H3, Union Butterfield 1500 Series
Straight Flute Taps - General Purpose
301879240.000 301879240.000 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-879, 240" Welded Penetrator Bi-Metal Band Saw Blade, 1-1/2x0.050", 2-3 TPI
Premium Blades for High-Production Sawing
1010187 1010187 Image Match (80) Union Butterfield 1-1/8 - 12 General Purpose HSS Hand Tap, Bottoming, 4-Flute, H4, Union Butterfield 1500 Series
Straight Flute Taps - General Purpose
31504308 31504308 Image Match (368) Osg 1-12 EXOTAP VC-10 High Performance Spiral Flute VC-10 STI Tap, 4-Flute, H6, 2.5P-3P Chamfer, V Coating, OSG Series 315
Screw Thread Insert Spiral Flute Taps
5755001 5755001 Image Match (4) Sandvik TPMR 322-53 5015 Sandvik, T-Max S, Cermet Insert for Turning
Turning Inserts
5755507 5755507 Image Match (5) Sandvik VBMT 2(1.5)1-UF 5015 Sandvik, CoroTurn 107, Cermet Insert for Turning
Turning Inserts
6425938 6425938 Image Match (190) Sandvik 870-2665-26-GP 4234, 26.65mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
334409065.500 334409065.500 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-409, 65.5" Welded Metal Master Carbon Steel Band Saw Blade, 1/2x0.025", 10 TPI
Blades For General Purpose Sawing
EE1810TFX14 EE1810TFX14 Image Match (1156) Flyer
2278 products
Lift-All TUFF-EDGE III EE1810TF Polyester Web Sling, 10" x 14', 1-Ply, Flat Eyes
Web Slings
200-3750 200-3750 Image Match (133) Osg 3/8" Jobber Length Straight Flute Carbide Drill, Bright Finish, OSG Series 200
Straight-Flute Drills
459604 459604 Mitsubishi #57 Size, MWS Series, Solid Carbide Internal Coolant Drill, 1XD, ALTiN Coating, Mitsubishi MWS00430SB
HP Drills - Short Length - Coolant Fed
556076 556076 Mitsubishi 13.4mm Mitsubishi Solid Carbide Internal Coolant Drill, 5XD, Grade DP7020, MMS Series
HP Drills - Standard Length - Coolant Fed
TT93406S TT93406S Image Match (11) USA 1/4-18" NPT HSS Taper Pipe Tap, 4-Flute, Steam Oxide Coated, USA Series 777
Taper Pipe Taps
325373098.000 325373098.000 Image Match (175) Flyer
199 products
DoALL DoALL 325-373, 98" Welded Tungsten Grit Band Saw Blade, 1/2 x 0.025", Medium Grit, Segmented Edge
Tungsten Grit Band Saw Blades
6241141 6241141 Image Match (290) Sandvik 9.90mm CoroDrill 460, Solid Carbide Drill, 5XD, TiAlN Coated
HP Drills - Standard Length
10078371621572 10078371621572 3M 3M Fuel 2 Protective Eyewear, 11654-00000-10 Clear Anti-Fog Lens, Gray Frame
Safety Glasses
9002060074000 9002060074000 Image Match (252) Guhring 7.400mm Low Helix Type H Jobber Length HSS Drill, Bright Finish, Guhring Series 206
Slow Spiral Jobber Length Drills
3334060 3334060 Image Match (83) Osg 6.00mm OSG A Brand ADFLS Long Shank Carbide Flat Drill, 2XD, EgiAs Coating, Series 5705
HP Drills - Flat Hole Drills
10549346 10549346 Mitsubishi 8.80mm Solid Carbide Internal Coolant Drill, 10XD, 9mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Extra Long - Coolant Fed
CCMT32.52ELU-AC820P CCMT32.52ELU-AC820P Image Match (24) Sumitomo CCMT 32.52 ELU AC820P Sumitomo, Carbide 80° Positive Turning Insert with Hole, 3/8" IC
Turning Inserts
333026209.000 333026209.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-026, 209" Welded, Silencer Plus Bi-Metal Band Saw Blade, 1/2x0.035", 6 (claw tooth) TPI
Premium Blades for Multi-Purpose Sawing
19T6AFO 19T6AFO Image Match (21) Flyer
908 products
Sumitomo CNMG644EMU-AC5025S Sumitomo, 80° Negative Carbide Turning Insert with Hole, 3/4" IC
Turning Inserts
WMH-2-17 WMH-2-17 Image Match (11) Western Enterprises Western Enterprises WMH-2-17 120 Hose Assembly
Welding Hoses
CD52558 CD52558 Image Match (108) USA 29/32" HSS Taper Length Drill, Black Oxide Finish, USA 525 Series
Standard Taper Length Drills
U11 94200 U11 94200 Image Match (477) Komet KOMET U11 94200, 1.654", KUB Quatron, Cylindrical Shank Indexable Insert Drill, 3xD, 40 x 68mm Shank
Web Visibility Category A
1311602001 1311602001 Image Match (58) Osg M33-3.5 HY-PRO HXL-W Spiral Flute HSSE Tap for Horizontal Applications, D20, 5-Flute, Steam Oxide Coating, OSG Series 13116
Spiral Flute Taps - General Purpose
5745835 5745835 Image Match (30) Sandvik R390-17 04 20E-PM 1010 Sandvik CoroMill 390, Carbide Insert for Milling, TiAlN2 Coating
Indexable Milling Inserts
5730908 5730908 Image Match (9) Sandvik DCMX 2(1.5)1-WF 1125 Sandvik, CoroTurn 107, Carbide Wiper Insert for Turning
Turning Inserts
5853559 5853559 Image Match (39) Sandvik 490R-08T308M-MM S30T Sandvik CoroMill 490, Carbide Insert for Milling, TiAlN2 Coating
Indexable Milling Inserts
7564404 7564404 Image Match (5) Sandvik R390-18 06 12M-PMR 4330 Sandvik, CoroMill 390 Carbide Insert for Milling, CVD Ti(C,N)+Al2O3+TiN Coating
Indexable Milling Inserts
381612180.000 381612180.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-612, 180" Welded Supreme Bi-Metal Band Saw Blade, 2-5/8 x 0.063", 1.5-2 TPI
Ultra-Premium Blades for High Production Sawing
SMDH170D SMDH170D Image Match (114) Sumitomo SMDH170D, Sumitomo SMD Metric Replaceable Tip Drill Body - Coolant Through, 8X Hole Depth
Replaceable Tip Drill Bodies
WMS-1-53 WMS-1-53 Image Match (22) Western Enterprises Western Enterprises WMS-1-53, CGA-540, Outlet Adaptor, Check Valve Outlet to 1/2" NPT, Brass
Welding Hose & Compressed Gas Fittings
8672240 8672240 Image Match (439) Flyer
1623 products
Osg 2.40mm OSG A Brand AD Jobber Length Carbide Drill, EgiAs Coated, 4xD, Series 6310
HP Drills - Standard Length
058840 058840 Image Match (63) Precision Twist Drill #40 Size Heavy Duty Jobber Length Drill - NAS 907 Type D, Cobalt, Bronze Oxide Coated, Precision Twist Drill R89CO Series
Heavy-Duty Split Point Jobber Length Drills
0624821 0624821 Image Match (115) Dormer 1/2" MP-X Short Length High Performance Solid Carbide Drill, TiALN Coating, 3xD, Precision Twist Drill Series R458
HP Drills - Short Length
6612784 6612784 Image Match (36) Sandvik SNMG 434-QM 4315 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
39517 39517 Image Match (208) Sgs 9/64" Square-End Regular Length Carbide End Mill, 1/2" L.O.C., 2-Flute, TiCN Coated, SGS Series 3
Square End Endmills
333103131.000 333103131.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-103, 131" Welded, Silencer Plus Bi-Metal Band Saw Blade, 3/4x0.035", 3 TPI
Premium Blades for Multi-Purpose Sawing
32688 32688 Image Match (7) WIHA Wiha 32688, 90 Degree Bent Tip Internal Retaining Ring Pliers, Tip Size: 0.090 Inch
Web Visibility Category A
5755685 5755685 Image Match (16) Sandvik VBMT 330-MF 1115 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
230412 230412 Image Match (17) Rock River Tool 3/8" Straight Flute Carbide Tipped End Mill, 4-Flute, Rock River Type 2304
Web Visibility Category A
018069 018069 Image Match (80) Precision Twist Drill #69 Size Jobber Length HSS Drill, Black Oxide Coated, Precision Twist Drill Series R18
Standard Jobber Length Drills
B40001-D000-0001 B40001-D000-0001 Image Match (87) Technical Data Sheet
2 products
CIMCOOL CIMCLEAN PRODUCTO SP-735, Water-Based Low-Foaming Liquid Detergent, 55 Gallon
Spray & Immersion Cleaners
EN1810TX11 EN1810TX11 Image Match (454) Flyer
2278 products
Lift-All TUFF-EDGE III EN1810T Polyester Endless Web Sling, 10" x 11', 1-Ply
Web Slings
5737875 5737875 Image Match (7) Sandvik N151.2-800-80-5G 1125 Sandvik, T-Max Q-Cut, Carbide Insert for Grooving, Seat Size - 80
Parting Off, Grooving, Profiling & Turning Inserts
6241309 6241309 Image Match (533) Sandvik 11.60mm CoroDrill 460, Coolant Through Solid Carbide Drill, 3XD, TiAlN Coated
HP Drills - Short Length - Coolant Fed
8705140 8705140 Image Match (859) Osg 11.40mm OSG A Brand ADO Taper Length Coolant-Fed Carbide Drill, EgiAs Coated, 8xD, Series 6520
HP Drills - Standard Length - Coolant Fed
27235 27235 Image Match (453) Harvey Tool 0.9mm Harvey Tool, Corner Radius Carbide End Mill, 0.010" C.R., 4-Flute, 3xD, Uncoated
Miniature Corner Radius End Mills
9055100121000 9055100121000 Image Match (193) Guhring 12.10mm RT 100 U Coolant-Thru High-Performance Carbide Drill, Firex Coated, 3xD, Guhring Series 5510
HP Drills - Short Length - Coolant Fed
358356132.000 358356132.000 Image Match (221) Flyer
16185 products
DoALL DoALL 358-356, 132" Welded, Olympia Carbon Steel Band Saw Blade, 1-1/4x0.035", 1.3C TPI
Blades For Woodworking
5733684 5733684 Image Match (19) Sandvik Sandvik DSBNL 3232P 19, T-Max P Shank Tool for Turning, Left Hand, 32 x 32mm Shank
Turning Tool Holders
4100004111 4100004111 Image Match (48) Osg EXOCARB, 1/2-20 UN High Performance Carbide Thread Mill, 4-Flute, TiALN Coating
Threadmills
334581063.000 334581063.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-581, 63" Welded Metal Master Carbon Steel Band Saw Blade, 3/4x0.032", 10 TPI
Blades For General Purpose Sawing
6035613 6035613 Image Match (188) Sandvik 870-1100-8-PM 4234, 11.00mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
no image available 14153 ATA Tools 1/8" SG-41 Bur, Pointed Tree, Double Cut, Solid Carbide
Rotary Burs
EE2804TTX16 EE2804TTX16 Image Match (871) Lift-All Tuff-Edge EE2804TTX16, Web Sling Eye & Eye - Twisted, 2 Ply 4" x 16'
Web Slings
UP-31050-8 UP-31050-8 Image Match (12) Micro 100 Micro 100 UP-31050-8, Undercut & Provile Groove Carbide Tool, Groove W: 0.050/0.052", Depth: 1/2", 5/16" Shank
Solid Grooving Cutters
1400136300 1400136300 Image Match (2594) Osg 3/8-16 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, H8, Bright Finish, OSG 14001 Series
Thread Forming Taps - General Purpose
30116 30116 Image Match (166) Sgs 1/8" Ball-End Regular Length Carbide End Mill, 4-Flute, 1/2" LOC, Uncoated, SGS, 1B Series
Ball-End Endmills
6162329 6162329 Image Match (79) Sandvik TCMT 221-KM 3210 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
618388 618388 Image Match (4) Mitsubishi DNMG 432LP MC6025 Mitsubishi, Carbide 55° Negative Turning Insert with Hole, 1/2" IC
Turning Inserts
TR96443 TR96443 Image Match (1395) USA USA 26707, 5/16", M42 Cobalt Chucking Reamer, 6-Flute, Series 1933
Chucking Reamers
P204C P204C Image Match (37) Conical 15 Deg. Square-End Tapered Carbide End Mill, 1/8"Dia., 3-Flute, Uncoated, Conical TCX Series
Web Visibility Category A
697186 697186 Mitsubishi 14.70mm Solid Carbide Internal Coolant Drill, 3XD, 16mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Standard Length - Coolant Fed
00076308636388 00076308636388 Image Match (24) Standard Abrasives Standard Abrasives 597318, Quick Change Ceramic Pro 2-Ply Disc, TR, 1-1/2", 120 Grit
Quick Change Discs
5723662 5723662 Image Match (27) Sandvik A880-D0875LX25-04 CoroDrill 880 Indexable Insert Drill, 0.875", 4xD, Cylindrical Shank with Flat
Indexable Drill Bodies
7231340 7231340 Image Match (83) Sandvik CNMG 434-MRR 2220 Sandvik, T-Max P Carbide Insert for Turning
Turning Inserts
9006090101000 9006090101000 Image Match (162) Guhring 10.10mm 3-Flute High Precision Carbide Drill, TiN Coated, 5xD, Guhring Series 609
HP Drills - Standard Length
8595413 8595413 Image Match (1013) Osg 4.13mm EX-SUS-GOLD Stub Length HSSE Drill, TiN Coating, ≤3xD, OSG Series 1100
HP Drills - Short Length
193-111 193-111 Mitutoyo Mitutoyo 193-111, Digit Outside Micrometer, 0-25mm, 0.001mm Graduation, Ratchet Stop
Digit Outside Micrometers
CNC-100-1-2 CNC-100-1-2 Image Match (3) Dorian Tool Dorian Tool CNC-100-1-2, CNC Modular LD 60° Diamond Cutting Knurling Tool, 1" Shank
Knurling Tools
00051115427237 00051115427237 Image Match (29) Standard Abrasives Standard Abrasives 635405, Unmounted Flexible Flap Wheel, 3-1/2 x 1 x 5/8" Arbor Hole, 60 Grit, Aluminum Oxide
Unmounted Flap Wheels
325753132.500 325753132.500 Image Match (175) Flyer
199 products
DoALL DoALL 325-753, 132.5" Welded Tungsten Grit Band Saw Blade, 1 x 0.035", Medium Coarse Grit, Segmented Edge
Tungsten Grit Band Saw Blades
381346194.000 381346194.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-346, 194" Welded Supreme Bi-Metal Band Saw Blade, 1-1/4 x 0.042", 5-8 TPI
Ultra-Premium Blades for High Production Sawing
570521817 570521817 Image Match (83) Osg 7/32" OSG A Brand ADFLS Long Shank Carbide Flat Drill, 2XD, EgiAs Coating, Series 5705
HP Drills - Flat Hole Drills
CD32631 CD32631 Image Match (115) USA #31 Size Heavy-Duty Screw Machine Length Drill - Type J, M42 Cobalt, Straw Finish, 135 Degree, Series 325
Heavy Duty Screw Machine Length Drills
60088 60088 Image Match (118) Holo-Krome Holo-Krome Socket Flat Head Cap Screws, 5/16-18x2
Flat Head Socket Cap Screws
6255450 6255450 Image Match (9) Sandvik 930-C4-HD-20-084 Sandvik, CoroChuck 930 High Precision Hydraulic Chuck - Heavy-Duty Version, 20 mm bore
Hydraulic Chucks
5854642 5854642 Image Match (15) Sandvik 490R-140408M-PM 1030 Sandvik CoroMill 490, Carbide Insert for Milling, TiAlN Coating
Indexable Milling Inserts
6241026 6241026 Image Match (533) Sandvik 13.50mm CoroDrill 460, Coolant Through Solid Carbide Drill, 5XD, TiAlN Coated
HP Drills - Standard Length - Coolant Fed
1645038243 1645038243 Image Match (57) Osg 3/8-24 EXOPRO CC-SUS Spiral Flute Tap, 3-Flute, H3, Plug, Vanadium High Speed Steel, TiN Coated, OSG Series 16450
High Performance Spiral Flute Taps
966040-C4 966040-C4 Image Match (50) Harvey Tool 0.040" Harvey Tool Long Reach Stub Flute Ball End Carbide End Mill, 10xD, 3-Flute, Amorphous Diamond Coated
Miniature Ball-End End Mills
1400113405 1400113405 Image Match (2594) Osg #6-40 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, H6, TiN Coated, OSG 14001 Series
Thread Forming Taps - General Purpose
MDW1750HGS3 MDW1750HGS3 Image Match (198) Sumitomo 17.5mm Carbide Coolant Through Drill, 3XD, PVD DEX Coated, Sumitomo MDW-HGS3 Series
HP Drills - Short Length - Coolant Fed
30201808 30201808 Image Match (495) Osg 3/8-24 EXOTAP VA-3 High Performance Spiral Flute HSSE STI Tap, 3-Flute, H3, 2.5P-3P Chamfer, V Coating, OSG Series 302
Screw Thread Insert Spiral Flute Taps

* all information within this site (including price data) is provided as general guidance, with no guarantee of completeness, accuracy, or timeliness. For detailed specifications please review the product pdf datasheet where available.

Created:
Last modified: