Home New Products

The MRO Data Aggregator

New Products from DGI Supply

IMAGE SPECIFICATION IMAGE MATCHES DATASHEET BRAND DESCRIPTION
CL-270-PL CL-270-PL Carr Lane Carr Lane CL-270-PL, Toggle Pliers, Hex-Head Spindle, 700 lbs
Toggle Pliers
0614242 0614242 Image Match (113) Dormer 10.00mm Standard Length High Performance Solid Carbide Drill, TiALN Coated, Precision Twist Drill Series R454
HP Drills - Standard Length
8704930 8704930 Image Match (859) Osg 9.30mm OSG A Brand ADO Taper Length Coolant-Fed Carbide Drill, EgiAs Coated, 8xD, Series 6520
HP Drills - Standard Length - Coolant Fed
J5431H J5431H Image Match (39) Proto Proto J5431H, 6-Point Standard Length Socket, 1/2" Drive, Size: 31/32", Full Polish Finish
Tools, Instruments, & Hardware
5733910 5733910 Image Match (56) Sandvik Sandvik LF151.37-16-064B25, T-Max Q-Cut Shank Tool for Face Grooving, 6" LF
Parting & Grooving Tool Holders
10545034 10545034 Mitsubishi 6.80mm Solid Carbide Internal Coolant Drill, 30XD, 7mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Extra Long - Coolant Fed
0034712 0034712 Image Match (30) Dormer Hydra H855 H85541/64, Replaceable Head Drill Body, 5xD, 5/8 - 41/64" Range, 3/4" Shank
Replaceable Tip Drill Bodies
31183 31183 Image Match (80) Sgs 15/64" Double-End Square-End Carbide End Mill, AlTiN Coated, 4-Flute, SGS Series 14
Double-End Square-End End Mills
1400133601 1400133601 Image Match (2594) Osg 5/16-24 HY-PRO NRT HSS-CO Thread Forming Tap, 4.5P Chamfer, H2, Steam Oxide Coated, OSG 14001 Series
Thread Forming Taps - General Purpose
959143 959143 Mitutoyo Mitutoyo 959143, Data Hold Unit
Data Collection Hardware
5765443 5765443 Image Match (222) Sandvik 880-D2500C4-04 CoroDrill 880 Indexable Insert Drill, 25.00mm, 4xD, Coromant Capto C4-04
Indexable Drill Bodies
36637 36637 Image Match (15) Sgs 3/4" Multi-Carb Corner Radius Carbide End Mill, Ti-Namite A Coating, 11-Flute, 0.090" C.R., SGS Series 66CR
HP Corner Radius End Mills
29136 29136 Image Match (2) Shaviv Shaviv 29136, Glo-Burr B Series with B10 Blade Assortment
Deburring Tools
5748255 5748255 Image Match (30) Sandvik 15.00mm CoroDrill R840 Delta-C Solid Carbide Drill, (Ti,Al)N Coating, 3xD
HP Drills - Short Length
18114 18114 Image Match (271) Precision Brand Products Precision Brand 18114, 3/16" Diameter W-1, Water Hardening Drill Rod, 36" Length
Drill Rod
TC16516 TC16516 Image Match (14) USA 1/4" Long Length Ball-Nose Solid Carbide End Mill, 4-Flute, 1-1/8" LOC, Bright Finish, USA, 165 Series
Ball-End Endmills
495-3124 495-3124 Image Match (33) Osg 5/16" Corner Radius Carbide End Mill, 0.045" CR, 2-Flute, Bright Finish, OSG 495 Series
Corner Radius Endmills
TR96348 TR96348 Image Match (1395) USA USA 26517, #48 Size, M42 Cobalt Chucking Reamer, 4-Flute, Series 1933
Chucking Reamers
6868349 6868349 Image Match (22) Sandvik TCMT 2(1.5)2-UR 3210 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
no image available CCMT32.51EFP-T2000Z Sumitomo CCMT 32.51 EFP T2000Z Sumitomo, Cermet 80° Positive Turning Insert with Hole, 3/8" IC
Turning Inserts
51469 51469 Image Match (2) Starrett Starrett 387-18, Steel Steel Straight Edge with Bevel & Graduations, 18 Inch
Straight Edges
8597386 8597386 Image Match (655) Osg #24 Size EX-SUS-GOLD Jobber Length HSSE Drill, TiN Coating, OSG Series 1600
HP Drills - Standard Length
335620293.000 335620293.000 Image Match (2193) Flyer
16185 products
DoALL DoALL 335-620, 293" Welded Metal Master Carbon Steel Band Saw Blade, 1x0.035", 3C TPI
Blades For General Purpose Sawing
5748750 5748750 Image Match (108) Sandvik 8.6mm CoroDrill Delta-C Coolant Through Solid Carbide Drill, 2-3XD, TiAlN Coated
HP Drills - Short Length - Coolant Fed
153-204 153-204 Mitutoyo Mitutoyo 153-204, 0-25mm, 0.01mm (0.001mm with Vernier), Micrometer Head, 12mm Plain Stem, Flat Carbide Tipped Spindle Face, Non-Rotating Spindle
Vernier Micrometer Heads
00021200243875 00021200243875 Image Match (2) 3M 3M VHB Tape 4926 Gray, 3/4 in x 72 yd 15.0 mil
Foam Tape
4C1ZH-0014 4C1ZH-0014 Image Match (178) Allied Machine Allied Machine 4C1ZH-0014, 7/16" GEN2 T-A Drill Insert, Series Z
Replaceable Drill Inserts
6426003 6426003 Image Match (52) Sandvik 870-2800-28LX125-8, Sandvik CoroDrill 870 Inch Shank Drill Body with Internal Coolant Supply, 8X Hole Depth
Replaceable Tip Drill Bodies
303400114.000 303400114.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-400, 114" Welded, Silencer GP Bi-Metal Band Saw Blade, 1x0.035", 8-12 TPI
Premium Blades for General Purpose Sawing
0136001 0136001 Image Match (495) Osg #6-32 EXOTAP VA-3 Spiral Flute HSSE Tap, Bottom, 3-Flute, H2, Steam Oxide, OSG Series 303
High Performance Spiral Flute Taps
17343808 17343808 Image Match (47) Osg 11/32" V-HO-GDR Coolant-Through HSS-CO Oil Hole Drill, V-Coating
HP Drills - Standard Length - Coolant Fed
B00005-P000-0001 B00005-P000-0001 Image Match (73) Technical Data Sheet
4 products
CIMCOOL CIMTECH 304MA, Synthetic Metalworking Fluid, Undyed, 5 Gallon
Synthetic Cutting & Grinding Fluids
5755418 5755418 Image Match (4) Sandvik VBGT 332-UM H13A Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
303900111.500 303900111.500 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-900, 111.5" Welded, Silencer GP Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for General Purpose Sawing
303182102.500 303182102.500 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-182, 102.5" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 5-8 TPI
Premium Blades for General Purpose Sawing
HP258-4567 HP258-4567 Image Match (158) Osg 11.60mm HY-PRO CARB Performance Carbide Coolant Drill, TiALN Coated, 8XD, OSG Series HP258
HP Drills - Standard Length - Coolant Fed
8720560 8720560 Image Match (301) Osg 5.60mm A Brand ADO-TRS Stub-Length Coolant-Thru 3-Flute Carbide Drill, 3xD, EgiAs Coated, OSG Series 6600
HP Drills - Short Length - Coolant Fed
72059 72059 Image Match (71) Harvey Tool 0.059" Harvey Tool, Miniature Square End Carbide End Mill, Uncoated, 3XD, 2-Flute
Miniature Square-End End Mills
TC26658 TC26658 Image Match (71) USA 5/8" Vi-Pro Variable Index Corner Radius Carbide End Mill, ALCRO-Max Coating, 5-Flute, Weldon Shank, 0.060" C.R., USA Series V52RR
HP Corner Radius End Mills
TC58051 TC58051 Image Match (103) USA 0.051" Square-End Carbide Micro Endmill, Uncoated, 4-Flute, USA Series 580
Miniature Square-End End Mills
TC79107 TC79107 Image Match (158) USA G Size Jobber Length Split Point Carbide Drill, ALTIN Coated, USA Series 191
Split-Point Jobber Length Drills
6A106 6A106 Image Match (2) Lift-All Load Hugger 6A106, Ratchet Type Cargo Control Tiedown, ZP Hook, 1" x 15'
Tie Down Straps
5733863 5733863 Image Match (27) Sandvik L151.2-250 15-5F 1125 Sandvik, T-Max Q-Cut, Carbide Insert for Parting, Seat Size - 25
Parting Off, Grooving, Profiling & Turning Inserts
33650 33650 Image Match (49) Harvey Tool 0.050" Harvey Tool Miniature Square End Carbide End Mill, Uncoated, 8XD, 3-Flute
Miniature Square-End End Mills
34507 34507 Image Match (34) Sgs 5/16" Ski-Carb Corner Radius Carbide End Mill, Uncoated, 2-Flute, Weldon Shank, 0.015 - 0.060" C.R., SGS Series 44
HP Corner Radius End Mills
A01150007 A01150007 Image Match (48) Krylon Krylon A01150, TOUGH COAT Acrylic Enamel, Gloss Zinger Pink, 12 oz. (net) Aerosol
Aerosol Paints & Coatings
334581116.250 334581116.250 Image Match (2193) Flyer
16185 products
DoALL DoALL 334-581, 116.25" Welded Metal Master Carbon Steel Band Saw Blade, 3/4x0.032", 10 TPI
Blades For General Purpose Sawing
9003010008100 9003010008100 Image Match (219) Guhring #67 Size Micro-Precision (Type N) Cobalt Drill, Bright Finish, Guhring Series 301
Micro Drills - Non-Coolant Fed
9041120305000 9041120305000 Image Match (141) Guhring Guhring 9041120305000, 30.50mm, HT 800 WP Interchangeable Drill Insert, Body Size 305
Replaceable Dill Tips & Inserts
335505131.500 335505131.500 Image Match (2193) Flyer
16185 products
DoALL DoALL 335-505, 131.5" Welded Metal Master Carbon Steel Band Saw Blade, 1/2x0.025", 6C TPI
Blades For General Purpose Sawing
60314H-20CM 60314H-20CM Image Match (81) Allied Machine Allied Machine 60314H-20CM, GEN3SYS, Series 14 Straight Shank Helical Flute Holder, 3xD Length
Replaceable Tip Drills
1000-0264 1000-0264 Image Match (2) Victor Victor 10000264 Single Gas Calibration Flowmeter
Regulators & Flowmeters
815 815 Western Enterprises Western Enterprises 815 Adaptor
Regulator & Flowmeter Parts
10543061 10543061 Mitsubishi 10.00mm Solid Carbide Internal Coolant Drill, 25XD, 10mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Extra Long - Coolant Fed
619321 619321 Image Match (4) Mitsubishi VNMG 332 MC6025 Mitsubishi, Carbide 35° Negative Turning Insert with Hole, 3/8" IC
Turning Inserts
934820 934820 Image Match (323) Harvey Tool 0.5mm, Harvey Tool Long Reach Stub Flute Carbide End Mill, Uncoated, 7xD, 3-Flute
Miniature Square-End End Mills
307665186.000 307665186.000 Image Match (771) Flyer
16185 products
DoALL DoALL 307-665, 186" Welded Penetrator Prime Powder Metal Bi-Metal Band Saw Blade, 1x0.035", 4-6 TPI
Premium Blades for High-Production Sawing
303300115.000 303300115.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-300, 115" Welded, Silencer GP Bi-Metal Band Saw Blade, 3/4x0.035", 8-12 TPI
Premium Blades for General Purpose Sawing
1400E 1400E Telesteps Telesteps 1400E, Telescopic Extension Ladder, 14 foot
Web Visibility Category A
30004P 30004P Tap Magic Tap Magic ProTap Cutting Fluid, 4 Ounce
Tapping Fluids
29140 29140 Burr King Burr King Model 12 Disc Grinder, 120 VAC, 1 PH
Web Visibility Category A
U45 12200 U45 12200 Image Match (399) Komet KOMET U45 12200, 0.866", KUB Pentron, Cylindrical Shank Indexable Insert Drill, 5xD, 25 x 56mm Shank
Web Visibility Category A
003533 003533 Image Match (105) Precision Twist Drill #40 Size General Purpose Jobber Length Carbide Drill, Uncoated, Precision Twist Drill Series D33W
Standard Jobber Length Drills
20601 20601 Image Match (9) Te-Co TE-CO 20601, 38-Piece T-Nut and Stud Kit, 5/16"-18 Stud, 3/8" Slot Size
Clamping Kits
10339 10339 Image Match (12) Whitney Tool Whitney Tool DA150090, Double Angle Chamfer Milling Cutter, 90 Degree, 1-1/2 x 9/16", HSS, 12T
Double-Angle Chamfer Milling Cutters
1701001 1701001 Image Match (267) Osg 3/8-16 EXOTAP VC-10 High Performance Spiral Point Gun Tap, H5, 3-Flute, VC-10 Material, Steam Oxide Coated, OSG Series 312
High Performance Spiral Point Taps
EN30X18 EN30X18 Image Match (19) Lift-All Tuflex EN30X18, Endless Roundsling, EN30, Purple, 18'
Roundslings
381446184.000 381446184.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-446, 184" Welded Supreme Bi-Metal Band Saw Blade, 1-1/2 x 0.050", 4-6 TPI
Ultra-Premium Blades for High Production Sawing
20425500 20425500 Image Match (140) Osg 5/8" EXOCARB Aero Blizzard Regular Length Corner Radius Carbide End Mill, 3-Flute, 0.06" CR, OSG Series 2042
HP Aluminum Cutting End Mills
6425481 6425481 Image Match (36) Widia VSM490D063Z07S22XN10 Widia, Victory VSM490-10 Shell Mill, 63mm Cutting Diameter
Indexable Milling Cutter Bodies
320625413.000 320625413.000 Image Match (1238) Flyer
16185 products
DoALL DoALL 320-625, 413" Welded, Structurall Bi-Metal Band Saw Blade, 2-5/8x0.063", 2-3 (Extra-Wide Set) TPI
Premium Blades for Sawing Structures
698411 698411 Mitsubishi 14.90mm Solid Carbide Internal Coolant Drill, 5XD, 15mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Standard Length - Coolant Fed
052036 052036 Image Match (192) Precision Twist Drill #36 Size HSS Taper Length Drill, Bright Finish, Precision Twist Drill R52 Series
Standard Taper Length Drills
66252842029 66252842029 Norton Norton 42029, Gemini Type 27 Depressed Center Wheel, 4-1/2 x 1/8 x 5/8-11, Aluminum Oxide
Depressed Center Wheels
0614846 0614846 Image Match (129) Dormer 14.50mm MP-X Short Length Coolant Thru High Performance Solid Carbide Drill, TiALN Coated, Precision Twist Drill 0614846, Series R457
HP Drills - Short Length - Coolant Fed
059621 059621 Image Match (84) Precision Twist Drill 21/64", General Purpose Extra-Length HSS Drill, 12", Bright Finish, Precision Twist Drill Series 1290
Extra Length Twist Drills
33618 33618 Bondhus Bondhus 33618, ProHold Replacement Standard Hex-Bit for Hex End Sockets 5/8 Inch
Socket Bits
381511334.000 381511334.000 Image Match (838) Flyer
16185 products
DoALL DoALL 381-511, 334" Welded Supreme Bi-Metal Band Saw Blade, 2 x 0.063", 1-1.3 TPI
Ultra-Premium Blades for High Production Sawing
04212IS 04212IS Image Match (3) Techniks Techniks 04212IS, 18-Piece ER32 Collet Set, Inch Range: 7/32 - 3/4" by 32nds
Collet Sets
642847 642847 Image Match (6) Mitsubishi VNMG 331 LM MC7025 Mitsubishi, Carbide 35° Negative Turning Insert with Hole, 3/8" IC
Turning Inserts
HP243-3425 HP243-3425 Image Match (345) Osg 8.70mm HY-PRO CARB Stub Length Carbide Drill, TiALN Coating, 3xD, OSG Series HP243
HP Drills - Short Length
5755983 5755983 Image Match (2) Sandvik VNMG 331-MF 1105 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
5738450 5738450 Image Match (5) Sandvik N331.1A-04 35 05H-WL 1025 Sandvik CoroMill 331, Carbide Insert for Slotting, TiCN + TiN Coating
Indexable Milling Inserts
8664000 8664000 Image Match (268) Technical Data Sheet
437 products
Osg 20.00mm EXOPRO Mega Muscle Jobber Length Coolant-Thru Carbide Drill, 3-Flute, WD1 Coated, 5XD, OSG Series 5610
HP Drills - Standard Length - Coolant Fed
10653 10653 Image Match (54) ATA Tools 1/8" SA-43 Bur, Cylinder, Double Cut, Solid Carbide
Rotary Burs
313502120.000 313502120.000 Image Match (144) Flyer
16185 products
DoALL DoALL 313-502, 120" Welded, Straight Knife-Edge Band Saw Blade, 3/4x0.032, Single Edge; Double Bevel
Straight Knife-Edge Band Saw Blades
668967 668967 Mitsubishi 11.30mm Solid Carbide Internal Coolant Drill, 5XD, 12mm shank, PVD Coated, Mitsubishi Series MVS
HP Drills - Standard Length - Coolant Fed
72340 72340 Image Match (23) Southern Gage Southern Gage 72340, AGD Limit Snap Gage, 10 Frame, Range: 4-15/16 - 5-5/16
AGD Snap Gages
47255 47255 Image Match (453) Harvey Tool 10.4mm Harvey Tool, Corner Radius Carbide End Mill, 0.003" C.R., 4-Flute, 3xD, Uncoated
Miniature Corner Radius End Mills
66261130241 66261130241 Norton Norton 66261130241, No-Fil Adalox A290 Hook and Loop Paper Disc, 5 x Hook & Loop, 150 Grit, Aluminum Oxide, 50 discs/pkg
Hook & Loop Discs
388674 388674 Mitsubishi #73 Size, MWS Series, Solid Carbide Internal Coolant Drill, 5XD, ALTiN Coating, Mitsubishi MWS00240LB
HP Drills - Standard Length - Coolant Fed
EE1804NFX9 EE1804NFX9 Image Match (368) Lift-All Webmaster 1600 Web Sling, Eye & Eye - Flat, 4" x 9',1-Ply Nylon
Web Slings
303010137.000 303010137.000 Image Match (3628) Flyer
16185 products
DoALL DoALL 303-010, 137" Welded, Silencer GP Bi-Metal Band Saw Blade, 1/4x0.035", 10-14 TPI
Premium Blades for General Purpose Sawing
5745585 5745585 Image Match (49) Sandvik R390-063C6-18M060 Sandvik, CoroMill 390 Square Shoulder Milling Cutter, 63mm Cutting Diameter
Indexable Milling Cutter Bodies
50129 50129 Image Match (33) KEO CUTTERS 1/2" HSS 3 Flute Center Reamer, Countersink Angle - 90°, Uncoated
Center Reamers
00048011160818 00048011160818 Image Match (18) 3M Scotch-Brite 16081, Cut & Polish Disc, 6", 3/4" Arbor Hole, Medium, Aluminum Oxide
Non-Woven Center Arbor Hole Discs
7374529 7374529 Image Match (3) Sandvik Sandvik QD-NN1G60C25AY, CoroCut QD Parting Off & Grooving Blade - Size 25, 60mm Cutting Depth
Parting Off Blades
EN2812TX4 EN2812TX4 Image Match (454) Flyer
2278 products
Lift-All TUFF-EDGE III EN2812T Polyester Endless Web Sling, 12" x 4', 2-Ply
Web Slings
9055120037000 9055120037000 Image Match (155) Guhring 3.70mm, RT 100 U Coolant-Through Carbide Drill, 7XD, FIREX Coated, Guhring Series 5512
HP Drills - Standard Length - Coolant Fed
no image available TT90344 Hanson Whitney 032117 1/4-28 HS 2FL H3PL TAP D300
Web Visibility Category A
5746764 5746764 Image Match (104) Sandvik 5.10mm, CoroDrill R840 Delta-C Coolant Through Solid Carbide Drill, 7xD, Cylindrical Shank
HP Drills - Standard Length - Coolant Fed
018304 018304 Image Match (80) Precision Twist Drill #4 Size Heavy Duty Jobber Length Drill - NAS 907 Type J, Cobalt, Bronze Oxide Coated, Precision Twist Drill R18CO Series
Heavy-Duty Split Point Jobber Length Drills
5753473 5753473 Image Match (44) Sandvik TLG-2125R 1125 Sandvik, Top Lok, Carbide Insert for Grooving, Seat Size - 2
Parting Off, Grooving, Profiling & Turning Inserts
1400152305 1400152305 Image Match (2594) Osg 5/8-18 HY-PRO NRT HSS-CO Thread Forming Tap, 2.5P Chamfer, H10, TiN Coated, OSG 14001 Series
Thread Forming Taps - General Purpose
TC79322 TC79322 Image Match (158) USA 2.2mm Jobber Length Split Point Carbide Drill, ALTIN Coated, USA Series 191
Split-Point Jobber Length Drills
166RESS 166RESS Image Match (130) Sumitomo 4NC-VNGA 332 BNC2020 Sumitomo, CBN 35° Negative Turning Insert with Hole, 3/8" IC
Turning Inserts
5725042 5725042 Image Match (42) Sandvik CNMG 543-KR 3205 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
no image available 02300 Lenco Lenco MSG-500 Ground Clamp, 02300
Ground Clamps
MDW1250HGS3 MDW1250HGS3 Image Match (198) Sumitomo 12.5mm Carbide Coolant Through Drill, 3XD, PVD DEX Coated, Sumitomo MDW-HGS3 Series
HP Drills - Short Length - Coolant Fed
34501201 34501201 Image Match (368) Osg M18-2.5 EXOTAP VC-10 High Performance Spiral Flute VC-10 STI Tap, 4-Flute, D5, 2.5P-3P Chamfer, Steam Oxide Coating, OSG Series 345VC-10 STI
Screw Thread Insert Spiral Flute Taps
01140 01140 Image Match (18) Severance Severance 01140, 1/2" Four Flute Carbide Countersink, 82 Deg, Chatter-Free Econo-Sinks
Web Visibility Category A
113851 113851 Mitsubishi Mitsubishi JSS7, Clamp Screw, M7 x.03
Fasteners & Hardware
EN2806DX14 EN2806DX14 Image Match (366) Lift-All Webmaster 1600 Endless Web Sling, , 6" x 14',2 Ply Polyester
Web Slings
no image available 20816 Wilton Hammer 8lb 16in Sledge B.A.S.H
Web Visibility Category A
20210200 20210200 Image Match (140) Osg 1/8" EXOCARB Aero Blizzard Stub Length Corner Radius Carbide End Mill, 2-Flute, 0.01" CR, OSG Series 2021
HP Aluminum Cutting End Mills
5742892 5742892 Image Match (14) Sandvik 8.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 4-Flute, TiAlN Coated, 2.00mm Corner Radius
HP Corner Radius End Mills
309187105.000 309187105.000 Image Match (1543) Flyer
16185 products
DoALL DoALL 309-187, 105" Welded, Dart Carbon Steel Band Saw Blade, 3/4x0.032", 3C TPI
Blades For Non-Production Sawing
5742834 5742834 Image Match (8) Sandvik 6.00mm CoroMill Plura Solid Carbide Square Shoulder End Mill, 6-Flute, TiAlN Coated
HP Square End Endmills
0626634 0626634 Image Match (115) Dormer 8.10mm MP-X Short Length High Performance Solid Carbide Drill, TiALN Coating, 3xD, Precision Twist Drill Series R458
HP Drills - Short Length
TC57249 TC57249 Image Match (108) USA 0.049" Ball Nose Regular-Flute Carbide Micro End Mill, 3xD, 2-Flute, ALTIN Coated, USA Series 572
Miniature Ball-End End Mills
02861 02861 Image Match (124) M.A. Ford 4.4mm Twister XD Coolant Fed Carbide Drill, 7xD, Altima Coated
HP Drills - Standard Length - Coolant Fed
EE360X11 EE360X11 Image Match (91) Lift-All Tuflex EE360X11, RoundSling, Eye & Eye, Grey, 11'
Roundslings
1400116800 1400116800 Image Match (2594) Osg #8-36 HY-PRO NRT HSS-CO Thread Forming Tap, 2.5P Chamfer, H10, Bright Finish, OSG 14001 Series
Thread Forming Taps - General Purpose
310-002706 310-002706 Image Match (29) Monster Tool Company 3/8" SC-3L6 Bur, Cylinder - Radius End, Double Cut, Steel Shank/Carbide Head
Web Visibility Category A
26040 26040 Image Match (12) Mitee-Bite Miteebite 26040, Pitbull Blunt Edge Fixture Clamp, Brass, #8-32 Screw Size, 400 lb
Pitbull-Clamps
MDW105XHV12 MDW105XHV12 Image Match (2) Sumitomo 10.5mm Carbide Coolant Through Drill, PVD DEX Coated, 12XD, Sumitomo Series MDW-XHV
HP Drills - Extra Long - Coolant Fed
HP258-4016 HP258-4016 Image Match (158) Osg 10.20mm HY-PRO CARB Performance Carbide Coolant Drill, TiALN Coated, 8XD, OSG Series HP258
HP Drills - Standard Length - Coolant Fed
5724307 5724307 Image Match (54) Sandvik Sandvik CDJNL 164D-4, T-Max Shank Tool for Turning, Left Hand, 1 x 1" Shank
Turning Tool Holders
5723469 5723469 Image Match (21) Sandvik CCMT 432-KR 3210 Sandvik, CoroTurn 107, Carbide Insert for Turning
Turning Inserts
TC10101 TC10101 Image Match (37) USA 1/64" Square End Regular Length Carbide End Mill, 1/32" L.O.C., 2-Flute, ALTiN Coated, USA Series 101
Square End Endmills
no image available 1646-1607 Tweco Tweco Robotics WRS64-180 Conductor Tube (400A, 180 DEG) Water-Cooled
Mig Goose Necks
13033 13033 Image Match (11) Nicholson Nicholson 13033, Square File, 6", Smooth Cut
American Pattern Files
TT90185S TT90185S Image Match (130) USA #8-32 HSS Hand Tap, Plug, 4-Flute, HSS, Steam Oxide Coated, H3 Limit, USA Series 726
Straight Flute Taps - General Purpose
7548909 7548909 Image Match (43) Flyer
343 products
Sandvik DS20-D3300L40-05 CoroDrill DS20 Indexable Insert Drill, 33.00mm, 5xD, Cylindrical with Flat
Indexable Drill Bodies
63766 63766 Image Match (228) Sgs 7.90mm HI-PERCARB Double Margin Carbide Drill, AlTiN Coating, 3xD, SGS Series 135M
HP Drills - Short Length
010512 010512 Image Match (31) Precision Twist Drill 3/16" High Helix Jobber Length HSS Drill, Bright Finish, Precision Twist Drill Series R10H
Standard Jobber Length Drills
6241434 6241434 Image Match (290) Sandvik 9.50mm CoroDrill 460 Solid Carbide Drill, TiAlN Coating, 3xD
HP Drills - Short Length
no image available 0325-0102 Victor Victor 0325-0102 Flexible Elbow, Type FE-J, 11.5 inch Length
Tips & Nozzles
EE30X17 EE30X17 Image Match (17) Lift-All Tuflex EE30X17, RoundSling, Eye & Eye, Purple, 17'
Roundslings
571727 571727 Mitsubishi TAWKH2200TG DP5010 Mitsubishi, Carbide Drilling Insert, 0.8660", TAW Series
Replaceable Dill Tips & Inserts
9057590051000 9057590051000 Image Match (200) Technical Data Sheet
361 products
Guhring 5.10mm RT 100 S Coolant-Fed Carbide Drill, nano-FIREX Coated Tip, 5xD, Guhring Series 5759
HP Drills - Standard Length - Coolant Fed
6868492 6868492 Image Match (20) Sandvik DNMG 443-KF 3225 Sandvik, T-Max P, Carbide Insert for Turning
Turning Inserts
TE20486 TE20486 Image Match (4) Lift-All Load Hugger TE20486, Ratchet Type Cargo Control Tiedown, Chain Grab Hook, 3" x 27'
Tie Down Straps
14732-B246 14732-B246 Image Match (27) F&D TOOL F&D TOOL 14732-B246, Plain Slitting Saw, 5 x 1/16 x 1", 40 Teeth
Slitting Saws
EE2806DFX18 EE2806DFX18 Image Match (368) Lift-All Webmaster 1600 Web Sling, Eye & Eye - Flat, 6" x 18',2 Ply Polyester
Web Slings
6040438 6040438 Image Match (302) Sandvik 10.60mm CoroDrill 860 Long Length Coolant Fed Carbide Drill, 4-5xD, TiAlN Coated
HP Drills - Extra Long - Coolant Fed
8597463 8597463 Image Match (655) Osg 4.63mm EX-SUS-GOLD Jobber Length HSSE Drill, TiN Coating, OSG Series 1600
HP Drills - Standard Length
00162 00162 Image Match (184) Alvord Polk Alvord Polk 00162, 11.0mm, High Speed Steel Chucking Reamer, 6-Flute, Series 127-0
Web Visibility Category A
022025 022025 Image Match (107) Precision Twist Drill 25/64" Heavy Duty Jobber Length Drill - HX Series, HSS, Purple & Bronze Oxide Coated, Precision Twist Drill HX10 Series
Heavy-Duty Split Point Jobber Length Drills
0626641 0626641 Image Match (115) Dormer 8.80mm MP-X Short Length High Performance Solid Carbide Drill, TiALN Coating, 3xD, Precision Twist Drill Series R458
HP Drills - Short Length
9024640040000 9024640040000 Image Match (198) Guhring 4.00mm General Purpose Jobber Length Carbide Drill, Firex Coated, Guhring Series 2464
Standard Jobber Length Drills

* all information within this site (including price data) is provided as general guidance, with no guarantee of completeness, accuracy, or timeliness. For detailed specifications please review the product pdf datasheet where available.

Created:
Last modified: