Home New Products

The MRO Data Aggregator

New Products from DGI Supply

IMAGE SPECIFICATION IMAGE MATCHES DATASHEET BRAND DESCRIPTION
5-101-055 5-101-055 Image Match (29) Toolmex 25mm TMX Straight Flute HSS Taper Pin Reamer, 9-Flute
Taper Pin Reamers
13506 13506 Image Match (3) Dynabrade Dynabrade 13506, Dynastraight Finishing Tool, 1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8" or 1" Dia. Arbor
Pneumatic Finishing Tools
T-82 T-82 Image Match (12) Western Enterprises Western Enterprises T-82, Brass Tee
Welding Hose & Compressed Gas Fittings
TC87236 TC87236 Image Match (554) USA USA 21627, 0.1870", Solid Carbide Reamer, 4-Flute, Series 870
Chucking Reamers
6255553 6255553 Image Match (2) Sandvik 930-V40-P-20-145 Sandvik, CoroChuck 930 High Precision Hydraulic Chuck - Pencil Version, 20 mm bore
Hydraulic Chucks
TC19007 TC19007 Image Match (163) USA 7/64" Jobber Length Split Point Carbide Drill, Uncoated, USA Series 190
Split-Point Jobber Length Drills
994578-C3 994578-C3 Image Match (358) Harvey Tool 5/64" Harvey Tool, Corner Radius Carbide End Mill, 0.010" C.R., 4-Flute, 1.5xD, AlTiN Coated
Miniature Corner Radius End Mills
42809-C3 42809-C3 Image Match (229) Harvey Tool Harvey Tool 42809-C3, 9/64" Stub-Flute Long Reach Corner Radius Carbide End Mill, 0.015" CR, 5xD, AlTiN Coated
Miniature Corner Radius End Mills
5735447 5735447 Image Match (8) Sandvik MAFL 3 010 1025 Sandvik, CoroCut XS Carbide Insert for Turning
Parting Off, Grooving, Profiling & Turning Inserts
73803500 73803500 Image Match (3) Osg OSG 73803500, HY-PRO CARB, Multi-Purpose Centering Drill & Chamfering Holder Body, 90 deg Point, 6-1/2" OAL
Holders
9055100094000 9055100094000 Image Match (193) Guhring 9.40mm RT 100 U Coolant-Thru High-Performance Carbide Drill, Firex Coated, 3xD, Guhring Series 5510
HP Drills - Short Length - Coolant Fed
669505 669505 Mitsubishi 5.50mm Solid Carbide Internal Coolant Drill, 8XD, 6mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Extra Long - Coolant Fed
5750817 5750817 Image Match (33) Sandvik SNMG 644-KR 3215 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
TC19523 TC19523 Image Match (79) USA 23/64" Straight Flute Carbide Drill, Uncoated, USA Series 195
Straight-Flute Drills
5915086 5915086 Image Match (9) Sandvik SNMG432-SM 1105 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
TC53285 TC53285 Image Match (25) USA 0.085" Ball Nose Stub-Flute Carbide Micro End Mill, 1.5xD, 2-Flute, ALTIN Coated, USA Series 532
Miniature Ball-End End Mills
02400 02400 Image Match (2) Hyde Hyde 02400, Black & Silver Stiff Chisel Edge Putty Knife, 3" Width
Putty Knives and Scrapers
180T-.515 180T-.515 Image Match (49) Allied Machine Allied Machine 180T-.515, T-A Insert, 33/64", Series 0, TiN, Premium Cobalt
Replaceable Drill Inserts
6341402 6341402 Image Match (189) Sandvik 870-1130-8-MM 2234, 11.30mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
6762712 6762712 Image Match (533) Sandvik 4.57mm CoroDrill 460, Coolant Through Solid Carbide Drill, 5XD, TiAlN Coated
HP Drills - Standard Length - Coolant Fed
K020TP K020TP Image Match (4) Clamp MFG Kant-Twist 405-4, No-Mar Clamp, 1-3/4 Inch Capacity
Cantilever Clamps
018340 018340 Image Match (80) Precision Twist Drill #40 Size Heavy Duty Jobber Length Drill - NAS 907 Type J, Cobalt, Bronze Oxide Coated, Precision Twist Drill R18CO Series
Heavy-Duty Split Point Jobber Length Drills
5740491 5740491 Image Match (35) Sandvik RCKT 12 04 M0-KM 3220 Sandvik CoroMill 200, Carbide Insert for Milling, TiCN + Al2O3 + TiN Coating
Indexable Milling Inserts
308403242.000 308403242.000 Image Match (1543) Flyer
16185 products
DoALL DoALL 308-403, 242" Welded, Dart Carbon Steel Band Saw Blade, 3/4x0.032", 6 TPI
Blades For Non-Production Sawing
6292974 6292974 Image Match (47) Sandvik CNMG 434-MRR 2035 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
EE2806TFX9 EE2806TFX9 Image Match (1156) Lift-All Tuff-Edge EE2806TFX9, Web Sling Eye & Eye - Flat, 2 Ply 6" x 9'
Web Slings
0143901 0143901 Image Match (31) Osg #8-32 EXOTAP VA-3 Spiral Point Tap, 3-Flute, H3, Bottom, 6" OAL, High Speed Steel, Steam Oxide Coated, OSG Series 398
High Performance Spiral Point Taps
334581166.000 334581166.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-581, 166" Welded Metal Master Carbon Steel Band Saw Blade, 3/4x0.032", 10 TPI
Blades For General Purpose Sawing
303539151.750 303539151.750 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-539, 151.75" Welded, Silencer GP Bi-Metal Band Saw Blade, 1-1/4x0.042", 5-8 TPI
Premium Blades for General Purpose Sawing
853 853 Image Match (555) Osg M12x1.75 General Purpose JIS Straight Flute HSS Tap, Bottom, JIS 2, 4-Flute, Bright Finish, OSG Series 121
Straight Flute Taps - General Purpose
307759197.000 307759197.000 Image Match (771) Flyer
16185 products
DoALL DoALL 307-759, 197" Welded Penetrator Prime Powder Metal Bi-Metal Band Saw Blade, 1-1/4x0.042", 4-6 TPI
Premium Blades for High-Production Sawing
5755069 5755069 Image Match (9) Sandvik TPKN 22 04 PD R HM Sandvik T-Max , Carbide Insert for Milling, Uncoated
Indexable Milling Inserts
03118 03118 Image Match (315) M.A. Ford M.A. FORD 03118, 0.0955", TrueSize Carbide Reamer, 4-Flute, Series 272
Chucking Reamers
TC96533 TC96533 Image Match (14) USA 1/2" Long Length Ball-Nose Solid Carbide End Mill, 4-Flute, 2" LOC, TICN Coated, USA, 965 Series
Ball-End Endmills
V43 71372 V43 71372 Image Match (558) Komet KOMET V43 71372, 0.539", KUB Trigon, Cylindrical Shank Indexable Insert Drill, 3xD, 20 x 50mm Shank
Web Visibility Category A
241018 241018 Image Match (61) Rock River Tool Rock River Tool 241018, 9/16", Carbide Tipped Chucking Reamer, 6-Flute, Series 2410
Web Visibility Category A
5737030 5737030 Image Match (26) Sandvik N151.3-800-60-4G 1145 Sandvik, T-Max Q-Cut, Carbide Insert for Grooving, Seat Size - 60
Parting Off, Grooving, Profiling & Turning Inserts
151A-0030-NP 151A-0030-NP Image Match (3) Allied Machine Allied Machine 151A-0030-NP, T-A Insert, 15/16", Series 1, TiAlN, Super Cobalt
Replaceable Drill Inserts
04010-11MM 04010-11MM Image Match (19) Techniks Techniks 04010-11, TG100 Precision Collet - Metric, 11mm
Individual Collets
45517 45517 Image Match (16) Te-Co TE-CO 45517, T-Slot Bolt, Thread Size: 5/8-11 x 12 Inch
T-Slot Bolts
9007240050000 9007240050000 Image Match (12) Guhring 5mm Carbide NC Spotting Drill, 120 Degree, 62mm OAL, Guhring 724 Series
Spotting Drills
14033 14033 Image Match (360) Harvey Tool 0.033" Harvey Tool, Miniature Square End Carbide End Mill, Uncoated, 1.5XD, 4-Flute
Miniature Square-End End Mills
6158111 6158111 Image Match (1013) Osg 8.10mm EX-SUS-GOLD Stub Length HSSE Drill, TiAIN Coating, ≤3xD, OSG Series 1100
HP Drills - Short Length
303014144.000 303014144.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-014, 144" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/8x0.035", 10-14 TPI
Premium Blades for General Purpose Sawing
303011128.000 303011128.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-011, 128" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/8x0.035", 6 TPI
Premium Blades for General Purpose Sawing
5744210 5744210 Image Match (23) Sandvik R290.90-12T320M-KH 3220 Sandvik CoroMill 290, Carbide Insert for Milling, TiCN + Al2O3 + TiN Coating
Indexable Milling Inserts
TR96005 TR96005 Image Match (1395) USA #77 Size HSS Chucking Reamer, 2-Flute, 3/8" LOC, USA Series 933
Chucking Reamers
9030770047600 9030770047600 Image Match (7) Guhring 3/16" RF 100F Corner Radius Variable Helix Carbide End Mill, 0.004" CR, Bright Finish, Guhring Series 3077
HP Corner Radius End Mills
334409049.000 334409049.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-409, 49" Welded Metal Master Carbon Steel Band Saw Blade, 1/2x0.025", 10 TPI
Blades For General Purpose Sawing
1400150500 1400150500 Image Match (2594) Osg 5/8-11 HY-PRO NRT HSS-CO Thread Forming Tap, 2.5P Chamfer, H10, Bright Finish, OSG 14001 Series
Thread Forming Taps - General Purpose
6035648 6035648 Image Match (188) Sandvik 870-1280-11-PM 4234, 12.80mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
73565000 73565000 Image Match (13) Simonds Simonds 73565000, Taper Saw File, 7", Double Cut
American Pattern Files
10541708 10541708 Mitsubishi 10.00mm Solid Carbide Internal Coolant Drill, 15XD, 10mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Extra Long - Coolant Fed
381346156.000 381346156.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-346, 156" Welded Supreme Bi-Metal Band Saw Blade, 1-1/4 x 0.042", 5-8 TPI
Ultra-Premium Blades for High Production Sawing
9-0610-21 9-0610-21 Image Match (109) Dayton Lamina Danly IEM DieMax XL 9-0610-21, Medium Load Die Springs, 3/8 x 2-1/2", Blue
Die Springs
5740538 5740538 Image Match (7) Sandvik RCKT 20 06 M0-PH 1030 Sandvik CoroMill 200, Carbide Insert for Milling, TiAlN Coating
Indexable Milling Inserts
37264 37264 Image Match (215) Precision Brand Products Precision Brand 37264, 7/16-14 National Coarse Threaded Rod, Electro Zinc Plated, 36" Length
Hardware - Threaded Rod
563041211 563041211 Image Match (268) Technical Data Sheet
437 products
Osg 10.7mm EXOPRO Mega Muscle Taper Length Coolant-Thru Carbide Drill, 3-Flute, WD1 Coated, 10XD, OSG Series 5630
HP Drills - Extra Long - Coolant Fed
7079870 7079870 Image Match (37) Sandvik Sandvik PS-V40C-75-002 Retention Stud, 5/8-11 UNC Thread
Retention Knobs
319635132.000 319635132.000 Image Match (838) Flyer
16185 products
DoALL DoALL 319-635, 132" Welded Supreme TiN Coated Bi-Metal Band Saw Blade, 1 x 0.035", 4-6 TPI
Ultra-Premium Blades for High Production Sawing
31650 31650 Image Match (121) Harvey Tool 0.050" Double-Ended Corner Rounding Carbide Endmill, Flared, 0.046" Pilot Dia., 2 -Flute, Uncoated
Miniature Corner Rounding End Mills
051051 051051 Image Match (192) Precision Twist Drill 51/64" HSS Taper Length Drill, Steam Oxide Finish, Precision Twist Drill R51 Series
Standard Taper Length Drills
TC74655 TC74655 Image Match (79) USA 3/4" Corner Radius Carbide End Mill - Extra-Long Length, 0.045" CR, 4-Flute, ALTIN Finish, USA 746 Series
Corner Radius Endmills
OP-05T308-PHR OP-05T308-PHR Image Match (15) Allied Machine OP-05T308-PHR Revolution and Opening Drill Insert, AM300, Grade C5 (P35)
Indexable Drill Inserts
9024790150800 9024790150800 Image Match (193) Guhring 19/32" RT100X High Penetration Coolant-Through Carbide Drill, nano-FIREX Coated, 5xD, Guhring Series 2479
HP Drills - Standard Length - Coolant Fed
53964 53964 Image Match (249) Starrett Starrett 53964, 1/16 x 4" AISI 01 Oil Hardening Flat Stock, 18" Length
Flat Stock
6255722 6255722 Image Match (10) Sandvik 16.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 6-Flute, (Ti,Al)N2 Coated
HP Square End Endmills
907493-C6 907493-C6 Image Match (72) Harvey Tool 3/32" Harvey Tool, Miniature Square End Carbide End Mill, 5-Flute, 1.5xD, AlTiN Nano Coated
Miniature Square-End End Mills
1500101400 1500101400 Image Match (73) Osg #10-32 UNF Fractional Thread Limit Gage with Short Form Certificate, Class GO/NO-GO, 2B
Thread Plug Gages
5726422 5726422 Image Match (179) Sandvik CXS-04T098-05-1709R 1025 Sandvik, Carbide CoroTurn XS Turning Insert
Turning Inserts
179400 179400 Image Match (166) Mitsubishi 13.0mm, MZS-LB Series, Solid Carbide Internal Coolant Drill, 5XD, ALTiN Coating, Mitsubishi MZS1300LB
HP Drills - Standard Length - Coolant Fed
6241292 6241292 Image Match (533) Sandvik 25/64" CoroDrill 460, Coolant Through Solid Carbide Drill, 3XD, TiAlN Coated
HP Drills - Short Length - Coolant Fed
351071 351071 Mitsubishi 15.10mm Mitsubishi Solid Carbide Internal Coolant Drill, 5XD, VP15TF Coated, MWS-LB Series
HP Drills - Standard Length - Coolant Fed
9006100091300 9006100091300 Image Match (208) Guhring 23/64" Stub Length Type Ti Cobalt Drill, Bright Finish, 3xD, Guhring Series 610
HP Drills - Short Length
00021200393921 00021200393921 Image Match (6) 3M 3M VHB Tape 4950 White, 1-1/2 in x 36 yd 45.0 mil
Foam Tape
00048011053042 00048011053042 Image Match (65) 3M Scotch-Brite 05304, High Strength Disc, 8", 3/4" Arbor Hole, Very Fine, Aluminum Oxide
Non-Woven Center Arbor Hole Discs
307665106.000 307665106.000 Image Match (771) Flyer
16185 products
DoALL DoALL 307-665, 106" Welded Penetrator Prime Powder Metal Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for High-Production Sawing
500-0004250 500-0004250 Image Match (776) Monster Tool Company Monster Tool Company 500-0004250, 0.4250", Solid Carbide Chucking Reamer, 6-Flute, Series 500
Web Visibility Category A
08118 08118 Image Match (76) Holo-Krome Holo-Krome Socket Shoulder Screw, 5/8 x 3-1/2, 1/2-13, Heat Treated Alloy Steel
Shoulder Screws
1703701 1703701 Image Match (368) Osg 1/4-28 EXOTAP VC-10 Spiral Flute VC-10 Tap, Modified Bottom, 3-Flute, H5, Steam Oxide, OSG Series 313
High Performance Spiral Flute Taps
301615166.500 301615166.500 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-615, 166.5" Welded Penetrator Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for High-Production Sawing
CD60303 CD60303 Image Match (115) USA #3 Size Heavy-Duty Screw Machine Length Drill - Type J, M42 Cobalt, ALTIN Finish, 135 Degree, Series 602
Heavy Duty Screw Machine Length Drills
37056 37056 Image Match (15) Proto Proto J10028M, 6-Point Impact Socket - Metric, 1 Inch Drive, Size: 28mm
Sockets - Impact
52030 52030 Starrett Starrett ST436EXRLZ, 12-Piece Outside Micrometer Set, 0-12", 0.0001" Graduation, Ratchet Thimble
Outside Micrometer Sets
TT91025 TT91025 Image Match (99) USA #6-32 HSS Spiral Point Plug Tap, H7, 2-Flute, Uncoated, USA 750 Series
Spiral Point Taps - General Purpose
CNMG432ESU-AC510U CNMG432ESU-AC510U Image Match (3) Sumitomo CNMG 432 ESU AC510U Sumitomo, Carbide 80° Negative Turning Insert with Hole, 1/2" IC
Turning Inserts
42005 42005 Image Match (2) Te-Co TE-CO 42005, Swivel Flange Nuts, Thread Size: 5/8-11
Clamping Nuts
422-0312-BN 422-0312-BN Image Match (16) Osg 1/32" Double-End Ball-End Stub-Length Carbide End Mill, 2-Flute, Bright Finish, OSG Series 422BN
Double-End Ball-End End Mills
5765262 5765262 Image Match (18) Sandvik 880-D1270C4-03 CoroDrill 880 Indexable Insert Drill, 12.70mm, 3xD, Coromant Capto C4-03
Indexable Drill Bodies
1400144105 1400144105 Image Match (2594) Osg 1/2-13 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, H9, TiN Coated, OSG 14001 Series
Thread Forming Taps - General Purpose
3334458 3334458 Image Match (157) Flyer
1623 products
Osg 19.50mm OSG A Brand ADFLO Stub-Length Coolant-Through Carbide Flat Drill, 3xD, EgiAs Coating, Series 5720
HP Drills - Flat Hole Drills
22000S-075F 22000S-075F Image Match (114) Allied Machine Allied Machine 22000S-075F, T-A, Series 0 Flanged Shank Straight Flute Holder, Short Length
Replaceable Tip Drills
303400130.000 303400130.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-400, 130" Welded, Silencer GP Bi-Metal Band Saw Blade, 1x0.035", 8-12 TPI
Premium Blades for General Purpose Sawing
E40-054 E40-054 Image Match (87) Lyndex-Nikken Lyndex Nikken ER16 Collet- Inch, 27/32 Inch
Individual Collets
5747254 5747254 Image Match (104) Sandvik 8.20mm, CoroDrill R840 Delta-C Coolant Through Solid Carbide Drill, 7xD, Cylindrical Shank
HP Drills - Standard Length - Coolant Fed
EE3801TTX15 EE3801TTX15 Image Match (871) Flyer
2278 products
Lift-All TUFF-EDGE III EE3801TT Polyester Web Sling, 1" x 15', 3-Ply, Twisted Eyes
Web Slings
00051115338120 00051115338120 Image Match (165) Standard Abrasives Standard Abrasives 707434, Straight Cartridge Roll , 1/4 x 1 x 1/8", 320 Grit, Aluminum Oxide
Coated Abrasive Cartridge Rolls
445-1575 445-1575 Image Match (38) Osg 4.0mm Square End Carbide End Mill, 14mm LOC, 3-Flute, Bright Finish, OSG Series 445
Square End Endmills
TC53754 TC53754 Image Match (84) USA 0.045" Ball Nose Long Length Long-Flute Carbide Micro End Mill, 5xD, 3-Flute, Uncoated, USA Series 567
Miniature Ball-End End Mills
34308-C3 34308-C3 Image Match (58) Harvey Tool 1/8" Harvey Tool Long Reach Stub Flute Ball End Carbide End Mill, 8xD, 3-Flute, AlTiN Coated
Miniature Ball-End End Mills
5749927 5749927 Image Match (31) Sandvik SNMG 643-HM 4205 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
5724905 5724905 Image Match (29) Sandvik CNMG 433-23 1105 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
327334214.500 327334214.500 Image Match (361) Flyer
16185 products
DoALL DoALL 327-334, 214.5" Welded, T3 Wave Length Tungsten Carbide Band Saw Blade, 1-1/4 x 0.042", 3-4 TPI
Carbide Triple Chip Band Saw Blades
6241315 6241315 Image Match (533) Sandvik 12.20mm CoroDrill 460, Coolant Through Solid Carbide Drill, 3XD, TiAlN Coated
HP Drills - Short Length - Coolant Fed
EE4806TFX16 EE4806TFX16 Image Match (1156) Flyer
2278 products
Lift-All TUFF-EDGE III EE4806TF Polyester Web Sling, 6" x 16', 4-Ply, Flat Eyes
Web Slings
TC16612 TC16612 Image Match (14) USA 3/16" Long Length Ball-Nose Solid Carbide End Mill, 4-Flute, 3/4" LOC, ALTIN Coated, USA, 166 Series
Ball-End Endmills
TC50834 TC50834 Image Match (41) USA 0.047" Corner Radius Carbide Micro Endmill, 0.010" C.R., 4-Flute, ALTIN Coated, USA Series 508
Miniature Corner Radius End Mills
9085210043700 9085210043700 Image Match (155) Technical Data Sheet
546 products
Guhring 11/64" RT 100 HF Coolant-Through Carbide Drill, 5xD, nano-Si Coated, Guhring Series 8521
HP Drills - Standard Length - Coolant Fed
5963314 5963314 Image Match (13) Sandvik 6.00mm CoroMill Plura Solid Carbide Ball Nose Micro End Mill, 2-Flute, AlCrN Coated, 3.00mm Corner Radius
Miniature Ball-End End Mills
33110 33110 Image Match (7) Ridgid Ridgid F-3S, Heavy-Duty Pipe Cutter Replacement Wheel
Tubing & Pipe Cutting Wheels
6966716 6966716 Image Match (249) Sandvik M14x2 M CoroTap 300 Spiral Flute HSS-PM Tap, 3-Flute, C-Chamfer, 6H, Uncoated
High Performance Spiral Flute Taps
8593097 8593097 Image Match (117) Osg 9.70mm Jobber Length Parabolic Drill, TiCN Coated, OSG Series 2000
HP Drills - Standard Length
67638 67638 Image Match (554) Sgs 6.80mm HI-PERCARB Triple Margin Carbide Drill, Ti-NAMITE-B Coating, 3xD, SGS Series 131N
HP Drills - Short Length
670952 670952 Image Match (12) Mitsubishi JOMT-06T215ZZSR-JM MP6120 Mitsubishi, Carbide Insert
Indexable Milling Inserts
200-1910 200-1910 Image Match (133) Osg #11 Size Jobber Length Straight Flute Carbide Drill, Bright Finish, OSG Series 200
Straight-Flute Drills
TC26688 TC26688 Image Match (71) USA 1" Vi-Pro Variable Index Corner Radius Carbide End Mill, ALCRO-Max Coating, 5-Flute, Weldon Shank, 0.120" C.R., USA Series V52RR
HP Corner Radius End Mills
60312H-075F 60312H-075F Image Match (81) Allied Machine Allied Machine 60312H-075F, GEN3SYS, Series 12 Flanged Shank Helical Flute Holder, 3xD Length
Replaceable Tip Drills
29110 29110 Shaviv Shaviv B25C, Solid Carbide Thin Nose Blade
Deburring Blades
30-L2-202 30-L2-202 Image Match (8) Link Industries Unidapt 30-L2-202, Type R Centerdrill Insert, 7/16 x 3/16 inch
Taper Shank CenterDrill Inserts
36100611 36100611 Image Match (9) Osg 1/4" Regular Length Ball-End Carbide End Mill, WXL Coated, 2-Flute, OSG 36100611, Series 3610
HP Ball-End End Mills
5745504 5745504 Image Match (49) Sandvik R390-032C5-11L Sandvik, CoroMill 390 Square Shoulder Milling Cutter, 32mm Cutting Diameter
Indexable Milling Cutter Bodies
5737625 5737625 Image Match (16) Sandvik N151.2-515-50-5G 4225 Sandvik, T-Max Q-Cut, Carbide Insert for Grooving, Seat Size - 50
Parting Off, Grooving, Profiling & Turning Inserts
7045788 7045788 Image Match (35) Sandvik 0.125" CoroMill Plura Solid Carbide Square Shoulder End Mill, 4-Flute, (Ti,Al)N2 Coated
HP Square End Endmills
CP-320 CP-320 Image Match (19) Western Enterprises Western Enterprises CP-320 Chain & Plug
Welding Cable & Hose Reels
1650502008 1650502008 Image Match (268) Osg 5/16-18 UNC A Brand A-SFT Variable Helix HSSE Spiral Flute Tap, H5, 3-Flute, Modified Bottom (2.5P) OSG Series 16505
High Performance Spiral Flute Taps
058334 058334 Image Match (76) Precision Twist Drill 17/32" Screw Machine Length HSS Parabolic Flute Drill, Bright Finish, 3XD, Precision Twist Drill QC41P Series
Screw Machine Length Parabolic Flute Drills
6762650 6762650 Image Match (54) Sandvik 6.6mm, CoroDrill 460 Coolant Thru Carbide Step & Chamfer Drill, 3XD, PVD (Ti,Al)N Coating
HP Drills - Step and Chamfer
TE63519 TE63519 Image Match (14) USA 7/16" Coarse Pitch Roughing Cobalt End Mill, Non-Center Cutting, 4-Flute, ALTIN Coated, USA Series 826
Roughing Endmills
63777 63777 Image Match (228) Sgs 9.60mm HI-PERCARB Double Margin Carbide Drill, AlTiN Coating, 3xD, SGS Series 135M
HP Drills - Short Length
EE3803TTX9 EE3803TTX9 Image Match (871) Flyer
2278 products
Lift-All TUFF-EDGE III EE3803TT Polyester Web Sling, 3" x 9', 3-Ply, Twisted Eyes
Web Slings
6532438 6532438 Image Match (2) Sandvik LNUX 30 19 40-PR 4325 Sandvik, T-Max P, Carbide Insert for Railway Wheel Re-Turning
Turning Inserts
66606 66606 Image Match (71) Weldon 1-1/4" Crest-Kut Cobalt End Mill, Center-Cutting, 6-Flute, 2" LOC, 4-1/2" OAL, Bright Finish, Weldon Shank
Web Visibility Category A
9002050041000 9002050041000 Image Match (624) Guhring 4.100mm General Purpose Jobber Length HSS Drill, Steam Oxide Coated, Guhring Series 205
Standard Jobber Length Drills
07660788280 07660788280 Norton Gemini Alundum, Type 01 Bench and Pedestal Wheel, 8 x 1 x 1", 100/120 Grit, Aluminum Oxide
Bench & Pedestal Wheels
2006500 2006500 Image Match (374) Osg #10-24 HSS Spiral Point Plug Tap, H4, 2-Flute, Bright Finish, OSG 105 Series
Spiral Point Taps - General Purpose
15171905 15171905 Image Match (106) Osg 11/64", 1500 Series, EX-GOLD Cobalt-HSS Jobber Length Drill
Heavy-Duty Split Point Jobber Length Drills
6433958 6433958 Image Match (37) Sandvik CPMT 2(1.5)1-PF 4325 Sandvik, CoroTurn 111, Carbide Insert for Turning
Turning Inserts
7079826 7079826 Image Match (37) Sandvik Sandvik PS-I50C-75-002 Retention Stud, M24 Thread
Retention Knobs
5754108 5754108 Image Match (26) Sandvik TNMG 333-KR 3210 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
5745617 5745617 Image Match (108) Sandvik R390-11 T3 31E-PM 1025 Sandvik CoroMill 390, Carbide Insert for Milling, TiCN + TiN Coating
Indexable Milling Inserts
7357830 7357830 Image Match (190) Sandvik 870-1650-16-PM 4334, 16.50mm Sandvik CoroDrill 870 Drill Tip
Replaceable Dill Tips & Inserts
EE2806TWX13 EE2806TWX13 Image Match (167) Flyer
2278 products
Lift-All TUFF-EDGE III EE2806TW Polyester Web Sling, 6" x 13', 2-Ply, Twisted Cordura Wrapped Eyes
Web Slings
301615138.250 301615138.250 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-615, 138.25" Welded Penetrator Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for High-Production Sawing
6040028 6040028 Image Match (175) Sandvik 8.80mm CoroDrill 860 Stub Length Carbide Drill, TiAlN Coating, 2-3xD860.1.A0
HP Drills - Short Length
303011097.000 303011097.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-011, 97" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/8x0.035", 6 TPI
Premium Blades for General Purpose Sawing
9085210074000 9085210074000 Image Match (155) Technical Data Sheet
546 products
Guhring 7.40mm RT 100 HF Coolant-Through Carbide Drill, 5xD, nano-Si Coated, Guhring Series 8521
HP Drills - Standard Length - Coolant Fed
059733 059733 Image Match (84) Precision Twist Drill 33/64", General Purpose Extra-Length HSS Drill, 18", Bright Finish, Precision Twist Drill Series 1813
Extra Length Twist Drills
10078371620872 10078371620872 3M 3M 12261-00000-20, Privo Protective Eyewear, Clear Anti-Fog Lens, Black Frame
Safety Glasses
EN2806DX20 EN2806DX20 Image Match (366) Lift-All Webmaster 1600 Endless Web Sling, , 6" x 20',2 Ply Polyester
Web Slings
HP253-4528 HP253-4528 Image Match (315) Osg 11.50mm HY-PRO CARB Stub-Length Coolant-Through Carbide Drill, TiALN Coated, OSG HP253-4528, Series HP253
HP Drills - Short Length - Coolant Fed
5743327 5743327 Image Match (18) Sandvik 5.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 3-Flute, TiAlN Coated
HP Square End Endmills
6868509 6868509 Image Match (20) Sandvik DNMG 443-KF 3210 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
0625842 0625842 Image Match (113) Dormer 6.30mm Standard Length High Performance Solid Carbide Drill, TiALN Coated, Precision Twist Drill Series R454
HP Drills - Standard Length
26316 26316 Image Match (11) WIHA Wiha 26316, Hex Inch Screwdriver with Precision Handle, Tip Size: 1/16 Inch, Blade Length: 50mm
Web Visibility Category A
UU1802TX10 UU1802TX10 Image Match (108) Lift-All Tuff-Edge UU1802TX10, Web Sling Type U - Unilink Each End, 1-Ply 2" x 10'
Web Slings
TT91035 TT91035 Image Match (99) USA #10-24 HSS Spiral Point Plug Tap, H2, 2-Flute, Uncoated, USA 750 Series
Spiral Point Taps - General Purpose
UU1802TX13 UU1802TX13 Image Match (108) Lift-All Tuff-Edge UU1802TX13, Web Sling Type U - Unilink Each End, 1-Ply 2" x 13'
Web Slings
5736507 5736507 Image Match (9) Sandvik N123K2-0600-0008-TM H13A Sandvik, CoroCut 1-2, Carbide Insert for Turning, Seat Size - K
Parting Off, Grooving, Profiling & Turning Inserts
301185306.000 301185306.000 Image Match (2479) Flyer
16185 products
DoALL DoALL 301-185, 306" Welded Penetrator Bi-Metal Band Saw Blade, 2-5/8x0.063", 1-1.5 TPI
Premium Blades for High-Production Sawing
309203120.000 309203120.000 Image Match (1543) Flyer
16185 products
DoALL DoALL 309-203, 120" Welded, Dart Carbon Steel Band Saw Blade, 3/4x0.032", 6C TPI
Blades For Non-Production Sawing
TT75788 TT75788 Image Match (73) USA M16x1.5 HSS Metric Hand Tap, Plug, 4-Flute, HSS, TiN Coated, D6 Limit, USA Series 757
Straight Flute Taps - General Purpose
1400108300 1400108300 Image Match (2594) Osg #5-40 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, H3, Bright Finish, OSG 14001 Series
Thread Forming Taps - General Purpose
303934148.000 303934148.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-934, 148" Welded, Silencer GP Bi-Metal Band Saw Blade, 1/2x0.035", 6-10 TPI
Premium Blades for General Purpose Sawing
CD50304 CD50304 Image Match (115) USA D Size Heavy-Duty Jobber Length Drill - Type J, M42 Cobalt, Straw, 135 Deg Split Point, Series 500
Heavy-Duty Split Point Jobber Length Drills
5751098 5751098 Image Match (2) Sandvik SPMT 12 04 08-WH H13A Sandvik U-Max, Carbide Insert for Milling, Uncoated
Indexable Milling Inserts
00051115328664 00051115328664 Image Match (165) Standard Abrasives Standard Abrasives 702091, Straight Cartridge Roll , 1/2 x 1-1/2 x 1/8", 50 Grit, Aluminum Oxide
Coated Abrasive Cartridge Rolls
554151 554151 Mitsubishi 11.2mm Mitsubishi Solid Carbide Internal Coolant Drill, 3XD, Grade DP7020, MMS Series
HP Drills - Short Length - Coolant Fed
5743867 5743867 Image Match (4) Sandvik R245-12 T3 E-W 1020 Sandvik CoroMill 245, Carbide Insert for Milling, TiAlN Coating
Indexable Milling Inserts
5763199 5763199 Image Match (58) Sandvik Sandvik 5513 020-06, Torx Plus Insert Screw
Fasteners & Hardware
00051115364198 00051115364198 Image Match (60) Standard Abrasives Standard Abrasives 888012, Floor Mounted/Platen Belt - Type RC, 2 x 48", Very Fine Grade, Aluminum Oxide
Surface Conditioning Low Stretch Belt
9006510014600 9006510014600 Image Match (413) Guhring 1.46mm General Purpose Jobber Length HSS Drill, TiN Coated, Guhring Series 651
Standard Jobber Length Drills
1230000 1230000 Image Match (374) Osg 1/4-20 HSS Spiral Point Plug Tap, H3, 2-Flute, Bright Finish, OSG 105 Series
Spiral Point Taps - General Purpose
00051115273032 00051115273032 Image Match (104) 3M 3M 27303, Trizact 237AA, Cloth Belt, 4 x 352", A160 Grade, Aluminum Oxide
Coated Abrasive Narrow Belts
TR94222 TR94222 Image Match (1395) USA 0.1500" HSS Chucking Reamer, 4-Flute, 1" LOC, USA Series 933
Chucking Reamers
697080 697080 Mitsubishi 14.20mm Solid Carbide Internal Coolant Drill, 3XD, 16mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Standard Length - Coolant Fed
67684 67684 Image Match (554) Sgs 11.40mm HI-PERCARB Triple Margin Carbide Drill, Ti-NAMITE-B Coating, 3xD, SGS Series 131N
HP Drills - Short Length
EN1601DX14 EN1601DX14 Image Match (366) Lift-All Webmaster 1200 Endless Web Sling, , 1" x 14',1-Ply Polyester
Web Slings
6427591 6427591 Image Match (38) Sandvik Sandvik QD-LFH45C3232A, CoroCut QD Shank Tool for Parting and Grooving, 170mm LF
Parting & Grooving Tool Holders
8595371 8595371 Image Match (1013) Osg 3.71mm EX-SUS-GOLD Stub Length HSSE Drill, TiN Coating, ≤3xD, OSG Series 1100
HP Drills - Short Length
060013 060013 Image Match (76) Precision Twist Drill #13 Size Screw Machine Length HSS Parabolic Flute Drill, Bright Finish, 3XD, Precision Twist Drill QC41P Series
Screw Machine Length Parabolic Flute Drills
TR94119 TR94119 Image Match (1395) USA 0.0880" HSS Chucking Reamer, 4-Flute, 3/4" LOC, USA Series 933
Chucking Reamers
8690370 8690370 Image Match (859) Flyer
1623 products
Osg 3.70mm OSG A Brand ADO 3D Stub-Length Coolant-Through Carbide Drill, EgiAs Coated, 3XD, Series 6500
HP Drills - Short Length - Coolant Fed
101-120 101-120 Mitutoyo Mitutoyo 101-120, Outside Vernier Micrometer, 3-4", Ratchet Stop
Vernier Outside Micrometers
9055370027000 9055370027000 Image Match (208) Guhring 2.00mm, GU 500 DZ Taper Length Cobalt Drill, 10XD, TiN Coated, Guhring Series 5537
HP Drills - Extra Long
5751182 5751182 Image Match (6) Sandvik Sandvik SRSCR 2525M 12, CoroTurn 107 Shank Tool for Turning, Right Hand, 25 x 25mm Shank
Turning Tool Holders
260034 260034 Image Match (64) Rock River Tool 17/32" Jobber Length Carbide Tipped Drill, 118 Deg Point, Rock River Series 2600
Web Visibility Category A
66253262596 66253262596 Image Match (2) Norton Norton 5SG60-GVSP, Toolroom Grinding Wheel - Type 01 Straight, 12 x 1-1/2 x 5", Ceramic Alumina
Surface Grinding Wheels
TC14704 TC14704 Image Match (11) USA 1/16" Double-End Ball-End Stub-Length Carbide End Mill, 4-Flute, ALTIN Coated, USA Series 147
Double-End Ball-End End Mills
no image available 07660788277 Norton Gemini Alundum, Type 01 Bench and Pedestal Wheel, 8 x 3/4 x 1", 60/80 Grit, Aluminum Oxide
Bench & Pedestal Wheels
SMDT2200MTLACZ70S SMDT2200MTLACZ70S Image Match (251) Sumitomo SMDT2200MTL-ACZ70S, 22.0mm Sumitomo Carbide Replaceable Drill Tip
Replaceable Dill Tips & Inserts
10T5816 10T5816 Image Match (18) Flyer
908 products
Sumitomo CPGT431-AC5015S Sumitomo, 80° Postive Carbide Turning Insert with Hole, 1/2" IC
Turning Inserts
3106621 3106621 Image Match (40) Osg 8.0mm Regular Length Ball-End Carbide End Mill, WXL Coated, 2-Flute, OSG 3106621, Series 3710
HP Ball-End End Mills
32186 32186 Image Match (65) Holo-Krome Holo-Krome Cup Point Socket Set Screws, 3/8-16x1-3/4
Fasteners & Hardware

* all information within this site (including price data) is provided as general guidance, with no guarantee of completeness, accuracy, or timeliness. For detailed specifications please review the product pdf datasheet where available.

Created:
Last modified: