Home New Products

The MRO Data Aggregator

New Products from DGI Supply

IMAGE SPECIFICATION IMAGE MATCHES DATASHEET BRAND DESCRIPTION
10516836 10516836 Mitsubishi 2.90mm Coolant Thru Micro Size Carbide Drill, DP1020 Coating 2XD, Mitsubishi PILOT-MVS Series
Micro Drills - Coolant Fed
328422271.000 328422271.000 Image Match (361) Flyer
16185 products
DoALL DoALL 328-422, 271" Welded, T3P Tungsten Carbide Band Saw Blade, 1-1/2 x 0.050", 2-3 TPI
Carbide Triple Chip Band Saw Blades
CD40224 CD40224 Image Match (127) USA #24 Size Jobber Length HSS Drill, Black Oxide Coated, USA Series 400
Standard Jobber Length Drills
8T110X20 8T110X20 Image Match (70) Lift-All Roughneck Wire Mesh Sling, 8T110X20 8" X 20' TRI/CHO
Wire Mesh Slings
6434025 6434025 Image Match (45) Sandvik DCMT 3(2.5)2-PM 4325 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
5756644 5756644 Image Match (3) Sandvik WNMG 431-QM H13A Sandvik, Carbide T-Max P Negative Turning Insert
Turning Inserts
314195237.000 314195237.000 Image Match (286) Flyer
16185 products
DoALL DoALL 314-195, 237" Welded, Scallop Knife-Edge Band Saw Blade, 1/2x0.025, Single Edge; Single Bevel
Scallop Knife-Edge Band Saw Blades
00051115375378 00051115375378 Image Match (17) Standard Abrasives Standard Abrasives 712689, Cartridge Roll Mandrel CM-16, 3/16 x 1" Pilot x 1/4" Shank
Mandrels and Spindles
5915150 5915150 Image Match (3) Sandvik VNMG333-SM H13A Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
309146216.000 309146216.000 Image Match (1543) Flyer
16185 products
DoALL DoALL 309-146, 216" Welded, Dart Carbon Steel Band Saw Blade, 1/2x0.025", 4C TPI
Blades For Non-Production Sawing
KEN20KX7 KEN20KX7 Image Match (232) Lift-All KeyFlex KEN20KX7, Aramid Endless RoundSling, KEN20K, 7'
Roundslings
6040452 6040452 Image Match (302) Sandvik 11.70mm CoroDrill 860 Long Length Coolant Fed Carbide Drill, 4-5xD, TiAlN Coated
HP Drills - Extra Long - Coolant Fed
6428085 6428085 Image Match (27) Sandvik N331.1A-11 50 08M-KM 3330 Sandvik CoroMill 331, Carbide Insert for Slotting, TiCN + Al2O3 + TiN Coating
Indexable Milling Inserts
5752159 5752159 Image Match (20) Sandvik TCMT 2(1.5)1-UF 3215 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
1023600 1023600 Image Match (555) Osg #6-32 General Purpose HSS Straight Flute Hand Tap, Taper, 3-Flute, H3, Bright Finish, OSG Series 102
Straight Flute Taps - General Purpose
104-151 104-151 Image Match (7) Mitutoyo Mitutoyo 104-151, Outside Micrometer with Interchangeable Anvils, 8-12", Ratchet Stop
Vernier Outside Micrometers
333223123.000 333223123.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-223, 123" Welded, Silencer Plus Bi-Metal Band Saw Blade, 1x0.035", 2-3 TPI
Premium Blades for Multi-Purpose Sawing
00048011163017 00048011163017 Image Match (27) 3M Scotch-Brite 16301, Surface Conditioning Film Back Belt, 3 x 132", Medium Grade, Aluminum Oxide
Surface Conditioning Film Back Belts
040022 040022 Image Match (77) Precision Twist Drill 11/32" HSS Screw Machine Length Drill, Bright Finish, 2.5xD, Precision Twist Drill Series R40
Standard Screw Machine Length Drills
6151000 6151000 Image Match (86) Sandvik 5.10mm CoroDrill 861 Carbide Coolant Through Drill, 12xD, TiAlN Coated
HP Drills - Extra Long - Coolant Fed
16RK138 16RK138 Image Match (11) Sumitomo 3NU-TNGA 332 BN7500 Sumitomo, CBN 60° Negative Turning Insert with Hole, 3/8" IC
Turning Inserts
6040416 6040416 Image Match (302) Sandvik 8.90mm CoroDrill 860 Long Length Coolant Fed Carbide Drill, 4-5xD, TiAlN Coated
HP Drills - Extra Long - Coolant Fed
5741378 5741378 Image Match (64) Sandvik Sandvik RG123L079-16B-075BM, CoroCut 1-2 Shank Tool for Face Grooving, 6" LF
Parting & Grooving Tool Holders
448614 448614 Mitsubishi Mitsubishi RS3510T, Clamp Screw - T10, M3.5 x.014
Fasteners & Hardware
00051115331732 00051115331732 Image Match (153) Standard Abrasives Standard Abrasives 847612, Type FE Surface Conditioning Disc with Arbor Hole, 5", 5/8" Arbor Hole, Medium, Aluminum Oxide
Non-Woven Center Arbor Hole Discs
9002050003300 9002050003300 Image Match (624) Guhring #81 Size General Purpose Jobber Length HSS Drill, Bright Finish, Guhring Series 205
Standard Jobber Length Drills
TR150 TR150 Stanley Stanley TR150, SharpShooter Heavy Duty Staple Gun
Staplers
50048011932267 50048011932267 Image Match (8) 3M Scotch-Brite 93226, Surface Conditioning Low Stretch Belt, 37 x 75", Very Fine Grade, Aluminum Oxide
Surface Conditioning Low Stretch Belt
335422072.625 335422072.625 Image Match (2193) Flyer
16185 products
DoALL DoALL 335-422, 72.625" Welded Metal Master Carbon Steel Band Saw Blade, 3/8x0.025", 6C TPI
Blades For General Purpose Sawing
TC19252 TC19252 Image Match (163) USA #52 Size Jobber Length Split Point Carbide Drill, Uncoated, USA Series 190
Split-Point Jobber Length Drills
521050012 521050012 Image Match (289) Osg 1/2" A Brand ADO-SUS Jobber-Length Coolant-Fed Carbide Drill, 5xD, WXL Coated, OSG Series 5210
HP Drills - Standard Length - Coolant Fed
J205G J205G Image Match (4) Proto Proto J205G, Diagonal Cutting Pliers, 5-1/16" Length
Diagonal Cutting Pliers
333223154.000 333223154.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-223, 154" Welded, Silencer Plus Bi-Metal Band Saw Blade, 1x0.035", 2-3 TPI
Premium Blades for Multi-Purpose Sawing
1105302308 1105302308 Image Match (234) Osg M24-2.0 EXOTAP DC-OIL Coolant-Through Straight Flute VC-10 Tap, 5-Flute, D8, V Coating, OSG Series 11053
High Performance Straight Flute Taps
6732484 6732484 Image Match (20) Sandvik 0.125" CoroMill Plura Solid Carbide Square Shoulder End Mill, 4-Flute, AlCrN Coated
HP Square End Endmills
9055110052000 9055110052000 Image Match (196) Guhring 5.20mm, RT 100 U Coolant-Through Carbide Drill, 5XD, FIREX Coated, Guhring Series 5511
HP Drills - Standard Length - Coolant Fed
412-1250 412-1250 Image Match (18) Osg 1/8" Square End Stub Length Carbide End Mill, 1/4" L.O.C., 2-Flute, Bright Finish, OSG Series 412
Square End Endmills
9002050010000 9002050010000 Image Match (624) Guhring 1.000mm General Purpose Jobber Length HSS Drill, Bright Finish, Guhring Series 205
Standard Jobber Length Drills
EE2812TTX16 EE2812TTX16 Image Match (871) Flyer
2278 products
Lift-All TUFF-EDGE III EE2812TT Polyester Web Sling, 12" x 16', 2-Ply, Twisted Eyes
Web Slings
6239227 6239227 Image Match (189) Sandvik 870-1080-7-KM 3234, 10.80mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
5743415 5743415 Image Match (21) Sandvik 12.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 4-Flute, TiAlN Coated
HP Square End Endmills
11526115 11526115 Image Match (116) Osg 3.10mm NEXUS-GDS Stub-Length Carbide Drill, ≤3xD, WD1 Coating, OSG Series 1150
HP Drills - Short Length
38259 38259 Image Match (168) Sgs 1/2" Corner Radius Carbide End Mill, 0.015" CR, 2-Flute, Uncoated Finish, SGS 3CR Series
Corner Radius Endmills
TT93088 TT93088 Image Match (92) USA M30x3.5 HSS Metric Hand Tap, Taper, 4-Flute, HSS, Uncoated, D9 Limit, USA Series 755
Straight Flute Taps - General Purpose
9085210094000 9085210094000 Image Match (155) Technical Data Sheet
546 products
Guhring 9.40mm RT 100 HF Coolant-Through Carbide Drill, 5xD, nano-Si Coated, Guhring Series 8521
HP Drills - Standard Length - Coolant Fed
942210-C8 942210-C8 Image Match (78) Harvey Tool 0.010" Harvey Tool, Miniature Square End Carbide End Mill, 3X, 3-Flute, TiB2 Coated
Miniature Square-End End Mills
9003050016800 9003050016800 Image Match (422) Guhring 1.68mm General Purpose Jobber Length Cobalt Drill, 5XD, Uncoated, Guhring Series 305
Standard Jobber Length Drills
TC50651 TC50651 Image Match (41) USA 0.060" Corner Radius Carbide Micro Endmill, 0.010" C.R., 4-Flute, Uncoated, USA Series 506
Miniature Corner Radius End Mills
303769096.530 303769096.530 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-769, 96.53" Welded, Silencer GP Bi-Metal Band Saw Blade, 1x0.035", 10-14 TPI
Premium Blades for General Purpose Sawing
5732028 5732028 Image Match (13) Sandvik Sandvik DTJNL 2525M 22, T-Max P Shank Tool for Turning, Left Hand, 25 x 25mm Shank
Turning Tool Holders
9085200055600 9085200055600 Image Match (155) Technical Data Sheet
546 products
Guhring 7/32" RT 100 HF Coolant-Thru High-Performance Carbide Drill, nano-Si Coated, 3xD, Guhring Series 8520
HP Drills - Short Length - Coolant Fed
HP243-3228 HP243-3228 Image Match (345) Osg 8.20mm HY-PRO CARB Stub Length Carbide Drill, TiALN Coating, 3xD, OSG Series HP243
HP Drills - Short Length
21038 21038 Image Match (15) Tapmatic Tapmatic 21038, Steel Tap Collet, Tap Size 5/8
Tap Collets
69014192170 69014192170 Image Match (109) Norton Norton SD120-R100B99-1/4, Type 1A1R Diamond Cut-Off Wheel, 10 x 0.050 x 1-1/4", 120 Grit
Straight Cut-Off Wheels
7231472 7231472 Image Match (5) Sandvik TNMG 433-MR 2220 Sandvik, T-Max P Carbide Insert for Turning
Turning Inserts
CD60835 CD60835 Image Match (115) USA #35 Size Heavy-Duty Jobber Length Drill - Type J, M42 Cobalt, ALTIN, 135 Deg Split Point, Series 608
Heavy-Duty Split Point Jobber Length Drills
5853809 5853809 Image Match (220) Sandvik Sandvik LF123H050-16B-052BM, CoroCut 1-2 Shank Tool for Face Grooving, 6" LF
Parting & Grooving Tool Holders
5748292 5748292 Image Match (324) Sandvik 11.30mm, CoroDrill R840 Delta-C Coolant Through Solid Carbide Drill, 5xD, Cylindrical Shank
HP Drills - Standard Length - Coolant Fed
EE1804TTX21 EE1804TTX21 Image Match (871) Flyer
2278 products
Lift-All TUFF-EDGE III EE1804TT Polyester Web Sling, 4" x 21', 1-Ply, Twisted Eyes
Web Slings
TC79227 TC79227 Image Match (158) USA #27 Size Jobber Length Split Point Carbide Drill, ALTIN Coated, USA Series 191
Split-Point Jobber Length Drills
6425450 6425450 Image Match (40) Widia VSM490D125Z04C075XN10L430 Widia, Victory VSM490-10 Cylindrical Shank 90° Shoulder Mill, 1.250" Cutting Diameter
Indexable Milling Cutter Bodies
040007 040007 Image Match (77) Precision Twist Drill 7/64" HSS Screw Machine Length Drill, Bright Finish, 2.5xD, Precision Twist Drill Series R40
Standard Screw Machine Length Drills
TC11862 TC11862 Image Match (59) USA 2.5mm Square End Regular Length Carbide End Mill, 9.5mm L.O.C., 4-Flute, Uncoated, USA Series 118
Square End Endmills
319375215.000 319375215.000 Image Match (2479) Flyer
16185 products
DoALL DoALL 319-375, 215" Welded Penetrator TiN Coated Bi-Metal Band Saw Blade, 1-1/2x0.050", 4-6 TPI
Premium Blades for High-Production Sawing
85-7500/XL 85-7500/XL Image Match (4) Technical Data Sheet
4 products
Pip PIP 85-7500, Economy Grade Shoulder Split Cowhide Leather Palm Glove with Fabric Back, Rubberized Safety Cuff, X-Large
Leather Gloves
TC10940 TC10940 Image Match (15) USA 5/8" Square End Stub Length Carbide End Mill, 3/4" L.O.C., 4-Flute, ALTiN Coated, USA Series 109
Square End Endmills
5735049 5735049 Image Match (3) Sandvik LNCX 18 06 AZ R-11 SMA Sandvik T-Max 45, Carbide Insert for Milling, Uncoated
Indexable Milling Inserts
5747993 5747993 Image Match (119) Sandvik 18.00mm CoroDrill R840 Delta-C Solid Carbide Drill, (Ti,Al)N Coating, 3xD
HP Drills - Short Length
303415119.000 303415119.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-415, 119" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 6-10 TPI
Premium Blades for General Purpose Sawing
34175 34175 Image Match (3) Proto Proto J7651, Impact Adapter, 1/2 Inch Drive, Size: 3/8 Inch
Adapters & Universal Joints - Impact
6967002 6967002 Image Match (372) Sandvik 5/16-18 UNC CoroTap 300 Spiral Flute HSS-PM Tap, 3-Flute, C-Chamfer, 3BX, Uncoated
High Performance Spiral Flute Taps
6868386 6868386 Image Match (45) Sandvik DPMT 2(1.5)2-KM 3210 Sandvik, CoroTurn 111, Carbide Insert for Turning
Turning Inserts
6239332 6239332 Image Match (189) Sandvik 870-2060-20-KM 3234, 20.60mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
EFG0465-C6 EFG0465-C6 Image Match (71) Harvey Tool #56 Size High Performance Miniature Carbide Drill, 12xD, AlTiN Nano Coated
Micro Drills - Non-Coolant Fed
3318300 3318300 Image Match (110) Osg 3.00mm EXOCARB WH70-DRL Low Helix Jobber Length Carbide Drill, WXS Coating, OSG Series 5171
HP Drills - Standard Length
CD50248 CD50248 Image Match (115) USA #48 Size Heavy-Duty Jobber Length Drill - Type J, M42 Cobalt, Straw, 135 Deg Split Point, Series 500
Heavy-Duty Split Point Jobber Length Drills
TC74417 TC74417 Image Match (65) USA 5/16" Corner Radius Carbide End Mill - Long Length, 0.015" CR, 4-Flute, ALTIN Finish, USA 744 Series
Corner Radius Endmills
382LBX17 382LBX17 Image Match (214) Lift-All Permaloc Wire Rope Sling - Domestic Rope, 382LBX17, 6 x 19, EIP, IWRC, 2 Leg Bridle 3/8" x 17'
Wire Rope Slings
74350 74350 Image Match (194) Harvey Tool 0.050" Harvey Tool Miniature Ball End Carbide End Mill, 4-Flute, 3xD, Uncoated
Miniature Ball-End End Mills
0330-0195 0330-0195 Image Match (4) Victor Victor 0330-0195 4-1-303MP Cutting Tip
Tips & Nozzles
303420099.750 303420099.750 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-420, 99.75" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 10-14 TPI
Premium Blades for General Purpose Sawing
320258118.000 320258118.000 Image Match (1238) Flyer
16185 products
DoALL DoALL 320-258, 118" Welded, Structurall Bi-Metal Band Saw Blade, 1x0.035", 5-8 TPI
Premium Blades for Sawing Structures
5764563 5764563 Image Match (96) Sandvik Sandvik 570-32L123K18B088B, CoroCut 1-2 Head for Face Grooving, 18mm LF
Parting & Grooving Tool Holders
66261009185 66261009185 Norton Bear-Tex Speed-Lok 66261009185, Non-Woven Quick-Change Disc, 3", Type TS/II, Medium, Aluminum Oxide
Non-Woven Quick Change Discs
00051115368431 00051115368431 Image Match (153) Standard Abrasives Standard Abrasives 840189, Quick-Change Surface Conditioning Disc Type GP, 1", TR, Very Fine, Aluminum Oxide
Non-Woven Quick Change Discs
15132-B834 15132-B834 Image Match (24) F&D TOOL F&D TOOL 15132-B834, HSS Screw Slotting Saw, 2-3/4 x 0.045 x 1", 72 Teeth
Slotting Saws
no image available 182-265 Mitutoyo Mitutoyo 182-265, Full-Flexible Steel Rule - Inch/Metric, 24", Satin Chrome
Rules & Straight Edges
4908 4908 Image Match (5) Mcr Safety Red Ram 4900, Unlined Goatskin Leather Welders Gloves, White, Medium
Welding Gloves
1040-1137 1040-1137 Image Match (13) Tweco Tweco M415-116 MIG Gun, 1040-1137
Mig Guns

* all information within this site (including price data) is provided as general guidance, with no guarantee of completeness, accuracy, or timeliness. For detailed specifications please review the product pdf datasheet where available.

Created:
Last modified: