Home New Products
The MRO Data Aggregator

Square End Endmills 30825 30569 Datasheet & Specification

IMAGE SPECIFICATION BUY BRAND UOM DESCRIPTION
30825 SGS 30825 $20.54 SGS Each 15/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 15/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30569 SGS 30569 $140.78 SGS Each 11/16" Square-End Regular Length Carbide End Mill, 1-3/8" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 11/16 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30774 SGS 30774 $11.71 SGS Each 1/16" Square-End Regular Length Carbide End Mill, 3/16" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 1/16 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39757 SGS 39757 $55.33 SGS Each 29/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 29/64 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30832 SGS 30832 $32.61 SGS Each 11/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 11/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30806 SGS 30806 $141.50 SGS Each 3/4" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 3/4 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
48799 SGS 48799 $11.91 SGS Each 1.0mm Square-End Regular Length Carbide End Mill, 4mm L.O.C., 3-Flute, AlTiN Coated, SGS Series 5M
Diameter (mm): 1.0 Shank Diameter (mm): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30790 SGS 30790 $25.29 SGS Each 5/16" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 5/16 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30805 SGS 30805 $149.37 SGS Each 11/16" Square-End Regular Length Carbide End Mill, 1-3/8" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 11/16 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30814 SGS 30814 $11.71 SGS Each 1/16" Square-End Regular Length Carbide End Mill, 3/16" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 1/16 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30848 SGS 30848 $218.24 SGS Each 1" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 1 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30808 SGS 30808 $218.24 SGS Each 1" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 1 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30521 SGS 30521 $13.87 SGS Each 11/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 11/64 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30835 SGS 30835 $45.15 SGS Each 25/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 25/64 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39711 SGS 39711 $11.26 SGS Each 3/32" Square-End Regular Length Carbide End Mill, 9/32" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 3/32 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30783 SGS 30783 $20.01 SGS Each 13/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 13/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30845 SGS 30845 $149.37 SGS Each 11/16" Square-End Regular Length Carbide End Mill, 1-3/8" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 11/16 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30787 SGS 30787 $24.56 SGS Each 17/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 17/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30523 SGS 30523 $13.29 SGS Each 3/16" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 3/16 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39743 SGS 39743 $32.61 SGS Each 11/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 11/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30501 SGS 30501 $21.20 SGS Each 1/64" Square-End Regular Length Carbide End Mill, 1/32" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 1/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39729 SGS 39729 $20.54 SGS Each 15/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 15/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30815 SGS 30815 $11.83 SGS Each 5/64" Square-End Regular Length Carbide End Mill, 3/16" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 5/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30784 SGS 30784 $20.01 SGS Each 7/32" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 7/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30519 SGS 30519 $13.81 SGS Each 5/32" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 5/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39705 SGS 39705 $13.11 SGS Each 3/64" Square-End Regular Length Carbide End Mill, 7/64" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 3/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30780 SGS 30780 $15.38 SGS Each 5/32" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 5/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30803 SGS 30803 $85.51 SGS Each 9/16" Square-End Regular Length Carbide End Mill, 1-1/8" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 9/16 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30551 SGS 30551 $41.16 SGS Each 13/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 13/32 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30843 SGS 30843 $85.51 SGS Each 9/16" Square-End Regular Length Carbide End Mill, 1-1/8" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 9/16 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30826 SGS 30826 $18.31 SGS Each 1/4" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 1/4 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30543 SGS 30543 $29.34 SGS Each 11/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 11/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30793 SGS 30793 $31.99 SGS Each 23/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 23/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30527 SGS 30527 $17.99 SGS Each 7/32" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 7/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30800 SGS 30800 $56.61 SGS Each 15/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 15/32 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30807 SGS 30807 $208.06 SGS Each 7/8" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 7/8 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30839 SGS 30839 $55.33 SGS Each 29/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 29/64 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30775 SGS 30775 $11.83 SGS Each 5/64" Square-End Regular Length Carbide End Mill, 3/16" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 5/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30781 SGS 30781 $15.77 SGS Each 11/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 11/64 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30531 SGS 30531 $16.44 SGS Each 1/4" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 1/4 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30824 SGS 30824 $20.01 SGS Each 7/32" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 7/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30813 SGS 30813 $13.11 SGS Each 3/64" Square-End Regular Length Carbide End Mill, 7/64" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 3/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30823 SGS 30823 $20.01 SGS Each 13/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 13/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30837 SGS 30837 $45.58 SGS Each 27/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 27/64 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39739 SGS 39739 $25.29 SGS Each 5/16" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 5/16 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39777 SGS 39777 $10.45 SGS Each 1/8" Square-End Regular Length Carbide End Mill, 3/8" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 1/8 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30513 SGS 30513 $10.05 SGS Each 7/64" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 7/64 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30842 SGS 30842 $50.99 SGS Each 1/2" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 1/2 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30818 SGS 30818 $10.65 SGS Each 1/8" Square-End Regular Length Carbide End Mill, 1/2" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 1/8 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30820 SGS 30820 $15.38 SGS Each 5/32" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 5/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39769 SGS 39769 $149.37 SGS Each 11/16" Square-End Regular Length Carbide End Mill, 1-3/8" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 11/16 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30575 SGS 30575 $205.45 SGS Each 1" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 1 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30535 SGS 30535 $22.10 SGS Each 9/32" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 9/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30819 SGS 30819 $15.38 SGS Each 9/64" Square-End Regular Length Carbide End Mill, 1/2" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 9/64 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30567 SGS 30567 $88.59 SGS Each 5/8" Square-End Regular Length Carbide End Mill, 1-1/4" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 5/8 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30565 SGS 30565 $79.43 SGS Each 9/16" Square-End Regular Length Carbide End Mill, 1-1/8" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 9/16 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30830 SGS 30830 $25.29 SGS Each 5/16" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 5/16 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30817 SGS 30817 $11.24 SGS Each 7/64" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 7/64 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39751 SGS 39751 $45.58 SGS Each 13/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 13/32 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30834 SGS 30834 $30.63 SGS Each 3/8" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 3/8 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30772 SGS 30772 $12.86 SGS Each 1/32" Square-End Regular Length Carbide End Mill, 5/64" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 1/32 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39725 SGS 39725 $20.01 SGS Each 13/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 13/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39721 SGS 39721 $15.77 SGS Each 11/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 11/64 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30515 SGS 30515 $9.44 SGS Each 1/8" Square-End Regular Length Carbide End Mill, 1/2" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 1/8 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39767 SGS 39767 $95.48 SGS Each 5/8" Square-End Regular Length Carbide End Mill, 1-1/4" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 5/8 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39747 SGS 39747 $30.63 SGS Each 3/8" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 3/8 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30849 SGS 30849 $10.45 SGS Each 1/8" Square-End Regular Length Carbide End Mill, 3/8" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 1/8 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39763 SGS 39763 $50.99 SGS Each 1/2" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 1/2 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30503 SGS 30503 $11.71 SGS Each 1/32" Square-End Regular Length Carbide End Mill, 5/64" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 1/32 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30571 SGS 30571 $133.37 SGS Each 3/4" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 3/4 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39731 SGS 39731 $18.31 SGS Each 1/4" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 1/4 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30821 SGS 30821 $15.77 SGS Each 11/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 11/64 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39765 SGS 39765 $85.51 SGS Each 9/16" Square-End Regular Length Carbide End Mill, 1-1/8" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 9/16 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30561 SGS 30561 $50.88 SGS Each 31/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 31/64 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30785 SGS 30785 $20.54 SGS Each 15/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 15/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39719 SGS 39719 $15.38 SGS Each 5/32" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 5/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30816 SGS 30816 $11.26 SGS Each 3/32" Square-End Regular Length Carbide End Mill, 9/32" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 3/32 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30804 SGS 30804 $95.48 SGS Each 5/8" Square-End Regular Length Carbide End Mill, 1-1/4" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 5/8 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39741 SGS 39741 $32.61 SGS Each 21/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 21/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39771 SGS 39771 $141.50 SGS Each 3/4" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 3/4 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30537 SGS 30537 $22.98 SGS Each 19/64" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 19/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30539 SGS 30539 $22.75 SGS Each 5/16" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 5/16 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30778 SGS 30778 $10.65 SGS Each 1/8" Square-End Regular Length Carbide End Mill, 1/2" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 1/8 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30555 SGS 30555 $36.03 SGS Each 7/16" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 7/16 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30811 SGS 30811 $23.74 SGS Each 1/64" Square-End Regular Length Carbide End Mill, 1/32" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 1/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30525 SGS 30525 $17.99 SGS Each 13/64" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 13/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30809 SGS 30809 $10.45 SGS Each 1/8" Square-End Regular Length Carbide End Mill, 3/8" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 1/8 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39713 SGS 39713 $11.24 SGS Each 7/64" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 7/64 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30841 SGS 30841 $56.42 SGS Each 31/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 31/64 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39773 SGS 39773 $208.06 SGS Each 7/8" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 7/8 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39737 SGS 39737 $25.55 SGS Each 19/64" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 19/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39759 SGS 39759 $56.61 SGS Each 15/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 15/32 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30771 SGS 30771 $23.74 SGS Each 1/64" Square-End Regular Length Carbide End Mill, 1/32" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 1/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30833 SGS 30833 $31.99 SGS Each 23/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 23/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30773 SGS 30773 $13.11 SGS Each 3/64" Square-End Regular Length Carbide End Mill, 7/64" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 3/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30827 SGS 30827 $24.56 SGS Each 17/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 17/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30559 SGS 30559 $51.11 SGS Each 15/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 15/32 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30557 SGS 30557 $49.90 SGS Each 29/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 29/64 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39703 SGS 39703 $12.86 SGS Each 1/32" Square-End Regular Length Carbide End Mill, 5/64" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 1/32 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39701 SGS 39701 $23.74 SGS Each 1/64" Square-End Regular Length Carbide End Mill, 1/32" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 1/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30840 SGS 30840 $56.61 SGS Each 15/32" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 15/32 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30795 SGS 30795 $45.15 SGS Each 25/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 25/64 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30517 SGS 30517 $13.81 SGS Each 9/64" Square-End Regular Length Carbide End Mill, 1/2" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 9/64 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30529 SGS 30529 $18.10 SGS Each 15/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 15/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
48807 SGS 48807 $15.87 SGS Each 5.0mm Square-End Regular Length Carbide End Mill, 16mm L.O.C., 3-Flute, AlTiN Coated, SGS Series 5M
Diameter (mm): 5.0 Shank Diameter (mm): 6 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39749 SGS 39749 $45.15 SGS Each 25/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 25/64 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39707 SGS 39707 $11.71 SGS Each 1/16" Square-End Regular Length Carbide End Mill, 3/16" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 1/16 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30547 SGS 30547 $27.56 SGS Each 3/8" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 3/8 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30509 SGS 30509 $10.72 SGS Each 5/64" Square-End Regular Length Carbide End Mill, 3/16" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 5/64 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30511 SGS 30511 $10.05 SGS Each 3/32" Square-End Regular Length Carbide End Mill, 9/32" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 3/32 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30786 SGS 30786 $18.31 SGS Each 1/4" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 1/4 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30533 SGS 30533 $22.10 SGS Each 17/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 17/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39761 SGS 39761 $56.42 SGS Each 31/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 31/64 Overall Length (in): 3 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39733 SGS 39733 $24.56 SGS Each 17/64" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 17/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30822 SGS 30822 $14.81 SGS Each 3/16" Square-End Regular Length Carbide End Mill, 5/8" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 3/16 Overall Length (in): 2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30844 SGS 30844 $95.48 SGS Each 5/8" Square-End Regular Length Carbide End Mill, 1-1/4" L.O.C., 3-Flute, AlTiN Coated, SGS Series 5
Diameter (in): 5/8 Overall Length (in): 3-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30776 SGS 30776 $11.26 SGS Each 3/32" Square-End Regular Length Carbide End Mill, 9/32" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 3/32 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30789 SGS 30789 $25.55 SGS Each 19/64" Square-End Regular Length Carbide End Mill, 13/16" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 19/64 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30777 SGS 30777 $11.24 SGS Each 7/64" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 7/64 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30797 SGS 30797 $45.58 SGS Each 27/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 27/64 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39753 SGS 39753 $45.58 SGS Each 27/64" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 27/64 Overall Length (in): 2-3/4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30788 SGS 30788 $24.56 SGS Each 9/32" Square-End Regular Length Carbide End Mill, 3/4" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 9/32 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30507 SGS 30507 $10.62 SGS Each 1/16" Square-End Regular Length Carbide End Mill, 3/16" L.O.C., 3-Flute, Uncoated, SGS Series 5
Diameter (in): 1/16 Overall Length (in): 1-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
30794 SGS 30794 $30.63 SGS Each 3/8" Square-End Regular Length Carbide End Mill, 1" L.O.C., 3-Flute, TiCN Coated, SGS Series 5
Diameter (in): 3/8 Overall Length (in): 2-1/2 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30
39775 SGS 39775 $218.24 SGS Each 1" Square-End Regular Length Carbide End Mill, 1-1/2" L.O.C., 3-Flute, TiN Coated, SGS Series 5
Diameter (in): 1 Overall Length (in): 4 Type: Square-End Regular Length Carbide End Mill UNSPSC: 27112803 Shank Type: Round Center Cutting: Yes Helix Angle (deg): 30

* all information within this site (including price data) is provided as general guidance, with no guarantee of completeness, accuracy, or timeliness. For detailed specifications please review the product pdf datasheet where available.