Home New Products

The MRO Data Aggregator

New Products from DGI Supply

IMAGE SPECIFICATION IMAGE MATCHES DATASHEET BRAND DESCRIPTION
11228 11228 Dynabrade Contact Arm Assembly, 5/8" Dia. x 3/8" W, Rubber Wheel, with H.D. Version of 11218 Arm, For 1/2" (13 mm) W x 24" (610 mm) L Belts
Contact Arm Assembly
1645012203 1645012203 Image Match (57) Osg 1/2-20 EXOPRO CC-SUS Spiral Flute Tap, 3-Flute, H3, Plug, Vanadium High Speed Steel, TiN Coated, OSG Series 16450
High Performance Spiral Flute Taps
333346173.000 333346173.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-346, 173" Welded, Silencer Plus Bi-Metal Band Saw Blade, 1-1/4x0.042", 4-6 TPI
Premium Blades for Multi-Purpose Sawing
5750173 5750173 Image Match (16) Sandvik SNMG 543-QM 235 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
V43 31202 V43 31202 Image Match (558) Komet KOMET V43 31202, 0.472", KUB Trigon, Cylindrical Shank Indexable Insert Drill, 2xD, 20 x 50mm Shank
Web Visibility Category A
37121 37121 Image Match (153) Sgs 1" Z-Carb HPR Corner Radius Carbide Roughing End Mill, Ti-Namite-M Coated, 5-Flute, 0.19" CR, SGS Series Z5CR
HP Roughing & Finishing End Mills
00051144887439 00051144887439 3M 3M 88743, Disc Pad Hub, 2-1/2", 5/8-11 INT, For Short Shaft Tool
Hubs
7081128 7081128 Image Match (34) Sandvik RCMX 32 09 00 4335 Sandvik, T-Max P Carbide Insert for Turning
Turning Inserts
8599146 8599146 Image Match (320) Osg 14.60mm VPH GDS Stub Length Powdered Metal Drill, V Coating, ≤3xD, OSG Series 1900
HP Drills - Short Length
303769500.000 303769500.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-769, 500" Welded, Silencer GP Bi-Metal Band Saw Blade, 1x0.035", 10-14 TPI
Premium Blades for General Purpose Sawing
5748444 5748444 Image Match (119) Sandvik 12.40mm CoroDrill R840 Delta-C Solid Carbide Drill, (Ti,Al)N Coating, 3xD
HP Drills - Short Length
9024790035000 9024790035000 Image Match (193) Guhring 3.50mm RT100X High Penetration Coolant-Through Carbide Drill, nano-FIREX Coated, 5xD, Guhring Series 2479
HP Drills - Standard Length - Coolant Fed
5733314 5733314 Image Match (254) Sandvik Sandvik LF123M32-4040B, CoroCut 1-2 Shank Tool for Parting and Grooving, 250mm LF
Parting & Grooving Tool Holders
5743979 5743979 Image Match (6) Sandvik R245-12 T3 M-PM 1010 Sandvik CoroMill 245, Carbide Insert for Milling, TiAlN2 Coating
Indexable Milling Inserts
6660405 6660405 Image Match (10) Sandvik 880-D0810V80-04 CoroDrill 880 Indexable Insert Drill, 81.00mm, 4xD, Cylindrical Shank with Flat
Indexable Drill Bodies
MDW0300HGS3 MDW0300HGS3 Image Match (198) Sumitomo 3.00mm Carbide Coolant Through Drill, 3XD, PVD DEX Coated, Sumitomo MDW-HGS3 Series
HP Drills - Short Length - Coolant Fed
32110 32110 Image Match (65) Holo-Krome Holo-Krome Cup Point Socket Set Screws, #10-24x1-1/2
Fasteners & Hardware
TT90149S TT90149S Image Match (130) USA #6-40 HSS Hand Tap, Plug, 3-Flute, HSS, Steam Oxide Coated, H2 Limit, USA Series 726
Straight Flute Taps - General Purpose
00051115427008 00051115427008 Image Match (112) Standard Abrasives Standard Abrasives A/O Flexible Flap Wheel 621428, 1" x 1" x 1/4-20" 120, 10 per inner 100 per case
Mounted Flap Wheels
9006510106000 9006510106000 Image Match (413) Guhring 10.6mm General Purpose Jobber Length HSS Drill, TiN Coated, Guhring Series 651
Standard Jobber Length Drills
8673000 8673000 Image Match (439) Flyer
1623 products
Osg 10.00mm OSG A Brand AD Jobber Length Carbide Drill, EgiAs Coated, 4xD, Series 6310
HP Drills - Standard Length
U45 33650 U45 33650 Image Match (399) Komet KOMET U45 33650, 1.437", KUB Pentron, Cylindrical Shank Indexable Insert Drill, 5xD, 40 x 68mm Shank
Web Visibility Category A
32900 32900 Ridgid Ridgid 276, Soil Pipe Cutter, 1-1/2 - 6" Capacity
Tubing & Pipe Cutters
310-006075 310-006075 Image Match (29) Monster Tool Company 1/8" SC-42L2 Bur, Cylinder - Radius End, Single Cut, Solid Carbide
Web Visibility Category A
301739286.000 301739286.000 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-739, 286" Welded Penetrator Bi-Metal Band Saw Blade, 1-1/4x0.042", 3-4 TPI
Premium Blades for High-Production Sawing
9002060038500 9002060038500 Image Match (252) Guhring 3.850mm Low Helix Type H Jobber Length HSS Drill, Bright Finish, Guhring Series 206
Slow Spiral Jobber Length Drills
5854747 5854747 Image Match (39) Sandvik 490R-140408M-PL 1020 Sandvik CoroMill 490, Carbide Insert for Milling, TiAlN Coating
Indexable Milling Inserts
5846589 5846589 Image Match (32) Sandvik TLGP-3110R 1125 Sandvik, Top Lok, Carbide Insert for Grooving, Seat Size - 3
Parting Off, Grooving, Profiling & Turning Inserts
8622863 8622863 Image Match (245) Osg 6.30mm, V-Series HELIOS Taper-Length Deep Hole Cobalt Drill, 10XD, WXL Coated, OSG List 1750
HP Drills - Extra Long
TR94449 TR94449 Image Match (1395) USA 0.2845" HSS Chucking Reamer, 6-Flute, 1-1/2" LOC, USA Series 933
Chucking Reamers
00048011032979 00048011032979 Image Match (53) 3M Scotch-Brite Cut and Polish Wheel, 12 in x 2 in x 5 in 7A VFN, 1 per case
Cut & Polish Wheels
381258109.000 381258109.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-258, 109" Welded Supreme Bi-Metal Band Saw Blade, 1 x 0.035", 5-8 TPI
Ultra-Premium Blades for High Production Sawing
042318 042318 Image Match (115) Precision Twist Drill R Size Heavy Duty Screw Machine Length Drill, Cobalt, Bronze Oxide Finish, 135 Degree, Series M42CO
Heavy Duty Screw Machine Length Drills
5733806 5733806 Image Match (59) Sandvik Sandvik LAG151.32-32S-40, T-Max Q-Cut Boring Bar, 32 x 250mm
Indexable Boring Bars
6259586 6259586 Image Match (44) Sandvik 5.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 3-Flute, AlCrN Coated
HP Square End Endmills
E40157 E40157 Image Match (87) Lyndex-Nikken Lyndex Nikken ER40 Collet- Metric, 4.0mm
Individual Collets
5753632 5753632 Image Match (24) Sandvik Sandvik TLSR 83D-S, Top Lok Shank Tool for Parting and Grooving, 6" LF
Parting & Grooving Tool Holders
U10 74100 U10 74100 Image Match (477) Komet KOMET U10 74100, 41.0mm, KUB Quatron, ABS50 Shank Indexable Insert Drill, 2xD
Web Visibility Category A
333223106.000 333223106.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-223, 106" Welded, Silencer Plus Bi-Metal Band Saw Blade, 1x0.035", 2-3 TPI
Premium Blades for Multi-Purpose Sawing
24054 24054 Image Match (80) KEO CUTTERS #4x5, Long Series Combined Drill & Countersink, High Speed Steel
Combined Drill & Countersinks - Long
303600174.000 303600174.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-600, 174" Welded, Silencer GP Bi-Metal Band Saw Blade, 1-1/4x0.042", 8-12 TPI
Premium Blades for General Purpose Sawing
5753425 5753425 Image Match (36) Sandvik TNMA 332-KR 3210 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
51002 51002 Image Match (162) Harvey Tool 0.110" Harvey Tool Miniature Ball End Carbide End Mill, 4-Flute, 1.5xD, Uncoated
Miniature Ball-End End Mills
9041120141000 9041120141000 Image Match (141) Guhring Guhring 9041120141000, 14.10mm, HT 800 WP Interchangeable Drill Insert, Body Size 140
Replaceable Dill Tips & Inserts
TC97024 TC97024 Image Match (14) USA 3/8" Square End Extra Long Carbide End Mill, 1-3/4" L.O.C., 2-Flute, TICN Coated, USA Series 970
Square End Endmills
00051144024063 00051144024063 Image Match (10) 3M 3M 02406, Utility Cloth Sheet 211K, 9 x 11, 180 Grit, J-wt., Aluminum Oxide
Sheets for Dry Applications
63170 63170 Image Match (228) Sgs 5.30mm HI-PERCARB Double Margin Carbide Drill, AlTiN Coating, 3xD, SGS Series 135M
HP Drills - Short Length
500-0004540 500-0004540 Image Match (776) Monster Tool Company Monster Tool Company 500-0004540, 0.4540", Solid Carbide Chucking Reamer, 6-Flute, Series 500
Web Visibility Category A
00051144805112 00051144805112 Image Match (41) 3M 3M 80511, Roloc 777F Quick Change Abrasive Disc, 1-1/2 x Roloc TR, P120 Grit, Ceramic
Quick Change Discs
EN2806NX11 EN2806NX11 Image Match (368) Lift-All Webmaster 1600 Endless Web Sling, , 6" x 11',2 Ply Nylon
Web Slings
7101122 7101122 Image Match (4) Sandvik R590-110504H-PTW 1130 Sandvik CoroMill Century, Carbide Insert for Milling, AlTiCrN Coating
Indexable Milling Inserts
5723692 5723692 Image Match (27) Sandvik A880-D0750P25-04 CoroDrill 880 Indexable Insert Drill, 0.750", 4xD, Cylindrical Shank with Flat
Indexable Drill Bodies
TC28008 TC28008 Image Match (28) USA 5/8" Vi-Pro Extra-Long Length Variable Index Corner Radius Carbide End Mill, ALCRO-Max Coating, 5-Flute, 0.030" C.R., Weldon Shank, USA Series V52XLR
HP Corner Radius End Mills
303539286.000 303539286.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-539, 286" Welded, Silencer GP Bi-Metal Band Saw Blade, 1-1/4x0.042", 5-8 TPI
Premium Blades for General Purpose Sawing
5731476 5731476 Image Match (8) Sandvik Sandvik DVPNL 3232P 16, T-Max P Shank Tool for Turning, Left Hand, 32 x 32mm Shank
Turning Tool Holders
19T6APR 19T6APR Image Match (5) Flyer
908 products
Sumitomo VNMG331ESU-AC5025S Sumitomo, 35° Negative Carbide Turning Insert with Hole, 3/8" IC
Turning Inserts
6612368 6612368 Image Match (31) Sandvik CCMT 3(2.5)1-WM 4315 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
TC16564 TC16564 Image Match (14) USA 1" Long Length Ball-Nose Solid Carbide End Mill, 4-Flute, 2-1/4" LOC, Bright Finish, USA, 165 Series
Ball-End Endmills
2990501 2990501 Image Match (72) Osg M3.5x0.6 HY-PRO Spiral Flute Tap, D4, Modified Bottom, 3-Flute, HSSE, Steam Oxide Coated, OSG Series 299
High Performance Spiral Flute Taps
823445 823445 Image Match (162) Harvey Tool 0.045" Harvey Tool Miniature Ball End Carbide End Mill, 3-Flute, 1.5xD, Uncoated
Miniature Ball-End End Mills
8595105 8595105 Image Match (1013) Osg 1.05mm EX-SUS-GOLD Stub Length HSSE Drill, TiN Coating, ≤3xD, OSG Series 1100
HP Drills - Short Length
6198245 6198245 Image Match (6) Sandvik VNMG 331-PMC 4325 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
U44 82140 U44 82140 Image Match (399) Komet KOMET U44 82140, 0.843", KUB Pentron, Cylindrical Shank Indexable Insert Drill, 4xD, 1.000 x 3.250" Shank
Web Visibility Category A
42148 42148 Image Match (46) Precision Brand Products Precision Brand 42148, 3" x 3" x 0.040" Clear, Plastic Color Coded Slotted Shim, 20/pkg
Slotted Shim
8672590 8672590 Image Match (439) Flyer
1623 products
Osg 5.90mm OSG A Brand AD Jobber Length Carbide Drill, EgiAs Coated, 4xD, Series 6310
HP Drills - Standard Length
325357093.500 325357093.500 Image Match (175) Flyer
199 products
DoALL DoALL 325-357, 93.5" Welded Tungsten Grit Band Saw Blade, 1/2 x 0.025", Medium Coarse Grit, Segmented Edge
Tungsten Grit Band Saw Blades
215-FR 215-FR Image Match (10) Western Enterprises Western Enterprises 215-FR Valve
Welding Cable & Hose Reels
259709 259709 Image Match (4) Mitsubishi CNMG 431MJ RT9010 Mitsubishi, Carbide, 80° Negative Insert with Hole, 1/2" IC
Turning Inserts
53109 53109 Proto Proto J2373, Rectangular Inspection Mirror, 2-1/8 x 3-1/2 Inch
Inspection Mirrors & Pick Up Tools
303182106.000 303182106.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-182, 106" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 5-8 TPI
Premium Blades for General Purpose Sawing
UU1603DX11 UU1603DX11 Image Match (216) Lift-All Webmaster 1200 Web Sling, Type U - Unilink Each End, 3" x 11',1-Ply Polyester
Web Slings
28115 28115 Image Match (10) F&D TOOL F&D TOOL 28115, 2-1/4" Spiral Flute Shell Reamer, #9 Arbor, High Speed Steel
Shell Reamers
159177 159177 Mitsubishi SEET13T3AGEN-JL NX4545, Mitsubishi, Cerment Insert
Indexable Milling Inserts
TR94329 TR94329 Image Match (1395) USA 0.2170" HSS Chucking Reamer, 6-Flute, 1-1/4" LOC, USA Series 933
Chucking Reamers
2885701 2885701 Image Match (137) Osg 1/4-28 HY-PRO SEVEN Class of Fit Spiral Point Tap, Plug, 2B, 3-Flute, Steam Oxide Coating, OSG Series 287
High Performance Spiral Point Taps
5721398 5721398 Image Match (23) Sandvik Sandvik A20S-SCLCR 09, CoroTurn 107 Boring Bar for Turning, 20 x 250mm
Indexable Boring Bars
814629 814629 Image Match (8) Mitsubishi CNMG 643RS MP9015 Mitsubishi, Carbide 80° Negative Turning Insert with Hole, 3/4" IC
Turning Inserts
14746 14746 Image Match (2) Jackson Jackson 14746 ULB-45 Uni-Trik (pair)
Cable Connectors & Lugs
EN1601DX4 EN1601DX4 Image Match (366) Lift-All Webmaster 1200 Endless Web Sling, , 1" x 4',1-Ply Polyester
Web Slings
61096 61096 Image Match (384) Sgs 6.6mm Jobber Length Carbide Drill, Uncoated, SGS Series 101M
Standard Jobber Length Drills
309187151.000 309187151.000 Image Match (1543) Flyer
16185 products
DoALL DoALL 309-187, 151" Welded, Dart Carbon Steel Band Saw Blade, 3/4x0.032", 3C TPI
Blades For Non-Production Sawing
2808808 2808808 Image Match (290) Osg #10-32 Spiral Point Tap, HSSE, TiCN Coated, H2, OSG 2808808, Series 280
High Performance Spiral Point Taps
5965014 5965014 Image Match (20) Widia VSM490KITSD200Z06WP40PM Widia, Victory VSM490-15 Shell Mill Starter Kit, 2.00" Cutting Diameter
Indexable Milling Cutter Bodies
9006170146800 9006170146800 Image Match (223) Guhring 37/64" Taper Length Type Ti Cobalt Drill, 10XD, Bright Finish, Guhring Series 617
HP Drills - Extra Long
00051144888764 00051144888764 Image Match (47) 3M 3M 88876, Stikit 348D PSA Cloth Disc, 20 x PSA, 50 Grit, Aluminum Oxide
PSA Discs
00051115366079 00051115366079 Image Match (165) Standard Abrasives Standard Abrasives 726022, Straight Precision Cartridge Roll , 1/2 x 2-1/2 x 1/4", 100 Grit, Aluminum Oxide
Coated Abrasive Cartridge Rolls
TR96205 TR96205 Image Match (1395) USA 23/32" HSS Chucking Reamer, 8-Flute, 2-1/4" LOC, USA Series 933
Chucking Reamers
CLM-3-TN CLM-3-TN Image Match (33) Carr Lane Carr Lane CLM-3-TN, T-Nut, M12 Thread, 18mm or 11/16 Inch Slot Size
Clamping Nuts
381523180.000 381523180.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-523, 180" Welded Supreme Bi-Metal Band Saw Blade, 2 x 0.063", 2-3 TPI
Ultra-Premium Blades for High Production Sawing
38EEX7 38EEX7 Image Match (289) Lift-All Permaloc Wire Rope Sling - Domestic Rope, 38EEX7, 6 x 19, EIP, IWRC, Eye & Eye 3/8" x 7'
Wire Rope Slings
HK113 HK113 Mcr Safety MCR Safety HK113, HellKat Safety Glasses, Light Blue Duramass Hard Coat Lens
Safety Glasses
14CNL91-51 14CNL91-51 Image Match (3) Dotco Dotco 14CNL91-51, Non-Reversible Pistol Grip Air Drill, 0.9 hp, 5200 RPM, 3/8" Chuck
Pneumatic Drills
1C23T-0113 1C23T-0113 Image Match (31) Allied Machine Allied Machine 1C23T-0113, T-A Insert, 1-13/32", Series 3, TiN, Carbide C2(K20)
Replaceable Drill Inserts
W83 32130.086420 W83 32130.086420 Image Match (11) Komet W83 32130.086420 KOMET W83.13 Inserts, SOEX, 9.52mm IC
Web Visibility Category A
TR96035 TR96035 Image Match (1395) USA #52 Size HSS Chucking Reamer, 4-Flute, 1/2" LOC, USA Series 933
Chucking Reamers
E1012-71 E1012-71 Cooper Cooper E1012-71 Single Pole Cam-Type, F Series
Cable Connectors & Lugs
7080775 7080775 Image Match (79) Sandvik RCMT 3(2.5) 4335 Sandvik, CoroTurn 107 Carbide Insert for Turning
Turning Inserts
00051135923122 00051135923122 3M 3M 92312, Type 27 Depressed Center Wheel, 4-1/2 x 1/4 x 7/8", Grade 24, Aluminum Oxide
Depressed Center Wheels
UU2603DX19 UU2603DX19 Image Match (216) Lift-All Webmaster 1200 Web Sling, Type U - Unilink Each End, 3" x 19',2 Ply Polyester
Web Slings
66253363814 66253363814 Image Match (10) Norton Norton 5SG80-KVS, Toolroom Grinding Wheel - Type 01 Straight, 14 x 1/2 x 5", Ceramic Alumina
Surface Grinding Wheels
8722580 8722580 Image Match (301) Flyer
1623 products
Osg 5.80mm A Brand ADO-TRS High Feed 3-Flute Carbide Drill, EgiAs Coated, OSG Series 6610
HP Drills - Standard Length - Coolant Fed
5725286 5725286 Image Match (52) Sandvik CNMG 432-MR 4235 Sandvik, Carbide T-Max P Negative Turning Insert
Turning Inserts
36244 36244 Image Match (9) WIHA Wiha 36244, Screw Holding TORX Driver, T10 x 3.1 inch
Web Visibility Category A
5723797 5723797 Image Match (27) Sandvik A880-D1125LX31-04 CoroDrill 880 Indexable Insert Drill, 1.125", 4xD, Cylindrical Shank with Flat
Indexable Drill Bodies
EE2801TFX15 EE2801TFX15 Image Match (1156) Lift-All Tuff-Edge EE2801TFX15, Web Sling Eye & Eye - Flat, 2 Ply 1" x 15'
Web Slings
6241225 6241225 Image Match (533) Sandvik 11/64" CoroDrill 460, Coolant Through Solid Carbide Drill, 3XD, TiAlN Coated
HP Drills - Short Length - Coolant Fed
301748190.000 301748190.000 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-748, 190" Welded Penetrator Bi-Metal Band Saw Blade, 1-1/4x0.042", 4-6 TPI
Premium Blades for High-Production Sawing
TC59255 TC59255 Image Match (103) USA 0.055" Ball Nose Regular-Flute Carbide Micro End Mill, 3xD, 4-Flute, ALTIN Coated, USA Series 592
Miniature Ball-End End Mills
19201 19201 Image Match (13) Harvey Tool Harvey Tool 19201, Carbide Double Angle Shank Cutter - Pointed, 90 Degree, 1/8 x 0.062", 4T, Uncoated
Double-Angle Chamfer Milling Cutters
8597304 8597304 Image Match (655) Osg 3.04mm EX-SUS-GOLD Jobber Length HSSE Drill, TiN Coating, OSG Series 1600
HP Drills - Standard Length
5745866 5745866 Image Match (26) Sandvik R390-17 04 40E-PM 1030 Sandvik CoroMill 390, Carbide Insert for Milling, TiAlN Coating
Indexable Milling Inserts
CD55062 CD55062 Image Match (80) USA 31/32" HSS Taper Shank Drill,HSS, Black Oxide Coated, #3 MT, USA 13483 Series 550
Standard Taper Shank Drills
C50-50EM4 C50-50EM4 Image Match (27) Parlec Parlec C50-50EM4, Weldon Style End Holder - 1/2 Inch, CAT 50 x 0.500 Inch
End-Mill Holders
100-057 100-057 Image Match (110) Lyndex-Nikken Lyndex Nikken 100TG Collet- Inch, 57/64 Inch
Individual Collets
602327 602327 Image Match (2) Mitsubishi TNMG 331FH MP3025 Mitsubishi, Cermet 60° Negative Turning Insert with Hole, 3/8" IC
Turning Inserts
10031 10031 Image Match (19) Weiler Weiler 10031, Knot Wire End Brush, 1-1/8" Dia., 0.014" Stainless Steel Fill, 1/4" Stem
Knotted Wire End Brushes
6353757 6353757 Image Match (2) Sandvik TNMG 333-XMR GC15 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
EE3801TTX11 EE3801TTX11 Image Match (871) Flyer
2278 products
Lift-All TUFF-EDGE III EE3801TT Polyester Web Sling, 1" x 11', 3-Ply, Twisted Eyes
Web Slings
6863561 6863561 Image Match (10) Sandvik CNMG 433-XM 2025 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
TT75784 TT75784 Image Match (73) USA M14x2 HSS Metric Hand Tap, Bottom, 4-Flute, HSS, TiN Coated, D7 Limit, USA Series 757
Straight Flute Taps - General Purpose
6765470 6765470 Image Match (212) Sandvik CXS-06G117-6230L 1025 Sandvik, Carbide CoroTurn XS Grooving Insert
Turning Inserts
EN1801TX15 EN1801TX15 Image Match (454) Lift-All Tuff-Edge EN1801TX15, Endless Web Sling , 1-Ply 1" x 15'
Web Slings
TR96160 TR96160 Image Match (1395) USA 10.5mm HSS Chucking Reamer, 6-Flute, 1-3/4" LOC, USA Series 933
Chucking Reamers
CK114 CK114 Mcr Safety MCR Safety CK114, Checkmate Safety Glasses, Universal, Frameless Amber Frame, Anti-Scratch Amber Lens
Safety Glasses
6966740 6966740 Image Match (372) Sandvik MF8x1 MF CoroTap 300 Spiral Flute HSS-PM Tap, 3-Flute, C-Chamfer, 6H, Uncoated
High Performance Spiral Flute Taps
7080816 7080816 Image Match (14) Sandvik WNMG 432-MR 4335 Sandvik, T-Max P Carbide Insert for Turning
Turning Inserts
TC19360 TC19360 Image Match (163) USA 6.0mm Jobber Length Split Point Carbide Drill, Uncoated, USA Series 190
Split-Point Jobber Length Drills
303182198.000 303182198.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-182, 198" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 5-8 TPI
Premium Blades for General Purpose Sawing
5-155-185 5-155-185 Image Match (43) Toolmex Toolmex 5-155-185, 3" Helical Flute Shell Reamer, #10 Arbor, High Speed Steel
Shell Reamers
no image available 36967206 SPI Orange Model B Paintstick
Web Visibility Category A
J4714 J4714 Image Match (39) Proto Proto J4714, 6-Point Standard Length Socket, 1/4" Drive, Size: 7/16", Full Polish Finish
Tools, Instruments, & Hardware
53N87 53N87 Image Match (11) WeldCraft WeldCraft # 12 Alumina Nozzle 3/4
Tig Cups
5908115 5908115 Image Match (2) Sandvik DNGA331T0320B 7525 Sandvik, T-Max P, CBN Insert for Turning
Turning Inserts
309021198.000 309021198.000 Image Match (1543) Flyer
16185 products
DoALL DoALL 309-021, 198" Welded, Dart Carbon Steel Band Saw Blade, 1/4x0.025", 4C TPI
Blades For Non-Production Sawing
310-002081 310-002081 Image Match (22) Monster Tool Company 3/32" SD-41 Bur, Ball Shape, Double Cut, Solid Carbide
Web Visibility Category A
5750158 5750158 Image Match (29) Sandvik SNMG 544-KM 3215 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
351214 351214 Mitsubishi 19.00mm Mitsubishi Solid Carbide Internal Coolant Drill, 5XD, VP15TF Coated, MWS-LB Series
HP Drills - Standard Length - Coolant Fed
631018611 631018611 Image Match (439) Flyer
1623 products
Osg 3/16" OSG A Brand AD Jobber Length Carbide Drill, EgiAs Coated, 4xD, Series 6310
HP Drills - Standard Length
334748236.500 334748236.500 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-748, 236.5" Welded Metal Master Carbon Steel Band Saw Blade, 1x0.035", 10 TPI
Blades For General Purpose Sawing
EN1801DX15 EN1801DX15 Image Match (366) Lift-All Webmaster 1600 Endless Web Sling, , 1" x 15',1-Ply Polyester
Web Slings
0656-0006 0656-0006 Victor Victor 0655-0006 CutSkill FBT-2 Flashback Arrestor - Pair Pack, Oxy/Fuel, 'B' 9/16-18 RH/LH (CGA 022 & 0, Torch Mount
Flash Arrestors
40104 40104 Image Match (10) Te-Co TE-CO 40104, Steel Step Block, 1" Thick, 2-1/2 to 6" Adj
Step Blocks
14776 14776 Image Match (2) Contour Welding Contour 14776 7 Centering Head Jumbo
Centering Heads
335462179.750 335462179.750 Image Match (2193) Flyer
16185 products
DoALL DoALL 335-462, 179.75" Welded Metal Master Carbon Steel Band Saw Blade, 1/2x0.025", 4C TPI
Blades For General Purpose Sawing
no image available 7C213P-.515CI Allied Machine Allied Machine 7C213P-.515CI, GEN3SYS XT Insert, 13.08mm, Series 13, AM300, Carbide C2(K20)
Replaceable Drill Inserts
320623338.000 320623338.000 Image Match (1238) Flyer
16185 products
DoALL DoALL 320-623, 338" Welded, Structurall Bi-Metal Band Saw Blade, 2-5/8x0.063", 2-3 TPI
Premium Blades for Sawing Structures
6868619 6868619 Image Match (37) Sandvik SNMA 642-KR 3210 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
1410103405 1410103405 Image Match (2594) Osg M5-0.8 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, D4, TiN Coated, OSG 14101 Series
Thread Forming Taps - General Purpose
39064 39064 Image Match (166) Sgs 1/2" Ball-End Regular Length Carbide End Mill, 4-Flute, 1" LOC, TICN Coated, SGS, 1B Series
Ball-End Endmills
5734942 5734942 Image Match (36) Sandvik L331.1A-11 50 63H-WL 1030 Sandvik CoroMill 331, Carbide Insert for Slotting, TiAlN Coating
Indexable Milling Inserts
348656 348656 Mitsubishi 2.20mm Mitsubishi Solid Carbide Internal Coolant Drill, 12XD, VP15TF Coated, MWS-XB Series
HP Drills - Extra Long - Coolant Fed
33-B125/M 33-B125/M Image Match (6) Technical Data Sheet
6 products
Pip G-Tek GP 33-B125, Polyurethane Coated Nylon Gloves, Black, Medium
Coated Work Gloves
3300164 3300164 Image Match (401) Osg 1.64mm EXOCARB MAX-MINI WX-MS-GDS High Performance Miniature Carbide Drill, TiALN Coated, OSG Series 5330
Micro Drills - Non-Coolant Fed
08091 08091 Image Match (7) Young Bros Young Bros. 08091, 9-Piece Machine-Made Number Set, 3/8" Character Size
Hand Stamp Sets
TC90510 TC90510 Image Match (39) USA 5/32" Square End Regular Length Carbide End Mill, 9/16" L.O.C., 4-Flute, TICN Coated, USA Series 905
Square End Endmills
EN2803TX7 EN2803TX7 Image Match (454) Lift-All Tuff-Edge EN2803TX7, Endless Web Sling , 2 Ply 3" x 7'
Web Slings
TC57072 TC57072 Image Match (108) USA 0.072" Ball Nose Regular-Flute Carbide Micro End Mill, 3xD, 2-Flute, Uncoated, USA Series 570
Miniature Ball-End End Mills
00605 00605 Image Match (2) LPS Laboratories LPS 00605, Magnum Premium Lubricant with PTFE, 5 Gallon
Lubricants & Penetrants
402-3125-BN11 402-3125-BN11 Image Match (37) Osg 5/16" Regular Length Ball-Nose Carbide End Mill, 2-Flute, 13/16" LOC, TiAlN Coated, OSG, 402BN Series
Ball-End Endmills
48962 48962 Image Match (323) Harvey Tool 1/16", Harvey Tool Long Reach Stub Flute Carbide End Mill, Uncoated, 15xD, 3-Flute
Miniature Square-End End Mills
41450 41450 Image Match (31) Harvey Tool Harvey Tool, 1/4" 60 deg UN Thread Milling Cutter - Single Form, 3/4" Thread Depth, 4-Flute, Uncoated
Threadmills
5731578 5731578 Image Match (7) Sandvik DNG 453T0320 650 Sandvik, T-Max, Ceramic Insert for Turning
Turning Inserts
6868564 6868564 Image Match (33) Sandvik SNMG 434-KR 3225 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
0574188 0574188 Image Match (150) Dormer #73 Size Jobber Length HSS Drill, TiN Coated Tip Coated, Precision Twist Drill Series A012
Standard Jobber Length Drills
EE2808TTX13 EE2808TTX13 Image Match (871) Flyer
2278 products
Lift-All TUFF-EDGE III EE2808TT Polyester Web Sling, 8" x 13', 2-Ply, Twisted Eyes
Web Slings
5748469 5748469 Image Match (324) Sandvik 14.50mm, CoroDrill R840 Delta-C Coolant Through Solid Carbide Drill, 3xD, Cylindrical Shank
HP Drills - Short Length - Coolant Fed
5740920 5740920 Image Match (79) Sandvik RCMT 08 03 M0 3210 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
14EZEEX16 14EZEEX16 Image Match (289) Lift-All E-Z Flex Wire Rope Sling - Imported Rope, 14EZEEX16, Imported, Eye & Eye 1/4" x 16'
Wire Rope Slings
434T-53 434T-53 Image Match (133) Allied Machine Allied Machine 434T-53, 53.00mm GEN2 T-A Drill Insert, Series 4
Replaceable Drill Inserts
357202 357202 Mitsubishi #25 Size, MWS Series, Solid Carbide Internal Coolant Drill, 25XD, ALTiN Coating, Mitsubishi MWS01495X25DB
HP Drills - Extra Long - Coolant Fed
EE2804TWX28 EE2804TWX28 Image Match (167) Flyer
2278 products
Lift-All TUFF-EDGE III EE2804TW Polyester Web Sling, 4" x 28', 2-Ply, Twisted Cordura Wrapped Eyes
Web Slings
6699127 6699127 Image Match (56) Sandvik CNMG 543-WM 4315 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
96809 96809 Markal Markal 96809, Valve Action Liquid Paint Marker, Brown
Paint Markers & Crayons
307670137.000 307670137.000 Image Match (771) Flyer
16185 products
DoALL DoALL 307-670, 137" Welded Penetrator Prime Powder Metal Bi-Metal Band Saw Blade, 1x0.035", 5-8 TPI
Premium Blades for High-Production Sawing
TR96091 TR96091 Image Match (1395) USA 3/16" HSS Chucking Reamer, 6-Flute, 1-1/8" LOC, USA Series 933
Chucking Reamers
320-3X 320-3X Image Match (14) Apex Apex 320-3X, Slotted Power Drive Bit, 0.250 x 0.038" Tip, 1-15/16" L, 1/4" Drive
Power Insert Bits
BB-180750 BB-180750 Image Match (66) Micro 100 Micro 100 BB-180750, Solid Carbide Boring Tool with Radius, 0.180 x 0.750" Bore Dia x Depth
Solid Boring Bars
333223204.000 333223204.000 Image Match (1606) Flyer
16185 products
DoALL DoALL 333-223, 204" Welded, Silencer Plus Bi-Metal Band Saw Blade, 1x0.035", 2-3 TPI
Premium Blades for Multi-Purpose Sawing
41009-C3 41009-C3 Image Match (141) Harvey Tool Harvey Tool 41009-C3, 9/64" Miniature Carbide Spotting Drill - Type II, 140 Deg, AlTiN Coated
Spotting Drills
29-3 29-3 Western Enterprises Western Enterprises CGA 296 Nipple 1/4MPT
Regulator & Flowmeter Parts
5-022-225 5-022-225 Image Match (25) Toolmex 13/16" TMX Cobalt Straight Shank Chucking Reamer, 2-1/2" LOC, 10-Flute, Straight Flute
Chucking Reamers
TR94422 TR94422 Image Match (1395) USA 0.2695" HSS Chucking Reamer, 6-Flute, 1-1/2" LOC, USA Series 933
Chucking Reamers
5724163 5724163 Image Match (15) Sandvik CCMT 3(2.5)1-PM 5015 Sandvik, CoroTurn 107, Cermet Insert for Turning
Turning Inserts
6136052 6136052 Image Match (11) Sandvik CNMG 433-XMR GC30 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
26395 26395 Image Match (453) Harvey Tool 0.095" Harvey Tool, Corner Radius Carbide End Mill, 0.005" C.R., 4-Flute, 3xD, Uncoated
Miniature Corner Radius End Mills
307665178.000 307665178.000 Image Match (771) Flyer
16185 products
DoALL DoALL 307-665, 178" Welded Penetrator Prime Powder Metal Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for High-Production Sawing
8595087 8595087 Image Match (1013) Osg 0.87mm EX-SUS-GOLD Stub Length HSSE Drill, TiN Coating, ≤3xD, OSG Series 1100
HP Drills - Short Length
18137 18137 Image Match (271) Precision Brand Products Precision Brand 18137, 1/8" Diameter W-1, Water Hardening Drill Rod, 36" Length
Drill Rod
196CCGL 196CCGL Image Match (68) Sumitomo WNMG 433 EEG AC6030M Sumitomo, Carbide 80° Negative Turning Insert with Hole, 1/2" IC
Turning Inserts
19230 19230 Image Match (5) ATA Tools 1/2" SG-5G Bur, Pointed Tree, Double Cut, Solid Carbide
Rotary Burs
6241389 6241389 Image Match (290) Sandvik 5.50mm CoroDrill 460 Solid Carbide Drill, TiAlN Coating, 3xD
HP Drills - Short Length
9041060315050 9041060315050 Image Match (493) Guhring 31.50-31.99mm insert range, HT 800 WP 4106 Series Interchangeable Insert Drill, 1.5xD, 31.75mm Whistle Notch Shank - DIN6535-HE
Replaceable Tip Drill Bodies
267038 267038 Image Match (24) Rock River Tool 19/32" Carbide Tipped Hard Steel Die Drill, Bright, Rock River Tool Series 2670
Web Visibility Category A
5750004 5750004 Image Match (33) Sandvik SNMG 434-KR 3210 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
10T5818 10T5818 Image Match (18) Flyer
908 products
Sumitomo CPGT432-AC5015S Sumitomo, 80° Postive Carbide Turning Insert with Hole, 1/2" IC
Turning Inserts
520042212 520042212 Image Match (305) Osg 27/64" A Brand ADO-SUS High Performance Coolant-Fed Carbide Drill, 3XD, WXL Coated, OSG 5200 Series
HP Drills - Short Length - Coolant Fed
74047 74047 Image Match (194) Harvey Tool 3/64" Harvey Tool Miniature Ball End Carbide End Mill, 2-Flute, 3xD, Uncoated
Miniature Ball-End End Mills

* all information within this site (including price data) is provided as general guidance, with no guarantee of completeness, accuracy, or timeliness. For detailed specifications please review the product pdf datasheet where available.

Created:
Last modified: